User Manual (ver.1.0)

20
English
Basic Features
Speaker Select (External Speaker /
TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎ When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎ When Speaker Select is set to External Speaker.
x
TV Speaker: Off, External Speaker: On
✎ When Speaker Select is set to TV Speaker.
x
TV Speaker: On, External Speaker: On
✎ If there is no video signal, both speakers will be mute.
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu
 Setting the Time
 MENU  → Setup → Time → ENTER 
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
 The current time will appear every time you press
the INFO button.
✎ If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
✎ The antenna must be connected in order to set
the time automatically.
– Manual: Set the current time manually.
✎ Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
✎ Available only when Clock Mode is set to
Manual.
✎ You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
Time Zone: Select your time zone.
✎ This function is only available when the
Clock Mode is set to Auto.
DST (Daylight Saving Time) (Off / On): Switches the
Daylight Saving Time function on or off.
✎ This function is only available when the
Clock Mode is set to Auto.
 Using the Sleep Timer
 MENU  → Setup → Time → Sleep Timer →
ENTER

■ Sleep Timer

: Automatically shuts off the TV
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎ To cancel the Sleep Timer, select Off.
 Setting the On/Off Timer
 MENU  → Setup → Time → Timer 1 →
ENTER 
You can set the TV to turn on automatically at a preset time.
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
10 TV Cable 3
00 00 am
00 00 am
▲
▼
Timer 1
On Time
Off Time
Volume
Inactivate
Inactivate
Sun Mon Tue Wed Thu Fri Sat
Once
Contents
Repeat
 Move  Adjust  Enter  Return
[LC500-NA]BN68-03219A-01L03.indb 20 2010-09-27 오전 10:49:41