User Manual (ver.1.0)

English - 51
SW Upgrade
Scanning for USB...
It may take up to 30 seconds.
▲More
Size : 16 : 9
Digital NR : Off
Reset : Cancel
PictureTV
Move Enter Return
▲More
Size : 16 : 9
Digital NR : Off
Reset : Cancel
PictureTV
Move Enter Return
Off
Low
Medium
High
Auto
TV Rear Panel
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
1. Press the MENU
button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the
or
button to select "Digital NR", then press the ENTER button.
3. Press the
or
button to select "Off", "Low", "Medium", "High", "Auto".
Press the ENTER button.
Off: Turns the screen noise reduction function off.
Low: Reduces screen noise at a low level.
Medium: Reduces screen noise at a medium level.
High: Reduces screen noise at a high level.
Auto: Automatically recognizes and reduces screen noise.
Press the EXIT button to exit.
Digital Noise Reduction
1. Insert a USB drive containing the firmware upgrade into the SERVICE prot
on the back of the TV.
2.
Press the MENU button to display the menu.
Press the
▲ or
buttons to select "Setup", then press the ENTER
button.
3.
Press the ▲ or ▼ buttons to select SW Upgrade, then press the ENTER button.
4.
Press the ENTER button.
The message Scanning for USB... It may take up to 30 seconds. is displayed.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will shut off and turn on automatically after
completing the firmware upgrade. Please check the firmware version after the
upgrades are complete.
Upgrading the Software
Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(7267864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a
USB drive to the USB port located on the back of your TV.
Setup
More
Light Effect : Watch Mode
SW Upgrade
TV
Move Enter Return
BN68-01184A-Eng.indd 51 2007-02-13 �� 1:34:52