Smart Signage User Manual (By Model) This manual provides information about your Smart Signage including supported types and product specifications per model. QBR (QB43R QB49R QB50R QB55R QB65R QB75R QB85R QB98R) QER (QE82R) QMR (QM32R QM43R QM49R QM50R QM55R QM65R QM75R QM85R) QMR-T (QM32R-T QM43R-T QM55R-T) The colour and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance.
Table of contents Preparations Checking the Components 3 Parts QM32R/Q*43R/Q*49R/Q*50R/Q*55R/ Q*65R/Q*75R/Q*85R/QE82R/QM32R-T/ QM43R-T/QM55R-T QB98R Anti-theft Lock 4 Ports Q*43R/Q*49R/Q*50R/Q*55R/Q*65R/ Q*75R/Q*85R/QE82R QM32R QB98R QM32R-T QM43R-T/QM55R-T 7 Control menu 12 Administrator menu (Supported models: QMR-T) 13 Precautions when handling the panel 14 Before Installing the Product (Installation Guide) Tilting Angle and Rotation Ventilation 15 15 15 Installing the Wall Mount Preparing
Chapter 01 Preparations Checking the Components "" Contact the vendor where you purchased the product if any components are missing. "" The appearance of the components may differ from the images shown. Quick Setup Guide Warranty card (Not available in some locations) Regulatory guide Power cord "" A stand is not provided with the product. To install a stand, you can purchase one separately. "" The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable.
Parts "" The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. QM32R/Q*43R/Q*49R/Q*50R/Q*55R/ Q*65R/Q*75R/Q*85R/QE82R/QM32R-T/ QM43R-T/QM55R-T Remote sensor Parts Remote sensor Power button Description Press a button on the remote control pointing at the sensor on the front of the product to perform the corresponding function.
QB98R "" The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Parts ON/OFF Spacer logo Description Do not pull on the spacer logo using force. The logo may tear or break off. Press a button on the remote control pointing at the bottom of the product face to perform the function. The remote control sensor is located on the bottom of the product.
Anti-theft Lock "" An anti-theft lock allows you to use the product securely even in public places. "" The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. "" The following images are for reference only. Real-life situations may differ from what is shown in the images.
Ports Port Description Connect to a USB memory device. Q*43R/Q*49R/Q*50R/Q*55R/Q*65R/ Q*75R/Q*85R/QE82R "" The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. QB43R / QB49R / QB50R / QB55R / QB65R / QB75R / QB85R QE82R QM43R / QM49R / QM50R / QM55R / QM65R / QM75R / QM85R USB 1 ¨(1.0A) "" The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work.
QM32R "" The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect to a USB memory device. USB 1 ¨(1.0A) "" The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work. HDMI IN 1 (ARC) Connects to a source device using a HDMI cable or HDMI-DVI cable. Connects to MDC and the Internet using a LAN cable.
QB98R "" The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to MDC and the Internet using a LAN cable. (10/100 Mbps) RJ45 "" Use Cat7(*STP Type) cable for the connection. *Shielded Twist Pair. Connect to a USB memory device. USB 1 ¨(1.0A) "" The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work.
QM32R-T "" The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect to a USB memory device or TOUCH OUT cable. USB 1 ¨(1.0A) "" The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work. HDMI IN 1 (ARC) Connects to a source device using a HDMI cable or HDMI-DVI cable. Connects to MDC and the Internet using a LAN cable.
QM43R-T/QM55R-T "" The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect to a USB memory device or TOUCH OUT cable. USB 1 ¨(1.0A) "" The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work. Connects to MDC and the Internet using a LAN cable. (10/100 Mbps) RJ45 "" Use Cat7(*STP Type) cable for the connection.
Control menu Items Description Power off the product. "" The power button(«) is located on the bottom of the product. "" If you press the power button on the product when the product is turned on, the control menu will be displayed. Power off •• With the control menu screen displayed, briefly press the power button to Power off, and then press and hold the power button to move the cursor to turn off the product. Select the connected input source.
Administrator menu (Supported models: QMR-T) "" Touching and holding on the screen when the product is turned on displays the administrator menu. "" If the touchscreen control is not available, use the remote control to go to System → Touch Control → Touch Control and select On from the OSD menu. Buttons Volume Home Menu Home Menu Source •• Select Volume from the administrator menu. Enter Home screen. •• Select Home from the administrator menu. To change settings, select a menu item.
Precautions when handling the panel "" The colour and the appearance may differ depending on the model. Do not stand the product as shown in the image. The panel is fragile and can get damaged. Lay the product down to handle it as shown in the image. (the packaging can be used). "" Supported models: 85 inches or more Ensure you use the handles on the back when moving the product. "" Supported models: 85 inches or more 15 mm Do not hold or grasp any area of the product within 15 mm from the front.
Before Installing the Product (Installation Guide) Ventilation "" Contact Samsung Customer Service Centre for further details. Installation on a Perpendicular Wall To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. A Minimum 40 mm •• Ensure that an authorised installation company installs the wall mount. B Ambient temperature: Under 35 °C •• Otherwise, it may fall and cause personal injury.
Installing the Wall Mount Preparing before installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring. "" For the QM32R-T, QB85R, QM85R and 82-inch models that it does not provide Holder-Ring(A). A Installing the Wall Mount •• The wall mount kit (sold separately) allows you to mount the product on the wall. •• The provided image is only for reference. For detailed information on installing the wall mount, see instructions provided with the wall mount.
Wall Mount Kit Specifications (VESA) •• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided. "" Install your wall mount on a solid wall perpendicular to the floor. To install the product on the other wall area, contact the nearest agency. If you install the product on a slanted wall, it may fall and result in severe personal injury.
Chapter 02 Using a touchscreen monitor (Supported models: QMR-T) Touchscreen monitor Connecting the touch overlay Control a PC by tapping the screen instead of using an input device such as a keyboard or mouse. The touch screen functions by detecting a minute electric current that runs through your body (capacitive). Make sure to use the surface of your finger tip when tapping the screen. "" Touch functions are not supported in applications other than the OSD menu and administrator menu.
Connecting the touchscreen monitor "" Connecting parts may differ in different products. Connecting to a PC 2 Connect the power cable from the product to the power outlet. 3 After the power supply is connected, the product automatically detects and switches to the connected input source. "" If the screen appears blank, turn the product off and then on again. 4 Connect the TOUCH OUT PC port on the product to a USB port on the PC using the TOUCH OUT cable.
Configuring the touchscreen monitor settings To properly use the touch function of the product in Windows, go to Tablet PC Settings and calibrate the product. "" First connect the touchscreen monitor before configuring the following settings. "" The maximum number of touchscreen monitors that can be connected simultaneously varies, depending on the operating system and graphics card settings. "" If Tablet PC Settings is not found in Control Panel, search for Tablet PC Settings from Search Control Panel.
3 Select the product from Display under Display options. Next, select Calibrate. 5 After calibration is complete, the message Do you want to save the calibration data? appears. Select Yes. Digitizer Calibration Tool Do you want to save the calibration data? Yes No 6 The touchscreen monitor has been calibrated successfully. "" Selecting Reset will remove the calibration data. 4 Perform calibration following the onscreen instructions displayed as shown in the image.
Chapter 03 Specifications General Model Name Panel Size Display area Model Name Panel Size Display area Model Name Panel Size Display area QM32R / QM32R-T QB43R / QM43R / QM43R-T QB49R / QM49R QB50R / QM50R 32 CLASS (31.5 inches / 80.1 cm) 43 CLASS (42.5 inches / 107.9 cm) 49 CLASS (48.5 inches / 123.2 cm) 50 CLASS (49.5 inches / 125.7 cm) 698.4 mm (H) x 392.85 mm (V) 941.184 mm (H) x 529.416 mm (V) 1073.78 mm (H) x 604.0 mm (V) 1095.84 mm (H) x 616.
Model Name Resolution Optimum resolution Maximum resolution QM32R / QM32R-T QB43R / QB49R / QB50R / QB55R / QB65R / QB75R / QE82R / QB85R QB98R / QM43R / QM49R / QM50R / QM55R / QM65R / QM75R / QM43R-T / QM55R-T / QM85R 3840 x 2160 @ 60 Hz (HDMI) 3840 x 2160 @ 60 Hz (DisplayPort) 1920 x 1080 @ 60 Hz (DVI) 3840 x 2160 @ 60 Hz (HDMI) 1920 x 1080 @ 60 Hz (DVI) 3840 x 2160 @ 60 Hz (HDMI) 3840 x 2160 @ 60 Hz (DisplayPort) AC100-240V~ 50/60Hz Refer to the label at the back of the product as the standard
•• Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimises the monitor settings. Monitor installation takes place automatically. However, you can customise the installation settings if desired. •• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect product performance.
Preset Timing Modes The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power indicator on. In such a case, change the settings according to the following table by referring to the graphics card user manual. "" DVI port is not supported on the QM32R, QM32R-T models.
Chapter 04 Appendix Licence Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Open Source Licence Notice In the case of using open source software, Open Source Licences are available on the product menu.