User Manual (ver.1.0)

English - 10
Connecting a DVD Player/Set-Top Box via DVI
This connection can only be made if there is a DVI Output connector on the external device.
1.
Connect a DVI to HDMI
Cable or DVI-HDMI Adapter
between the HDMI/DVI IN
connector on the TV and the
DVI connector on the
DVD player/Set-Top Box.
2.
Connect Audio Cables
between the DVI IN
[R-AUDIO-L] jack on the
TV and the AUDIO OUT jacks
on the DVD player/
Set-Top Box.
Each DVD player/STB has a different back panel configuration.
When connecting a DVD player/STB, match the color of the connection terminal to
the cable.
When using an HDMI/DVI cable connection, you must use the HDMI/DVI IN terminal.
TV Rear Panel
DVD Player / Set-Top Box
Audio Cable
(Not supplied)
2
DVI to HDMI Cable (Not supplied)
1
Digital Audio System
TV Rear Panel
Optical Cable (Not supplied)
Connecting a Digital Audio System
1. Connect an Optical Cable
between the “DIGITAL
AUDIO OUT (OPTICAL)”
jacks on the TV and the
Digital Audio Input jacks on
the Digital Audio System.
When a Digital Audio
System is connected to the
“DIGITAL AUDIO OUT
(OPTICAL)” terminal:
Decrease the volume
of the TV, and adjust the
volume level with the
system’s volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration. .
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
BN68-01184A-Eng.indd 10 2007-02-13 �� 1:33:32