User's Manual
Table Of Contents
- English
- Before Reading This User Manual
- Warning! Important Safety Instructions
- 01 Package Content
- 02 TV Installation
- 03 The Remote Control
- 04 Initial Setup
- 05 Troubleshooting and Maintenance
- Troubleshooting
- The TV won’t turn on.
- There is no picture/video/sound, or a distorted picture/video/sound from an external device, or “Weak or No Signal” is displayed on the TV, or you cannot find a channel.
- The remote control does not work.
- The cable box or satellite box remote control doesn’t turn the TV on or off or adjust the volume.
- The TV settings are lost after 5 minutes.
- Intermittent Wi-Fi
- Video App problems (Youtube etc)
- What is Remote Support?
- Eco Sensor and screen brightness
- Caring for the TV
- Troubleshooting
- 06 Specifications and Other Information
- Español
- Antes de leer este manual del usuario
- ¡Advertencia! Instrucciones de seguridad importantes
- 01 Contenido del paquete
- 02 Instalación del televisor
- 03 El control remoto
- 04 Configuración inicial
- 05 Solución de problemas y mantenimiento
- Solución de problemas
- El televisor no se enciende.
- No hay imagen/video/sonido o hay distorsión en imagen/video/sonido de un dispositivo externo o en el televisor se muestra “Señales Débiles o Inexistentes” o no se encuentra el canal.
- El control remoto no funciona.
- El control remoto del receptor de cable o decodificador no enciende ni apaga el televisor, ni ajusta el volumen.
- La configuración del televisor se pierde luego de 5 minutos.
- Wi-Fi intermitente
- Problemas con aplicaciones de video (Youtube, etc.)
- ¿Qué es el soporte técnico remoto?
- Sensor Eco y brillo de la pantalla
- Cuidado del televisor
- Solución de problemas
- 06 Especificaciones y otra información
English - 15
The remote control does not work.
• Check if the power indicator at the bottom of the TV blinks when you press the remote's Power button. If it does
not, replace the remote control's batteries.
• Make sure that the batteries are installed with their poles (+/–) in the correct direction.
• Try pointing the remote directly at the TV from 5 ft. to 6 ft. (1.5-1.8 m) away.
The cable box or satellite box remote control doesn’t turn the TV on or off or adjust the volume.
• Program the cable box or satellite box remote control to operate the TV. Refer to the cable box or satellite box user
manual for the SAMSUNG TV code.
The TV settings are lost after 5 minutes.
• The TV is in the Retail Mode. Change the Usage Mode in the System Manager Menu to Home Mode ( >
Settings > General > System Manager > Usage Mode > Home Mode).
Intermittent Wi-Fi
• Make sure the TV has a network connection ( > Settings > General > Network > Network Status).
• Make sure the Wi-Fi password is entered correctly.
• Check the distance between the TV and the modem or access point. The distance should not exceed 50 ft (15.2 m).
• Reduce interference by not using or turning off wireless devices. Also, verify that there are no obstacles between
the TV and the modem or access point. (The Wi-Fi strength can be decreased by appliances, cordless phones, stone
walls/fireplaces, etc.)
Single story Multi story
Wireless access point
Wireless repeater
• Contact your Internet Service Provider (ISP) and ask them to reset your network circuit to re-register the MAC
addresses of your new modem or access point and the TV.