SyncMaster 797MB/997MB
Main Page On -Screen D isplay Safety Instru ctions Troubleshooting Notationa l Check List Power Q& A Installation Self -Test F eature C heck Clean Oth er Intro ductio n Specifications Unpacking Ge nera l Spe cificatio ns Front PowerSaver Rear Preset T imin g Mode s Bottom Setup Information Conne cting the M onitor Service Installing the Monitor Driver Terms Automatic Regulato ry Manual Natural Color Base Installat ion Authority
Notational Power Installation Clean Oth er Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment.
When not used for extended periods of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. z Notationa l Power If the size of your monitor is small, or if the same image is present for long periods of time, you may see afterimages due to damage to the fluorescent substance on the inside of the CDT. Installation Clean Do not use a damaged or loose plug. Oth er z This may cause an electric shock or fire.
Do not cover the vents on the monitor cabinet. z Bad ventilation may cause a breakdown or fire. Notationa l Power Installation Clean Oth er Put your monitor in a location with low humidity and a minimum of dus t. z An electric shock or fire could result inside the monitor. Do not drop the monitor when moving it. z This may cause damage to the product or human body. Place the monitor on a flat and stable surface. z The monitor can cause injury by falling. Set down the monitor carefully.
Notationa l Power Installation Clean Oth er When cleaning the monitor case or the surface of the CDT, wipe with a slightly moistened, soft fabric. Do not clean Flat monitor with water. Use a water-dilute d m ild detergent. (S ome detergents contain significant amounts of alcohol-based solvents, which can damage (color change) or crack the monitor case. The antiglare/anti-static surface coating on the CDT may also be affected.) Dilute the detergent (1:10 ratio) with water before using.
Do not remove cover(or back). No user serviceable parts inside. z z Notationa l This may cause an electric shock or a fire. Refer servicing to qualified service personnel. Power Installation Clean Other If y our monitor doe s not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. z This may cause an electric shock or a fire. Do not plac e any heavy objects on the monitor.
Keep the monitor away from any magnetic substances. z This may cause discoloring or distortion of the image.
SyncMaster 797MB Monitor and S ta nd Power Cord Unpacking Front Stand Rear Bottom Quic k Setup Guide (S ome models include a stand attached. ) Please make sure the following items are included with your monitor. If any items are missing, contact your dealer .
SyncMaster 997MB Monitor and S ta nd Power Cord Unpacking Front Stand Rear Bottom Signal Cable (Option) (S ome models include a stand attached. ) Please make sure the following items are included with your monitor. If any items are missing, contact your dealer .
Unpacking Front Rear Bottom 1. Menu button 2. Adjust buttons 3. Enter button 4. Power button 5. Power indicator Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu. These buttons allow you to highlight and adjust items in the menu. Used to select the OSD menu. Use this button for turn the monitor on and off. This light glows green during normal operation, and blinks green once as the monitor saves your adjustments.
Ge nera l BNC C onne cto rs (Option) Unpacking SyncMaster 797MB/997MB General Front Rear Bottom (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. Signal Cable Connect the signal cable to the video port on your computer, video board, video card, or graphics card.
Unpacking Front Rear Bottom 1. Signal Cable 2. Power port 3. Tilt/Swivel Base Connect the signal cable to the video port on your computer, video board, video card, or graphics card. Connect the power cord for your monitor to the power port on the back of the monitor. You can separate the base from the monitor.
Ge nera l BNC C onne cto rs (Option) Connecting the Monitor General Installing the Monitor Driver SyncMaster 797MB/997MB Base Installat ion 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connect the signal cable to the video port on your computer, video board, video card, or graphics card. 3.
pins on your adapter(Adapter not included). A PC-compatible computer does not need an adapter. 4. When you use a BNC connector. Connect the signal cable to the BNC signal port on the back of your monitor/computer. 5. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
Conne cting Your Monitor Whe n prompte d by the operating system for the monitor driver, insert the CD-ROM inc luded with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Installing the Monitor Driver Base Installat ion Prepare a blank disk and download the driver program file at the Internet web site shown here. z Internet web site : http://www.samsung-monitor.
4. Click the "Ins tall" button in the "Warning" window. 5. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung-monitor.com/. 6. Monitor driver installation is completed.
Wind ows XP Conne cting Your Monitor Installing the Monitor Driver | Wind ows 200 0 | Wind ows Me | Wind ows NT | Lin ux Whe n prompte d by the operating system for the monitor driver, insert the CD-ROM inc luded with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Base Installat ion Prepare a blank disk and download the driver program file at the Internet web site shown here.
5. Click "Update Driver.." and select "Ins tall from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next " and then click "Have disk". 7. Click the "Browse " button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next " button. 8. If you can see following "Message" window, then click the "Continue Anyway " button. Then click "OK" button.
This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung-monitor.com/. 9. Click the "Close " button then click "OK" button continually. 10. Monitor driver installation is completed. Mic rosoft ® ® Windows 2000 Operating System Whe n you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Ins ert disk" window. 2.
7. 8. 9. 10. Choose "Display a list of all the driver in a specific location.." then click "Next " button. Click the "Have Disk" button Specify A:\(D:\driver) then click "OK" button. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK". 11. Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue box.
Tilt/ Swive l Ba se Conne cting Your Monitor Installing the Monitor Driver Base Installation | Attachin g and R emoving th e Base With the built -in pe destal, you can tilt and/or swivel the monitor for the most comfortable viewing angle. Note: The base is detachable. If y our monitor was supplied with the base detached, attach the base as follows. Remove the twist-tie before attaching the base to the monitor.
Attaching the Base 1. 2. 3. 4. Place the monitor upside-down on a flat work surface. Align the tabs on the base with the corresponding slots on the bottom of the monitor. Press the base onto the monitor until the tabs are fully engaged in the slots. Push the base toward the front of the monitor until the release latch clicks into the locked position. * Do not bend the snap. Removing the Base 5. Squeeze and pull up on the release latch on the base. 6.
SyncMaster 797MB User con trol butt ons Direct-Access Fe ature s OSD Fu nction s MagicTune ™ Adju sting Yo ur Monitor Highligh t III User co n tro l bu tto ns 1. Op ens the OSD menu. Also used t o exit the OSD m enu or return to the previous men u. 2. These b uttons allow you t o highlig ht and a dju st item s in t he men u. 3. Used to select the OSD men u. a. MagicBright2 ™ is a ne w fea ture providing opt imu m vie wing environ ment d epending on the con tents of th e im age you are watching.
| MagicBright2™ | Mag icBrig ht2™ Then push the MagicBright2 ™ button a gain to circle through a vailable preconfigured modes. | Highlight III | Hig hlig ht III OSD Fu n ctio ns The Highligh t Zo ne ensures the clear and sharp displa y o f animate d multimedia or photo ima ges by enhan cing t he brig htness of a certain area on th e screen.
osd Descrip tion Adju st t he Bright ness. Adju st t he Co ntrast. A "Mo iré" pattern can app ear on your screen, looking like a series of concent ric circles or arcs. To eliminat e this pattern, use the horizonta l m oire ad justme nts. A "Mo irë" pattern can app ear on your screen, looking like a series of concent ric circles or arcs. To eliminat e this pattern, use the vertical moire a dju stm ents. The Degau ss fea ture will remove color im purities caused by mag netic fie lds.
Used to a dju st the mon ito r color sett ing .(R ed) Used to a dju st the mon ito r color sett ing .(Green) Used to a dju st the mon ito r color sett ing .(Blue) When you a dju st t he Bright ness and C ontra st after sR GB mode is select ed, sRGB mo de exits. osd Descrip tion Follow th ese in structions to chang e the ho rizontal positio n of the monitor's entire disp lay. Follow th ese in structions to chang e the vetical position of the m onitor's entire display.
OSD Descrip tion Used to t urn t he Highlight Z one f eatures on or off. Note : When "OFF " is selected, th e user can not choose a ny other Highlight Z one features. This function is to move th e Highlight Z one h orizontally. This function is to move th e Highlight Z one vertically. This function is to adjust the horizontal size of the H ighligh t Zon e. This function is to adjust the vertica l size of the Highlig ht Z one. This function is to execute th e Highlight Z one.
SyncMaster 997MB User con trol butt ons Direct-Access Fe ature s OSD Fu nction s MagicTune ™ Adju sting Yo ur Monitor Highligh t III User co n tro l bu tto ns 1. Op ens the OSD menu. Also used t o exit the OSD m enu or return to the previous men u. 2. These b uttons allow you t o highlig ht and a dju st item s in t he men u. 3. Used to select the OSD men u. a. MagicBright ™ is a ne w fea ture providing opt imu m vie wing environ ment d epending on the con tents of th e im age you are watching.
| MagicBright ™ | Mag icBrig ht™ Then push the MagicBright ™ button a gain to circle through a vailable preconfigured mod es. | Highlight III | Hig hlig ht III OSD Fu n ctio ns The Highligh t Zo ne ensures the clear and sharp displa y o f animate d multimedia or photo ima ges by enhan cing t he brig htness of a certain area on th e screen.
OSD Descrip tion Adju st t he Bright ness. Adju st t he Co ntrast. A "Mo iré" pattern can app ear on your screen, looking like a series of concent ric circles or arcs. To eliminat e this pattern, use the horizonta l m oire ad justme nts. A "Mo irë" pattern can app ear on your screen, looking like a series of concent ric circles or arcs. To eliminat e this pattern, use the vertical moire a dju stm ents. The Degau ss fea ture will remove color im purities caused by mag netic fie lds.
OSD Descrip tion Color temperature is a measure of th e 'w arm th' o f the imag e colo rs. T he availa ble ran ge is betw een 5 000 to 9300K. Used to a dju st the mon ito r color sett ing .(R ed) Used to a dju st the mon ito r color sett ing .(Green) Used to a dju st the mon ito r color sett ing .(Blue) When you a dju st t he Bright ness and C ontra st after sR GB mode is selected, sRGB m ode exits.
OSD Descrip tion Used to t urn t he Highlight Z one f eatures on or off. Note : When "OFF " is selected, th e user can not choose a ny other Highlight Z one features. This function is to move th e Highlight Z one h orizontally. This function is to move th e Highlight Z one vertically. This function is to adjust the horizontal size of the H ighligh t Zon e. This function is to adjust the vertica l size of the Highlig ht Z one. This function is to execute th e Highlight Z one.
Overview | Installation | OSD Mode | Uninstall | Troubleshooting Overview What is MagicTune™? Monitor performance can v ary due to the graphics card, host c omputer lighting conditions and other environmental factors . In order to get the best image on a monitor requires you to adjust it for your unique setting. Unfortunately, the manual controls av ailable to tune the image often prove to be c hallenging.
Overview | Installation | OSD Mode | Uninstall | Troubleshooting Installation 1. Ins ert the installation CD into the CD-ROM drive. 2. Click the MagicTune™ installation file. 3. Select installation Language, Click "Next". 4. When the InstallationShield Wizard window appears, click "Next." 5. Select "I agree to the terms of the license agreement" to accept the terms of use.
6. Choose a folder to install the MagicTune program. 7. Click "Ins tall." 8. The "Installationation Status" window appears.
9. Click "Finish." 10. When the installation is complete, the MagicTune 2.5 executable icon appears on y our desktop. Double -click the ic on to start the program. Magic tune ex ecution icon may not appear depending on specification of computer sys tem or monitor. If that happens, pres s F5 Key. 11. The following window appears if the installation is successful.
12. The following error message indicates that the system is using a video card that is not supported by MagicT une. Installationation Problems The ins tallation of MagicTune™ 2.5 can be affected by such factors as the v ideo card, motherboard and the network environment. See "Troubleshooting" if you have trouble during installation.
Overview | Installation | OSD Mode | Uninstall | Troubleshooting MagicTune allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you. z OSD mode may appear inconsistent with the explanation in guidance book depending on specification of each monitor. OSD Mode The OSD mode makes ers the adjustment of settings on all monitors easy.
Cancel not made any changes in the control window, clicking "Cancel" does not cause any actions. Picture Tab Definition Allows the user to adjust the screen settings to the desired values. Brightness MagicBright Contrast Brightnes s Makes the entire screen brighter or darker. The detailed data of the images in the dark areas can be lost if the brightness is not adjusted to the proper level. Adjust the brightness for best viewing conditions.
and graphics. 3. Game: For watching motion pictures such as a Game. 4. Entertain: For watching motion pictures such as a DVD or VCD. MagicBright™ z Less than 19" 1. Text: For documentations or works involving heavy text. 2. Internet: For working with a mixture of images such as text and graphics. 3. Entertain: For watching motion pictures such as a DVD or VCD. Color Tab Definition Adjusts the "warmth" of the monitor background or image color.
Image Tab Definition Adjusts the Position, Size and Rotation values. Geometry 1 Rotation Size Geometry 2 Pincushion Position Pinbalance Trapezoid Parallelogram Other Moire Degauss Sidepin Corner Top Sidepin Corner Bottom Pinbalance Corner Top Pinbalance Corner Bottom Adjusts the Position, Size and Rotation values.
z z Pinbalance Corner Top Pinbalance Corner Bottom Option Tab Definition You can configure MagicTune using the following options. Loads the Preferences Dialog Box. Preferences in use will have an "V" in the check box. To turn on or o ff any Preference, position the cursor over the box and click. Preferences z z Enable task tray menu . - To access the MagicTune menus, click the icon on the [task tray menu].
Help Visit the MagicTune website or click to open the Help files (User Manual) if you need any help installing or running MagicTune. The User Manual opens within a basic browser window. Asset ID Opens a monitor info window showing the manufacturing date of the monitor. Version Displays the version number of MagicTune.
Overview | Installation | OSD Mode | Uninstall | Troubleshooting Uninstall The MagicTune program can be removed only by using the "Add or Remove Programs" option of the Windows Control Panel. Perform the following steps remove MagicTune. 1. Go to [Task Tray] ' [Start] ' [Settings] and selec t [Control Panel] in the menu. If the program runs on Windows XP, go to [Control Panel] in the [Start] menu. 2. Click the "Add or Remove Programs" icon in Control Panel. 3.
Overview | Installation | OSD Mode | Uninstall | Troubleshooting Troubleshooting MagicTune may not work in case monitor is replaced or driver of graphic card is updated while MagicTune is operating. If so, please restart the system. Check when MagicTune does not function properly. * MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and Play.
Automatic detect Manual detect Exit Program Auto Detect Picture Setting F ull Screen Highlight Off Other Features The H ighligh t Zon e e ns u re s the c le a r a nd s ha rp d is pla y of a nim a te d m ultim e dia or pho to im a ge s by e nha nc ing the br ight ne ss o f a ce r ta in a r e a o n the s c r e en . H ig hlight Zone III fe a tur e s a c o m bina tio n of t he cir c uitr y an d the pr og ra m bu ilt on t he pr opr iet a ry te c hn ology of SE C .
Automatic detect Manual detect Exit Program Auto Detect Picture Setting Full Screen Highlight Off Other Features The Highlight Zone ensures the clear and sharp display of animated multimedia or photo images by enhancing the brightness of a certain area on the screen. Highlight Zone III features a combination of the circuitry and the program built on the proprietary technology of SEC.
Automatic detect Manual detect Exit Program Auto Detect Picture Setting F ull Screen Highlight Off Other Features A utom a t ic d et e c t 1. Wh e n the H i g hl i gh t p ro g ra m is ru n n in g , th e m o n i to r au to m a tic a ll y d e te cts th e vi d e o -pl a yi n g p o rti o n of y o u r m ul tim e d i a p ro g r am a n d ac tiv a te s th e H ig h li g h t Z o ne fe a tu re . N o se le c tio n is n e ce ss a ry.
Automatic detect Manual detect Exit Program Auto Detect Picture Setting F ull Screen Highlight Off Other Features Ma nu al d et e c t In M a n u al D e te ct m o de , y o u c a n e i th er se l ec t a w in d o w o r u se th e D ra g fu n c tio n to c re a te a H ig h li g h t Z o ne . 1. 2. Se l ec tin g a w in d o w : C li ck th e H i g h li g ht i co n ( )o n th e W in d o w s ta sk b a r o n ce to ac tiv a te ( )th e c u rs or .
Automatic detect Manual detect Exit Program Auto Detect Picture Setting F ull Screen Highlight Off Other Features Ex it P r ogr a m 1. Ex its th e H i gh l ig h t p ro g ra m .
Automatic detect Manual detect Exit Program Auto Detect Picture Setting F ull Screen Highlight Off Other Features A uto D e te c t 1. Al lo w s us e r to d is ab l e Au to D e te ct w h e n n e c es sa r y. On ce s el e cte d , th is fu n c tio n sa v es th e s e le c tio n a nd k e ep s it i n th e m e m or y re g a rd l e ss o f e x iti ng o r r es ta rti ng th e p ro g ra m . Wh e n se le c te d, a c he c k m a rk (V) a pp e a rs .
Automatic detect Manual detect Exit Program Auto Detect Picture Setting F ull Screen Highlight Off Other Features Pic tur e S et ting 1. C an b e se l e cte d on l y w h e n th e H i g h li g h t Z on e fu n cti o n i s o n . Wh e n se l e cte d , a me n u w in d o w a p p ea r s w h ic h ca n b e u s e d to a d ju s t C on tr as t an d S h ar p ne s s w i th in th e H i g h li g h t Z on e .
Automatic detect Manual detect Exit Program Auto Detect Picture Setting F ull Screen Highlight Off Other Features Full Sc r e e n 1. Fu ll Sc re e n : P l a ce th e c u rs or on th e H ig h l ig h t ic o n ( )o n th e W in d o w s ta sk b a r a n d r ig h t cl ic k y o ur mo u s e o n c e . T h en s e le ct Fu l l S cr e e n fr om th e me n u .
Automatic detect Manual detect Exit Program Auto Detect Picture Setting F ull Screen Highlight Off Other Features H ig hlight Off 1. C an c e ls th e s el e cti o n o f a H i gh l ig h t Zo n e a nd r ev e rts to th e o rig i n a l sc re e n .
Automatic detect Manual detect Exit Program Auto Detect Picture Setting F ull Screen Highlight Off Other Features Othe r Fe a tur e s Th e H i g h li g h t Z on e fu n cti o n r e me m b e rs th e va r ia b le s o f th e s el e cte d a re a s i n A u to m ati c a n d M an u a l D ete c t mo d e s, r es p e cti ve ly . 1. 2. 3. If th e w in d o w se l e cte d a s a H ig h l ig h t Zo n e is m o v ed o r i ts s iz e ch a n ge d , th e H ig h li g h t Zo n e c h a ng e s ac co r di n g ly .
Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call, the phone number on the Information section or contact your dealer. Check List Q& A Self-Test F eature Check Sym ptom No images on the screen. I cannot turn on the monitor. Che ck Lis t Solutions Is the power cord connected properly? Check the power cord connection and supply. Can you see " screen? Check the signal cable connection.
The screen suddenly has become unbalanced. Have the screen colors become stra nge after running a program or due to a crash between applications? Reboot the computer. Has the video card been set properly? Set the video card by referring to the video card manual. Have you changed the video card or the driver? Adjust screen image position and size using the OSD. Have you adjusted the re solution or frequency to the monitor? Adjust the resolution and frequency at the video card.
2. Once the Highlight Zone has been switched off, you can't select any of the other menus within the Hightlight Zone. 3. When the Highlight Zone function is operated, the surrounding brightness of screen may become dark. 4. Depending on the video card you use, a color saturation phenomenon may occur in the Highlight Zone. In this case, slightly lower the contrast of the Highlight Zone and the color saturation will be reduced. Note: If problems repeatedly occur, contact an authorized service center.
General Q & A | Highlight Zone III Q & A 1. General Q & A Check List Q&A Self-Test Feature Check Question How can I change the frequency? Answer Frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? Windows ME/XP/2000: Set the resolution at the Control Panel, Display, Settings.
automatically activate. When selected, the Highlight Zone function is not automatically activated. The function may not be activated automatically for some multimedia programs. In this case, use Manual Detect instead. See Manual Detect under (Highlight Zone III) Check the color settings and see if sRGB is selected. When sRGB is selected, the Highlight Zone III function remains de-activated in order to maintain the sRGB color attributes.
Self -Test F eature C heck Check List Q& A Self-Test Feature Check | Warning Messa ges | Environmen t | Useful Tips Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor. If your monitor works normally, the following screen appears.
z z A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Sync. Out of Range, etc. In this case, first check the source of the problem, and then contact a service center or your dealer. Judging the monitor's working condition If there is no image on the screen or a "Sync.
General Model Name General SyncMaster 797MB Picture Tube PowerSaver Typ e 17"(43cm) DynaFlat (40.6cm viewable) Preset T imin g Modes Deflection angle 90 ° Dot Pitch 0.20mm (Horizontal) Screen type Aluminized tri-color phosphor dot trio with black matrix. Anti-doming invar shadow mask. Multi-layer coated with anti-static.
General Model Name General SyncMaster 997MB Picture Tube PowerSaver Typ e 19"(48cm) DynaFlat (45.8cm viewable) Preset T imin g Modes Deflection angle 90 ° Dot Pitch 0.20mm (Horizontal) Screen type Aluminized tri-color phosphor dot trio with black matrix. Anti-doming invar shadow mask. Multi-layer coated with anti-static.
SyncMaster 797MB Ge nera l PowerSaver Preset T imin g Modes This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
SyncMaster 997MB Ge nera l PowerSaver Preset T imin g Modes This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Ge nera l Table 1. Preset Timing Modes PowerSaver Preset Timing Modes Horizontal Frequency (k Hz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V ) VESA, 640 x 480 37.500 75.000 31.
Service Terms Regulato ry Natural Color Authority AUS TRALIA : Samsung Electronics Australia Pty Ltd. Customer Response Centre 7 Parkview Drive, Homebush Bay NSW 2127 Tel : 1300 362 603 http://www.samsung.com.au/ BRAZIL : Samsung Eletronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto. Antonio, CEP : 04719-040 Sao Paulo, SP SAC : 0800 124 421 http://www.samsung.com.br/ CANADA : Samsung Electronics Canada Inc.
1039, Budapest, Lehel u. 15-17. Tel: 36 1 453 1100 Fax: 36 1 453 1101 http://www.samsung.hu/ ITALY : Samsung Electronics Italia S.p.a. Via C. Donat Cattin, 5 20063 Cernusco s/Naviglio (MI) Servizio Clienti: 199.153.153 http://www.samsung-italia.com/ MEXICO : SAMSUNG ELECTRONICS MEXICO. S.A. DE C.V. Saturno NO.44, Col. Nueva Industrial Vallejo Gustavo A.Madero C.P.07700, Mexico D.F. Mexico TEL. 52-55-5747-5100 Fax. 52-55-47 52 02 RFC: SEM950215S98 http://www.samsung.com.
THAILAND : HAI SAMSUNG SERVICE CENTER MPA COMPLEX BUILDING,1st-2nd Floor 175 SOI SUEKSA VIDHAYA SATHON SOI 12 SILOM ROAD ,SILOM,BANGRAK BANGKOK 10500 TEL : 0-2635-2567 FAX : 0-2635-2556 UKRAINE : SAMSUNG ELECTRONICS REPRESENTATIVE OFFICE IN UKRAINE 4 Glybochitska str. Kiev, Ukraine Tel. 8-044-4906878 Fax 8-044-4906887 Toll-free 8-800-502-0000 http://www.samsung.com.ua/ United Kingdom : Samsung Electronics (UK) Ltd. Samsung House, 225 Hook Rise South Surbiton, Surrey KT6 7LD Tel. : (0208) 391 0168 Fax.
Dot Pitc h Service The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Terms Vertical Frequency Regulato ry The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called Vertical Frequency or Refresh Rate.
Regulatory Service Terms Regulatory FCC Info rmat ion | IC C omplia nce Notice | MPR II Comp liance | Europ ean N otice (Europe on ly) | PCT Notice | VCCI | CCC Not ice TCO'95 -Ecological req uireme nts for p ersona l com puters (T CO'95 applie d mod el o nly) TCO'99 -Ecological req uireme nts for p ersona l com puters (T CO'99 applie d mod el o nly) TCO'03 -Ecological req uireme nts for p ersona l com puters (T CO'03 applie d mod el o nly) TCO'03 R ecyclin g Information (TC O'03 applie d mode l o nly)
(parallel blades) plug c ap. For 240 Volt applications use only UL Listed Detachable power supply c ord with NEMA configuration 6 -15P type (tandem blades) plug cap. IC Compliance Notice This Class B digital apparatus meets all requirements of the Canadian Interferenc e-Causing Equipment Regulations of ICES -003. Cet appareil Num érique de classe B res pecte toutes les exigences du Règlemont NMB-03 sur les équipements produisant des interférenc es au Canada.
TCO'95 -Ecological requirements for personal com puters (TCO'95 applied model only) AB general r equirem ents AB2 Written Eco -docum ent acom panying the pr oducts Congratulations! You have jus t purchased a TCO'95 approv ed and labelled product! Your choice has prov ided y ou with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and to the further dev elopment of environmentally -adapted electronic products.
z TCO'95 requirement Permits the inclusion of lead since no replacement has yet been developed. Cadmium Cadmium is present in rechargeable batteries and in the colour generating layers of certain computer displays. Cadmium damages the nerv ous system and is toxic in high doses. TCO'95 requirement states that batteries may not contain more than 25 ppm (parts per million) of cadmium. The colour-generating layers of display screens must not contain any cadmium.
TCO Developm ent SE-114 94 Stoc kholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ Environm ental requirements Flam e retardants Flame retardants are present in printed c ircuit boards, cables, wires, casings and hous ings. Their purpos e is to prevent, or at least to delay the s pread of fire.
reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability .
Natural Color Software Program Service Terms Regulato ry Natural Color Authority One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI).
Informa tion in this doc ument is subject to change without notice. © 2004 Samsung Electronics Co., Ltd. All rights reserved. Service Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Terms Regulato ry Natural Color Authority Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.