User Manual (ver.1.0)

English - 35
1. Press the MENU button to display the menu.
Press the or buttons to select "Setup", then press the ENTER
button.
Press the or buttons to select "PC", then press the ENTER
button.
Change to the PC mode first.
2. Press theor ▼ buttons to select "Auto Adjustment", then press the ENTER
button.
Press the EXIT
button to exit.
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.
The function also automatically ne-tunes the settings and adjusts the frequency values and positions.
This function does not work in DVI-Digital mode.
Setting up the TV with your PC
1. Press the MENU button to display the menu.
Press the or buttons to select "Setup", then press the ENTER
button.
Press the or buttons to select "PC", then press the ENTER
button.
Change to the PC mode first.
2.
Press the ENTER
button to select "Image Lock".
3.
Press the ▲ or ▼ buttons to select "Coarse" or "Fine", then press the ENTER
button.
Press the or buttons to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER
button.
Press the EXIT
button to exit.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the frequency adjustments to the utmost and fine tune again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of the screen.
Setup
▲More
Melody : Off
PC
HDMI Black Level
: Normal
Film Mode : Off
PIP
Function Help : On
▼More
TV
Move Enter Return
PC
Image Lock
Position
Auto Adjustment
Image Reset
Resolution :
1360 x 768@60Hz
TV
Move Enter Return
PC
Image Lock
Position
Auto Adjustment
Image Reset
Resolution :
1360 x 768@60Hz
TV
Move Enter Return
Image Lock
Coarse 50
Fine 0
TV
Move Enter Return
Auto Adjustment in Progress.
Please Wait
50
Move Adjust Return
Coarse
BN68-01184A-Eng.indd 35 2007-02-13 �� 1:34:20