Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLD-WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente. Country Customer Care Center Web Site CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca U.S.A 1-800-SAMSUNG (7267864) www.samsung.com Address Samsung Electronics Canada Inc.
Important Warranty Information Regarding Television Format Viewing Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
English Contents General Information ■ ■ ■ ■ ■ ■ Channel Control List of Features...................................................................2 Accessories........................................................................2 Viewing the Control Panel .................................................3 Viewing the Connection Panel . .........................................4 Remote Control..................................................................
General Information List of Features Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top/Cable Box needed. Remote Control The supplied remote can be used to operate the TV as well as most DVD players, Set-Top boxes, Cable Boxes and VCRs.
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. 1 2 3 4 76 5 1 2 3 4 6 5 5 7 The product color and shape may vary depending on the model.
Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 6-11. [Side Panel Jacks] 1 AUDIO OUT Connects to the audio input jacks on your Amplifier/ Home theater. 2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 3 PC IN Connects to the video and audio output jacks on your PC. 7 COMPONENT IN 1,2 Connects Component video/audio.
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box. 1 POWER Turns the TV on and off. 2 NUMERIC BUTTONS Press to change the channel. 3– ) SOURCE Press to display all of the available video sources. a PRE-CH Tunes to the previous channel.
Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV. ANT 2 IN (CABLE) Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1. Find the cable that is connected to the ANT OUT terminal on your cable box.
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6-7). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or antenna from the back of the TV. ANT 1 IN ANT 2 IN (AIR) (CABLE) 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3.
Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR 1. Connect a Video Cable between the AV IN2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder. 2. Connect Audio Cables between the AV IN2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.
Connecting a DVD Player or Set-Top/Cable Box via HDMI This connection can only be made if there is an HDMI Output connector on the external device. 1. Connect an HDMI Cable between the HDMI IN (1,2 or 3) jack on the TV and the HDMI jack on the DVD player or Set- Top/Cable Box.
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. 1. Connect an Optical Cable between the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” terminal: Decrease the volume of the TV, and adjust the volume level with the system’s volume control.
Operation Turning the TV On and Off Press the POWER You can also use the button on the remote control. button on the front of the panel. Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: Menu language, Shop Mode, Channels and Time will be set. 1. Press the POWER button on the remote control. The message “Menu language, Shop Mode, Channels and Time will be set.” is displayed.
7. Press the ▲ or ▼ buttons to select “No” or “Yes”, then press the ENTER button. The message “Select the time zone in which you live.” is displayed. Plug & Play Set the daylight savings time. Daylight Savings Time 8. Press the ▲ or ▼ buttons to highlight the time zone for your local area Press the ENTER button. If you have received a digital signal, the time will be set automatically. If not, see page 48 to set the clock.
Adjusting the Volume 1. Press the VOL or VOL buttons to decrease or increase the volume. Using Mute At any time, you can cut off the sound using the MUTE button. 1. Press MUTE button and the sound cuts off. The word " " will appear in the lower-left corner of the screen. 2. To turn mute off, press the MUTE button again, or simply press the VOL or VOL buttons. Viewing the Display The display identifies the current channel and the status of certain audio-video settings. 1.
Viewing the Menus 1. With the power on, press the MENU button. The main menu appears on the screen. The menu’ s left side has five icons: Picture, Sound, Channel, Setup, Input. TV Input Source List : TV ► Edit Name ► WiSELINK ► Anynet+ (HDMI-CEC) 2. Use the ▲ or ▼ buttons to select one of the five icons. Then press the ENTER button to access the icon’s sub-menu. 3. Press the EXIT button to exit. Move Enter Exit The on-screen menus disappear from the screen after about one minute.
Storing Channels in Memory (Automatic Method) 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select “Channel”, then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On 2. Press the ▲ or ▼ buttons to select "Auto Program", then press the ENTER button. Move 3. Press the ▲ or ▼ buttons to select the antenna connection, then press the ENTER button.
Setting Up Your Remote Control After the television has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes. Setting Up the Remote to Operate Your VCR 1. Turn off your VCR. 2.
Setting Up the Remote to Operate Your DVD 1. Turn off your DVD. 2. Press the DVD button on your TV’s remote control. 3. Press the SET button on your TV’s remote control. 4. Using the number buttons on your remote control, enter three digits of the DVD code listed on page 20~21 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.) 5. Press the POWER button on the remote control.
Remote Control Codes VCR Brand SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MATHES DAEWOO DB DIMENSIA DYNATECH ELECTROHOME EMERSON FISHER FUNAI GENERAL ELECTRIC GO VIDEO HARMAN KARDON HITACHI INSTANT REPLAY JC PENNEY JCL JVC KENWOOD KLH KONIA LG(Goldstar) LIOYD LOGIK LXI MAGNAVOX MARANTZ MARTA MEI MEMOREX MGA MIDLAND MINOLTA MITSUBISHI Code 000 001 002 003 004 005 077 078 079 020 025 004 027 032 007 026 018 022 002 003 006 008 015 055 021 056 00
CABLE BOX Brand SAMSUNG GI HAMLIN HITACHI JERROLD MACOM MAGNAVOX OAK PANASONIC PHILIPS PIONEER RCA REGAL Code 000 001 041 003 024 025 030 038 039 025 030 019 023 026 003 022 019 021 004 018 014 022 003 002 003 004 005 006 007 031 028 027 037 044 023 028 020 044 040 Brand REGENCY SA SCIENTIFIC ATLAN SPRUCER STARGATE 2000 SYLVANIA TEXSCAN TOCOM UNIVERSAL VIEWSTAR WARNER AMEX ZENITH Code 015 023 042 043 042 043 022 036 016 016 032 033 034 019 021 023 028 046 017 029 035 037 045 SAMSUNG DVD Product DVD DV
DVD Brand PANASONIC PHILIPS ROTEL RIO RCA RAITE ROWA SAMPO SONY SHERWOOD SVA SYLVANIA SHARP SANSUI SANYO SHINSONIC Code 024 034 124 134 136 137 138 036 076 117 118 120 023 035 074 075 131 132 073 038 104 026 029 126 127 128 129 130 141 039 041 042 043 093 140 062 062 090 094 Brand THOMSON TOSHIBA TECHNICS TVIEW TOKAI TEAC TECHWOOD TREDEX URBAN CONCEPTS VENTURER VOCOPRO YAMAHA YAMAKAWA XWAVE ZENITH Code 145 028 062 076 139 072 073 096 097 098 099 101 076 075 102 032 063 040 073 103 076 121 SAMSUNG SET-TO
To Select the Source Use to select TV or other external input sources connected to the TV. Use to select the input source of your choice. TV Input Source List : TV ► Edit Name ► WISELINK Anynet+ (HDMI-CEC) 1. Press the MENU button to display the menu. Press the▲ or ▼ buttons to select “Input”, then press the ENTER button. 2. Press the ENTER button to select "Source List". Press the ▲ or ▼ buttons to select signal source, then press the ENTER button.
Picture Control Using Automatic Picture Settings Your TV has Three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory. You can activate either Dynamic, Standard, Movie by making a selection from the menu. 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. TV Picture Mode : Dynamic ► Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Balck light 100 ▼More Move 2.
Activating Backlight You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10) TV Picture Mode : Dynamic ► Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Balcklight 10 ▼More 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ▲ or ▼ button to select “Backlight”, then press the ENTER button. 3. Press the ◄ or ► button to decrease or increase the valueof the backlight brightness.
Adjusting the Detailed Settings You can set Detailed picture settings. Activating Detailed Settings TV 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ENTER button to select “Mode” Press the ▲ or ▼ button to select “Movie”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Detailed settings”, then press the ENTER button. Picture Mode is available in Standard or Movie mode.
Activating Gamma TV You can adjust the middle brightness of pictures. (-3 ~ 3) Detailed Settings Black Adjust Dynamic Contrast Gamma Color Space White Balance My Color Control Edge Enhancement XVYCC 8. Press the ▲ or ▼ button to select “Gamma”, then press the ENTER button. 9. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. Move : Off : Off :0 : Auto : Off : Off Enter Return 0 Gamma Adjust TV Changing the Color Space 10.
Activating My Color Control TV 15. Press the ENTER button to select “My Color Control”. 16. Press the ▲ or ▼ button to select “Pink”,“Green”,“Blue”,“White”,“Reset”. Press the ENTER button. 17. Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button. Move TV : Off : Off :0 : Auto : Off : Off Enter Return My Color Control Changing the adjustment value will refresh the adjusted screen.
Changing the Screen Size Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its TV Picture own set of screen sizes as well. ▲More Color Tone : Cool2 Detailed settings : 16 : 9 Size : Low Digital NR Active Color : On : On DNle : OK Reset 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. 2.
Setting the Active Color If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture. 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. TV Picture ▲More Color Tone : Cool2 Detailed settings : 16 : 9 Size : Low Digital NR Active Color : On : On DNle : OK Reset 2. Press the ▲ or ▼ button to select "Active Color", then press the ENTER button. 3.
Freezing the Picture 1. Press the STILL button to freeze a moving picture. Normal sound will still be heard. Press again to cancel. While V-Chip is in operation, the Still function cannot be used. Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. TV Setup ▲ More Film Mode 2.
Viewing Picture-in-Picture This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen, and a different one in the PIP screen. Please see ‘PIP Settings’below for detaileds. You can use the PIP feature to simultaneously watch two video sources. (See page 38 to select the PIP picture sound.) While V-Chip (See page 56) is in operation, the PIP function cannot be used.
Changing the Position of the PIP Window 4. Press the ▲ or ▼ buttons to select “Position”, then press the ENTER button. Press the ▲ or ▼ buttons to select the desired channel in the PIP window. TV Press the ENTER buttons. The Double ( Position mode.
Sound Control Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the "automatic" settings.) 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Sound", then press the ENTER button. TV Sound Mode : Custom Equalizer SRS TruSurround XT : Off Multi-Track Options Auto Volume : Off Internal Mute : Off : Main Sound Select Reset 2.
Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Press the MENU button to display the menu. TV Sound Mode : Custom ► Press the ▲ or ▼ buttons to select "Sound", then press the ENTER button.
Choosing a Multi-Channel Sound (MTS) track - Analog Multi-Track Sound 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Sound", then press the ENTER button. TV Multi-Track Options Preferred Language : English Multi-Track Sound : Stereo ► ► 2. Press the ▲ or ▼ buttons to select "“Multi-Track Options", then press the ENTER button. Enter 3. Press the ▲ or ▼ buttons to select “Multi-Track Sound”, then press the ENTER button.
Selecting the Internal Mute Sound output from the TV speakers is muted. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Sound", then press the ENTER button. TV Sound Mode : Custom Equalizer SRS TruSurround XT : On Multi-Track Options Auto Volume : Off Internal Mute : Off : Main Sound Select Reset 2. Press the ▲ or ▼ buttons to select "Internal Mute", then press the ENTER button. Move TV 3. Press the ▲ or ▼ buttons to select “On”, then press the ENTER button.
Listening to the Sound of the Sub (PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Sound", then press the ENTER button. TV Sound Mode : Custom Equalizer SRS TruSurround XT : On Multi-Track Options Auto Volume : Off Internal Mute : Off : Main Sound Select Reset 2. Press the ▲ or ▼ buttons to select "Sound Select”, then press the ENTER button.
Channel Control Selecting the Antenna 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Channel", then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Move 2. Press the ENTER button to select “Antenna”. Press the ▲ or ▼ buttons to select “Air” or “Cable”,then press the ENTER button. TV Press the ANTENNA button on the remote control.
Setting the Channel Lists You can add or delete a channel so only channels you want are displayed. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Channel", then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On 2. Press the ▲ or ▼ buttons to select "Channel List", then press the ENTER button. Move 3. Press the ENTER button to select “All”.
To Set-Up Your Favorite Channels You can set channels you watch frequently as favorites. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Channel", then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On 2. Press the ▲ or ▼ buttons to select "Channel List", then press the ENTER button . Move 3.
Using the Channel Lists Displays the channel list automatically when you press CH LIST button on the remote. (Choose All, Added, or Favorite) 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Channel", then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On 2. Press the ▲ or ▼ buttons to select "Channel List", then press the ENTER button. Move 3.
Labeling Channels Channels can be labeled so that their call letters appear whenever the channel is selected. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select “Channel”, then press the ENTER button. Press the ▲ or ▼ buttons to select “Name”, then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On Move 2.
Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Channel", then press the ENTER button. TV Channel Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength LNA : On 2. Press the ▲ or ▼ buttons to select "Fine Tune", then press the ENTER button. Move 3. Press the ◄ or ► buttons to adjust the fine tuning.
PC Display Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1.
Setting up the TV with your PC How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. This function does not work in DVI-Digital mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. Press the ▲ or ▼ buttons to select "PC", then press the ENTER button.
Changing the Screen Position 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. Press the ▲ or ▼ button to select "PC", then press the ENTER button. TV PC Image Lock ► Position ► Auto Adjustment ► Image Reset ► Change to the PC mode first. 2. Press the ▲ or ▼ button to select "Position", then press the ENTER button. 3. Press the ▲ or ▼ button to adjust the V-Position.
Time Setting Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. Press the ▲ or ▼ buttons to select "Time", then press the ENTER button.
Option 2: Setting the Clock Automatically 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. Press the ▲ or ▼ buttons to select "Time", then press the ENTER button. TV Setup Plug & Play ► Language : English ► Time ► Game Mode : Off ► 2. Press the ENTER button to select "Clock". V-Chip ► Caption ► Menu TransParency : High ► ▼More Move 3. Press the ENTER button to select “Clock Mode”.
Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. Press the ▲ or ▼ buttons to select "Time", then press the ENTER button. TV Time 1/ 1/ 2007/ 12 : 00 am Clock ► Quick way to access the sleep timer setting: Simply press the “SLEEP” button on the remote control.
Setting the On/Off Timer 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. Press the ▲ or ▼ buttons to select "Time", then press the ENTER button. TV Time 1/ 1/ 2007/ 12 : 00 am 2. Press the ▲ or ▼ buttons to select "Timer 1,Timer 2,Timer 3 ", then press the ENTER‑button. Clock ► Sleep Timer : Off ► Timer 1 Timer 2 : Inactivated ► : Inactivated ► Timer 3 : Inactivated ► Move 3.
Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off" 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. TV Setup ▲More 2. Press the ▲ or ▼ buttons to select "Blue Screen", then press the ENTER button.
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates when watching regular analog channels or when you have an analog external component (such as a VCR) connected. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select “Setup”, then press the ENTER button. TV Setup Plug & Play ► Language 2. Press the ▲ or ▼ buttons to select “Caption”, then press the ENTER button.
Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select “Setup”, then press the ENTER button. TV Caption 2. Press the ▲ or ▼ buttons to select “Caption”, then press the ENTER button. Caption 3. Press the ENTER button to select “Caption”. Press the ▲ or ▼ buttons to select “On”, then press the ENTER button. Caption Options Caption Mode Move 4.
Menu Transparency Level Adjusts the transparency of the menu screen. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. TV Setup Plug & Play ► Language 2. Press the ▲ or ▼ buttons to select “Menu Transparency”, then press the ENTER button. : English ► Time ► : Off ► Game Mode V-Chip ► Caption ► Menu TransParency : High ► ▼More Move 3.
Setting the Function Help Displays help on the menu functions. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. TV Setup ▲ More Film Mode 2. Press the ▲ or ▼ buttons to select “Function Help”, then press the ENTER button. 3. Press the ▲ or ▼ buttons to select “On”, then press the ENTER button. Press the EXIT button to exit.
Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. When the V-chip feature is activated, the PIP features do not function. Setting Up Your Personal ID Number (PIN) 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. TV Language 2.
How to Enable/Disable the V-Chip 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select "Setup", then press the ENTER button. TV Setup Plug & Play ► Language 2. Press the ▲ or ▼ buttons to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3. The “V-Chip” screen will appear. Press the ▲ or ▼ buttons to select “TV Parental Guidelines”, then press the ENTER button. TV V-Chip V-Chip Lock : On TV Parental Guidelines ► ► MPAA Rating ► Canadian English ► Canadian French Downloadable U.S. Rating ► ► Change PIN Move 4. The “TV Parental Guidelines” screen will appear. Press the ▲ or ▼ buttons to select one of the six aged based categories: • • • • • • TV ALL FV V S Move TV 5.
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select “Setup”, then press the ENTER button.
How to Set up Restrictions Using the ‘Canadian English’ 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select “Setup”, then press the ENTER button. TV Setup Plug & Play ► 2. Press the ▲ or ▼ buttons to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
How to Set up Restrictions Using the ‘Canadian French’ 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select “Setup”, then press the ENTER button. TV Setup Plug & Play ► 2. Press the ▲ or ▼ buttons to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select “Setup”, then press the ENTER button. TV Setup Plug & Play ► Language : English ► Time ► 2. Press the ▲ or ▼ buttons to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Setting the Light Effect (LN-T4065F / LN-T4665F / LN-T5265F) You can turn on/off the blue LED on the front of TV. TV Blue Screen • • • • : On ► Melody : Off ► PC ► Home Theater PC : Off ► 2. Press the ▲ or ▼ buttons to select “Light Effect”, then press the ENTER button. 3. Press the ▲ or ▼ button to select “Off”, “In Standby”, “In Watching TV” or “Always”, then press the ENTER button. Setup ▲More 1. Press the MENU button to display the menu.
WISELINK Using the WISELINK Function This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class (MSC) device. TV Side Panel Press the POWER button on the remote control or front Example panel. Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack (USB jack) on the side of the TV. If you enter the WISELINK mode with no USB device connected the message “There is no device connected” will appear.
Using the WISELINK Menu 1. Press the MENU button. Press the ▲ or ▼ buttons to select “Input”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER button. TV Input Source List : TV Edit Name WISELINK Anynet+ (HDMI-CEC) Move 3. Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press the ENTER button. The WISELINK menu differs depending on the USB Memory Device connected to TV.
Using the PHOTO (JPEG) List This menu shows JPEG files and folders saved on an USB memory device. 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. XTICK 861MB/994MB Free Move Enter Return 3. Press the ▲, ▼, ◄ and ► buttons to select a file, then press the ENTER button.
Selecting a Photo and Slide Show 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. XTICK 861MB/994MB Free Move 3. Press the INFO button to display “Slide Show” or “Cancel the Selected file”.
Using the Menu during a Slide Show Slide Show Speed: Select to control the slide show speed. Fast You can select Slow, Normal, or Fast. Background Music: Select to choose whether you want to play an MP3 file during a slide show. OFF You can select Music "ON" or "OFF". Background Music Setting: Background Music Setting While the slide show is in progress, MP3 files and folders under the same directory are displayed. Select a folder using the ▲ or ▼ buttons and press the ENTER button.
Slideshow function information icon (Displayed at the top left of the screen). Icon Play Current OSD Function (Photo) SlideShow Photo SlideShow is in progress. You are able to pause a SlideShow and Music by pressing the PLAY/PAUSE button on the remote control during a SlideShow. Pause Photo Pause To resume the SlideShow, press the PLAY/PAUSE button on the remote control again. Move to Next Photo Pressing the (right) direction button on the remote control allows you to move to the next photo.
Rotating 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. XTICK 861MB/994MB Free Move Enter Return 3. Press the ▲, ▼, ◄ and ► buttons to select a file, then press the ENTER button. Pressing the button over a photo thumbnail displays the photo in full screen.
Zooming-in 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. XTICK 861MB/994MB Free Move Enter Return 3. Press the ▲, ▼, ◄ and ► buttons to select a file, then press the ENTER button. Pressing the button over a photo thumbnail displays the photo in full screen.
Zoom function information icon (Displayed at the top left of the screen). Icon Current OSD Function x2 Zoom (x 2) Zoom-in to a photo x2. x4 Zoom (x 4) Zoom-in to a photo x4. x1 Zoom (x 1) Restore a photo to its original size. Pan Down Pan down to view the lower part of a zoomed-in photo. Pan Up Pan up to view the upper part of a zoomed-in photo. Pan Right Pan right to view the right side of a zoomed-in photo. Pan Left Pan left to view the left side of a zoomed-in photo.
Using the MP3 List This menu shows MP3 files from among the files saved on a USB memory device. 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a folder or file. Move 3. Press the ▲ or ▼ button to select a file, then press the ENTER button. Nat King Cole-Fly me to the moon To select all files or a file, press the INFO button to display the Music menus.
Music Repeat 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Music”, then press the ENTER button. The saved file information is displayed as a folder or file. XTICK 861MB/994MB Free Move 3. Press the ▲ or ▼ button to select a file, then press the ENTER button. Nat King Cole-Fly me to the moon To select all files or a file, press the INFO button to display the Music menus.
Using the Setup Menu Setup displays the user settings of the WISELINK menu. 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65) 2. Press the ◄ or ► button to move to “Setup”, then press the ENTER button. Move Enter Return Enter Return Enter Return 3. Press the ▲ or ▼ button to select a file, then press the ENTER button. Slide Show Speed : Fast Slide Show Repeat : Off Background Music On/Off : On Music Repeat : On Screen Saver : 5 min Move 4.
Slide Show Speed: Select to control the slide show speed. You can select Slow, Normal or Fast. Slide Show Speed Background Music : Fast Fast : Off Normal Background Music Setting Slow Music Repeat : On Screen Saver : Off Move Move Enter Enter Return Return Background Music : Select to determine whether to play an MP3 file during a slide show. You can select Music On or Music Off.
About Anynet+ What is Anynet+? Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with the TV's remote. Connecting Anynet+ Devices The Anynet+ system can be used only with Samsung AV devices that have the Anynet+ feature. To be sure your Samsung AV device has this feature, check if there is an Anynet+ mark on it. To directly connect to TV TV Anynet+ Device 1 HDMI 1.3 Cable HDMI 1.
Setting Up Anynet+ The following settings are to use Anynet+ functions. To use the Anynet+ Function, HDMI Control must be set to On 1. Press the Anynet+ button. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2. Press the ENTER button to select Anynet+ (HDMI-CEC), then press the ENTER button. Air28 Recevier: On Connect Recorder Setup 3, Press the ▲ or ▼ button to select On, then press the ENTER button. he Anynet+ (HDMI-CEC) function is enabled.
Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description Watch TV Switches from Anynet+ to TV broadcast mode. (Device_Name) Menu Shows the menu of the connected device. Example. When a DVD Recorder is connected, the DVD Recorder’s title menu appears. (Device_Name) Operation Shows the play control menu of the connected device. Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder appears.
Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. 1. Press the Anynet+ button. Press the ▲ or ▼ button to select Receiver, then press the ENTER button. 2. Press the ◄ or ► button to select to On, then press the ENTER button. Now you can listen to sound through the receiver. 3. Air28 Recevier: On Connect Recorder Setup Press the EXIT button to exit.
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor picture Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality. Try another channel. Adjust the antenna. No picture or sound. Try another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections.
Problem Possible Solution Horizontal bars appear to flicker, jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning. Vertical bars appear to flicker, jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning. Screen is black and power indicator light blinks steadily. On your computer check: Power, Signal Cable. The TV is using its power management system. Move the computer's mouse or press any key on the keyboard.
Installing the Stand <2> <3> 1. Place the TV face down on a soft cloth or cushion on a table. 2. Put the stand into the hole at the bottom of the TV. 3. Insert screw into the hole indicated and tighten. Disconnecting the Stand <2> <3> <4> 1. Place the TV face down on a soft cloth or cushion on a table. 2. Remove four screws from the back of the TV. 3. Separate the stand from the TV. 4. Cover the bottom hole with a cap. English - 83 BN68-01178A-Eng.
Wall-Mount Adjustment (Sold separately) Tras instalar el montaje en la pared, puede ajustar fácilmente la posición del televisor. TV Rear Panel Auto Wall-Mount EX-LINK Cable (Not supplied) Entering the menu TV 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”, then press the ENTER button. 3. Adjust to the desired position using the ▲,▼,◄,► buttons. 4.
Wall Mount Kit Specifications ( VESA ) When attaching to other building materials, please contact your nearest dealer. Product Family LCD-TV PDP-TV inch VESA Spec. (A * B) Standard Screw (C * D) Quantity 23~ 26 200 * 100 M4 * L10 4 32 ~ 40 200 * 200 M6 * L10 4 46 ~ 52 600 * 400 57 700 * 400 M8 * L15 4 42 ~ 50 600 * 400 63 No VESA M8 6 We provided the standard dimensions for wall mount kits as shown in the table above.
Using the Anti-Theft Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. Cable Figure 2 Figure 1 The place of the Kensington Lock may be different depending on its model. 1.
Specifications Model Name LN-T4061F LN-T4661F 40 inches 46 inches 245 W 265 W 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 10W X 2 10W X 2 38.2 X 3.4 X 24.7 inches (971 x 87.2 x 628 mm) 38.2 X 11.8 X 27 inches (971 x 300 x 687 mm) 43.5 X 4.1 X 27.8 inches (1106 x 104.2 x 706 mm) 43.5 X 12.8 X 30.2 inches (1106 x 326 x 768 mm mm) 46.52 lbs (21.1kg) 39.24 lbs (17.8 kg) 65.26 lbs (29.6kg) 53.35 lbs (24.
This page is intentionally left blank. BN68-01178A-Eng.
Contenido Información General ■ ■ ■ ■ ■ ■ Listado de características................................................................ 2 Accesorios....................................................................................... 2 Aspecto general del panel de control............................................... 3 Aspecto general del panel de conexiones....................................... 4 Mando a distancia............................................................................
Información General Listado de características Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor. emporizador automático para encender o apagar el televisor. T Temporizador de desconexión especial. Función V-chip. Excelente interfaz digital y capacidad de trabajo en red: El sintonizador digital HD incorporado permite ver las emisiones HD que no exigen una suscripción sin que sea necesario disponer de un receptor de televisión digital.
Aspecto general del panel de control Botones de la parte inferior derecha del panel Los botones del panel inferior derecho controlan las funciones básicas del televisor, incluido el menú en pantalla. Para usar las funciones más avanzadas, debe usar el mando a distancia. 1 2 3 4 76 5 1 2 3 4 6 5 5 7 El color y la forma del producto pueden variar según el modelo.
Aspecto general del panel de conexiones Conectores del panel posterior Se pueden usar para conectar componentes de A/V que estarán conectados permanentemente, como reproductores de vídeo o de DVD. Si precisa información sobre la conexión de equipos, consulte las páginas 6 a 11. [Tomas del panel lateral] 1 AUDIO OUT Permite conectar las tomas de la entrada de audio del amplificador/sistema de Home Cinema. 2 DIGITAL AUDIO OUT (OPTICAL) Se conecta al componente de audio digital.
Mando a distancia Puede usar el mando a distancia desde una distancia máxima de alrededor de 7 metros desde el TV. Cuando utilice el mando a distancia, señalé siempre directamente hacia el TV. También puede utilizar el mando a distancia para hacer funcionar el aparato de vídeo, el decodificador, el reproductor de DVD o el receptor de TV digital. 1 POWER Enciende o apaga el TV. 2 NUMERIC BUTTONS Pulsar para cambiar el canal..
Instalación de las pilas en el mando a distancia 1. Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración. 2. Coloque dos pilas de tamaño AAA. Compruebe que los extremos “+” y “-” de las pilas concuerdan con el diagrama del interior del compartimiento. 3. Vuelva a colocar la tapa. Si no va a usar el mando a distancia durante un largo período de tiempo, extraiga las pilas y guárdelas en un lugar fresco y seco.
Conexión de TV por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. TV por cable sin decodificador 1. onecte el cable de entrada en el terminal de la antena ANT 2 IN (CABLE) de la parte C posterior del TV. ANT 2 IN (CABLE) ado que el TV está preparado para la televisión por cable, no se necesita un decodificador para ver D canales de cable no codificados. Conexión al decodificador que decodifica todos los canales 1.
Conexión de un reproductor de vídeo Conexión de vídeo Estas instrucciones presuponen que ya ha conectado el TV a una antena o sistema de TV por cable (siguiendo las instrucciones de las páginas 6 a 7). Si aún no ha conectado el TV a una antena o un sistema de cable, sáltese el paso 1. 1. D esconecte el cable o la antena de la parte posterior del TV. ANT 1 IN ANT 2 IN (AIR) (CABLE) onecte el cable o la antena 2. C en el terminal ANT IN de la parte posterior del reproductor de vídeo. 3.
Conexión de una videocámara Las tomas del panel lateral del televisor facilitan la conexión de la videocámara. Permiten ver las cintas de la videocámara sin utilizar un aparato de vídeo. 1. C onecte un cable de audio entre las tomas AV IN 2 [VIDEO] (o S-VIDEO) del televisor y las tomas AUDIO OUT (Salida de audio) de la videocámara. 2. Conecte un cable de audio entre las tomas AV IN 2 [R-AUDIO-L] del televisor y las tomas AUDIO OUT (Salida de audio) de la videocámara.
Conexión a un DVD/receptor de TV digital a través de un HDMI Solo es aplicable si hay un conector de salida de HDMI en el dispositivo externo. Panel posterior del 1. Conecte un cable de HDMI reproductor de DVD entre el conector de HDMI IN (1,2 o 3) del televisor y el conector HDMI del reproductor de DVD/ reproductor de televisión digital.
Conexión de un sistema de audio digital Las tomas del panel posterior del televisor facilitan la conexión de un sistema de audio digital al televisor. 1. Conecte un cable óptico entre las tomas DIGITAL AUDIO OUT (OPTICAL) Salida de audio digital, óptica) del televisor y las tomas Digital Audio Input Entrada de audio digital) del sistema de audio digital.
Funcionamiento Encendido o apagado del TV Pulse el botón POWER del mando a distancia. También puede usar el botón button on the front of the panel. Función Plug & Play Cuando se enciende el televisor por primera vez, se configuran seguidos y automáticamente dos ajustes básicos del usuario. 1. Pulse el botón POWER en el mando a distancia. Aparece el mensaje ““Menu language, Shop Mode, Channels and Time will be set”. Pulse el botón ENTER y aparecerá automáticamente el menú “Select the language of the OSD”.
7. Pulse los botones ▲ o ▼ para seleccionar “Sí” o “No” después, pulse el botón ENTER. Se muestra el mensaje “Seleccione la zona horaria en la que se encuentra.” . Plug & Play Seleccionar si no observa el horario de verano. Ajuste - Hora de Verano 8. ulse los botones ▲ o ▼ para resaltar la zona horaria del área local. P Pulse el botón ENTER. Si ha recibido una señal digital, se ajustará la hora automáticamente. En caso negativo, consulte la página 48 para ajustar el reloj.
Ajuste del volumen 1. Pulse los botones VOL o VOL para subir o bajar el volumen. Mediante Silencio Puede interrumpir el sonido en cualquier momento pulsando el botón MUTE. 1. P ulse el botón MUTE y el sonido se desconectará. En la esquina inferior izquierda de la pantalla aparecerá la palabra “ ”. 2. P ara recuperar el sonido vuelva a pulsar MUTE o, simplemente, pulse los botones VOL o VOL .
Visualización de los menús 1. on el aparato encendido, pulse el botón MENU. C En la pantalla aparece el menú principal. En el lado izquierdo del menú hay cinco iconos: 2. Pulse los botones ▲ o ▼ para seleccionar uno de los cinco iconos. A continuación, pulse ENTER para acceder al submenú del icono. 3. Pulse el botón EXIT para salir.
Almacenamiento de los canales en la memoria (método automático) 1. ulse el botón MENU para visualizar el menú. P Pulse los botones ▲ o ▼ para seleccionar “Canal” y, después, pulse el botón ENTER. TV Canal Antena :Aire ► Prog. Auto ► ► Borrar canal encriptado Lista de canales 2. Pulse los botones ▲ o ▼ para seleccionar “Prog. Auto” y, después, pulse el botón ENTER. ► Nombre ► Sintonia Fina ► ► Intensidad señal LNA : Apag Mover Moverrr 3.
Setting up your remote Control Una vez configurado correctamente, el mando a distancia puede funcionar en cinco modos diferentes: TV, DVD, Cable (Decodificador), Set- Top Box (receptor TV digital), o VCR (vídeo). Pulsando el botón correspondiente del mando a distancia podrá cambiar de un modo a otro y controlar cualquiera de estos equipos. El mando a distancia quizá no sea compatible con todos los reproductores de DVD, vídeos, decodificadores y receptores de TV digital.
Configuración del mando a distancia para controlar el DVD 1. Apague el DVD. 2. Pulse el botón DVD del mando a distancia del televisor. 3. Pulse el botón SET del mando a distancia del televisor. 4. Mediante los botones numericos del mando a distancia, introduzca los tres dígitos del código del DVD correspondientes a la marca de su DVD, que aparece en la lista de la página 20~21 de este manual. Asegúrese de introducir los tres dígitos del código, incluso aunque el primer dígito sea un “0.
Códigos del mando a distancia Códigos de vídeo Marca SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MATHES DAEWOO DB DIMENSIA DYNATECH ELECTROHOME EMERSON FISHER FUNAI GENERAL ELECTRIC GO VIDEO HARMAN KARDON HITACHI INSTANT REPLAY JC PENNEY JCL JVC KENWOOD KLH KONIA LG(Goldstar) LIOYD LOGIK LXI MAGNAVOX MARANTZ MARTA MEI MEMOREX MGA MIDLAND MINOLTA MITSUBISHI Codigo 000 001 002 003 004 005 077 078 079 020 025 004 027 032 007 026 018 022 002 003 00
Códigos de cable Marca SAMSUNG GI HAMLIN HITACHI JERROLD MACOM MAGNAVOX OAK PANASONIC PHILIPS PIONEER RCA REGAL Codigo 000 001 041 003 024 025 030 038 039 025 030 019 023 026 003 022 019 021 004 018 014 022 003 Marca REGENCY SA SCIENTIFIC ATLAN SPRUCER STARGATE 2000 SYLVANIA TEXSCAN TOCOM UNIVERSAL VIEWSTAR WARNER AMEX ZENITH 002 003 004 005 006 007 031 028 027 037 044 023 028 020 044 040 Codigo 015 023 042 043 042 043 022 036 016 016 032 033 034 019 021 023 028 046 017 029 035 037 045 SAMSUNG Códigos
Códigos de DVD Marca PANASONIC PHILIPS ROTEL RIO RCA RAITE ROWA SAMPO SONY SHERWOOD SVA SYLVANIA SHARP SANSUI SANYO SHINSONIC Codigo 024 034 124 134 136 137 138 036 076 117 118 120 023 035 074 075 131 132 073 038 104 026 029 126 127 128 129 130 141 039 041 042 043 093 140 062 062 090 094 Marca THOMSON TOSHIBA TECHNICS TVIEW TOKAI TEAC TECHWOOD TREDEX URBAN CONCEPTS VENTURER VOCOPRO YAMAHA YAMAKAWA XWAVE ZENITH Codigo 145 028 062 076 139 072 073 096 097 098 099 101 076 075 102 032 063 040 073 103 076 121
Para seleccionar la fuente Siga este procedimiento para seleccionar el televisor u otra fuente externa de entrada conectada al televisor. Se usa para seleccionar la pantalla deseada. 1. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ buttons to select “Entrada”, then press the ENTER button. 2. Pulse el botón ENTER para seleccionar “Lista de Origen”. Pulse los botones ▲ o ▼ para seleccionar la fuente de la señal, después pulse el botón ENTER.
Control de la Imagen Uso de los parámetros de imagen automáticos El TV tiene cuatro valores de imagen automáticos (“Dinámico”, “Normal”, “Cine”, y “Favorito”) predeterminados de fábrica. Puede activar el ajuste Dinámico, Normal o Película seleccionándolo en el menú. TV 1. Pulse el botón MENU para ver el menú en pantalla. Pulse el botón ENTER para seleccionar “Imagen”. Imagen Modo : Dinámico ► Contraste 100 Luminosidad 50 Definición 85 Color 55 Tinte V 50 R 50 Luz de fondo 10 ▼Más Mover 2.
Activación de Ajuste del negro Puede ajustar el brillo de la pantalla mediante el ajuste del brillo de la luz de fondo del LCD. (0~10) 1. ulse el botón MENU para ver el menú en pantalla. P Pulse el botón ENTER para seleccionar “Imagen”. TV 2. Pulse los botones ▲ o ▼ para seleccionar “Luz de fondo” y, después, pulse el botón ENTER. 3. Pulse los botones ◄ o ► para reducir o aumentar el valor de un elemento concreto. Pulse el botón ENTER. Pulse el botón EXIT para salir.
Activación de la configuración detallada Puede realizar una configuración detallada de los valores de la imagen. Activación de la configuración detallada TV 1. ulse el botón MENU para ver el menú. P Pulse el botón ENTER para seleccionar “Imagen”.. 2. ulse el botón ENTER para seleccionar “Modo”. P Pulse los botones ▲ o ▼ para seleccionar “Cine” y, a continuación, pulse el botón ENTER. 3. ulse los botones ▲ o ▼ para seleccionar “Configuración detallada” y pulse el P botón ENTER.
Activación de Gamma Se puede ajustar el brillo medio de las imágenes. (-3 ~ 3) 8. Pulse los botones ▲ o ▼ para seleccionar “Gamma” y pulse el botón ENTER. 9. ulse los botones ◄ o ► para reducir o aumentar el valor de un elemento P concreto. Pulse el botón ENTER.
Activación de Mi Ctrl de Color Este valor puede ajustarse para que se adapte a sus preferencias personales. Cuando se ejecuta la función Mi Ctrl de Color se captura la imagen actual como una imagen fija antes de mostrarla en la pantalla. TV 15. Pulse el botón ENTER para seleccionar “Mi Ctrl de Color”. 16. P ulse los botones ▲ o ▼ para seleccionar “Rosa”, “Verde”, “Azul”, “Blanco”,“Reiniciar”. Pulse el botón ENTER. 17. P ulse los botones ◄ o ► para reducir o aumentar el valor de un elemento concreto.
Cambio del tamaño de la pantalla La selección del tamaño de la pantalla depende del tipo de entrada de vídeo. 1. Pulse el botón MENU para ver el menú en pantalla. Pulse el botón ENTER para seleccionar “Imagen”. TV Imagen ▲Más Tono Color : Frío2 Configuración detallada : 16 : 9 Tamaño : Bajo Digital NR Color activo : Encendido : Encendido DNle : Aceptar Reiniciar ulse los botones ▲ o ▼ para seleccionar “Tamaño” y, después, pulse el botón 2. P ENTER.
Configuración de Color activo Si activa esta opción, los colores del cielo y del césped se ven más sólidos y claros y la imagen de la pantalla aparece más vívida. 1. Pulse el botón MENU para ver el menú. Pulse el botón ENTER para seleccionar “Imagen”. TV Imagen ▲Más Tono Color : Frío2 Configuración detallada : 16 : 9 Tamaño : Bajo Digital NR Color activo : Encendido : Encendido DNle : Aceptar Reiniciar 2.
Congelación de la imagen 1. Pulse el botón STILL para congelar una imagen en movimiento. El sonido normal se oirá todavía. Pulse de nuevo el botón para cancelar. Cuando V-Chip está funcionando, no se puede utilizar la función de imagen fija. Ajuste de la función Film Mode Puede automáticamente detectar y procesar las señales de las películas procedentes de todas las fuentes y ajustar la imagen para conseguir una calidad óptima. 1. P ulse el botón MENU para ver el menú en pantalla.
Visualización Imagen en imagen Este producto lleva un sintonizador incorporado. Por ejemplo, no es posible mirar un canal de televisión en la pantalla principal y otro en la pantalla PIP. Para mirar dos fuentes simultáneamente, puede utilizar la función PIP. (Vea la pagina 38 para seleccionar el sonido de la imagen PIP.) Mientras la opción V-chip activada (Consulte la página 56), la función de PIP no se puede usar.
Cambio de la posición de la ventana PIP 4. ulse los botones ▲ o ▼ para seleccionar “Posición” y, después, pulse el botón P ENTER. Pulse los botones ▲ o ▼ para seleccionar la posición de la ventana PIP deseada. TV Pulse el botón ENTER. Los modos Doble ( Posición.
Control de Sonido Personalización del sonido Es posible ajustar los parámetros del sonido según sus preferencias personales. (También puede utilizar alguno de los ajustes “automáticos”. ) 1. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Sonido” y, después, pulse el botón ENTER. 2. ulse los botones ▲ o ▼ para seleccionar “Ecualizador” y, después, pulse el botón P ENTER. TV Sonido Modo : Favorito Ecualizador Trusurround SRS XT : Apag Opc.
Configuración del TruSurround XT (SRS TS XT) TruSurround XT es una tecnología SRS patentada que solventa el problema de reproducir contenido multicanal 5.1 en dos altavoces. Trusurround proporciona una experiencia de sonido virtual convincente a través de cualquier sistema de reproducción con dos altavoces. Es totalmente compatible con todos los formatos multicanal. TV Sonido 1. Pulse el botón MENU para ver el menú en pantalla.
Selección de una pista de sonido multicanal (MTS) - Analogo Sonido multi-track 1. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Sonido” y, después, pulse el botón ENTER. 2. ulse los botones ▲ o ▼ para seleccionar “Opc. Multi-track” y, después, pulse el P botón ENTER. 3. ulse los botones ▲ o ▼ para seleccionar “Sonido Multi-track” y, después, pulse P el botón ENTER. TV Opc. Multi-track Opc.
Selección del silencio interno Se silencia la salida de sonido desde los altavoces del televisor. 1. Pulse el botón MENU para ver el menú en pantalla. Pulse los botones ▲ o ▼ para seleccionar “Sonido” y, después, pulse el botón ENTER. 2. TV Sonido Modo : Favorito Ecualizador Trusurround SRS XT : Apag Opc. Multi-track Vol.Auto : Apag Silenc. Int : Apag : Principal Sel. Sonido Reinicio del sonido ulse los botones ▲ o ▼ para seleccionar “Silenc. Int” y, después, pulse el botón P ENTER. Mover 3.
Escuchar el sonido de la sub imagen del PIP Cuando la opción PIP esta activada, usted puede escuchar el sonido de la sub imagen del PIP. 1. Pulse el botón MENU para ver el menú en pantalla. TV Pulse los botones ▲ o ▼ para seleccionar “Sonido” y, después, pulse el botón ENTER. 2. ulse los botones ▲ o ▼ para seleccionar “Sel. Sonido” y, después, pulse el P botón ENTER. 3. ulse los botones ▲ o ▼ para seleccionar “Principal” o “Sub” y, después, pulse el P botón ENTER.
Control de los Canales Selección de la antena 1. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Canal” y, después, pulse el botón ENTER. TV Canal Antena :Aire ► Prog. Auto ► Borrar canal encriptado ► ► Lista de canales Nombre Sintonia Fina ► ► Intensidad señal 2. ulse el botón ENTER para seleccionar “Antena”. P Pulse los botones ▲ o ▼ para seleccionar “Aire” o “Cable” y, después, pulse el botón ENTER.
Configuración de las listas de canales Puede agregar o suprimir un canal para que se muestren sólo los canales que desee. 1. 2. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Canal” y, después, pulse el botón ENTER. TV Canal Antena ulse los botones ▲ o ▼ para seleccionar “Lista de canales” y, después, P pulse el botón ENTER. :Aire ► Prog.
Para configurar los canales favoritos Puede configurar como favoritos los canales que vea con más frecuencia. 1. Pulse el botón MENU para ver el menú en pantalla. Pulse los botones ▲ o ▼ para seleccionar “Canal” y, después, pulse el botón ENTER. TV Canal Antena :Aire ► Prog. Auto 2. Pulse los botones ▲ o ▼ para seleccionar “Lista de canales” y, después, pulse el botón ENTER. ► ► Borrar canal encriptado Lista de canales ► ► Nombre Sintonia Fina ► LNA ► : Apag Mover 3.
Manejo de la Lista de Canales Muestra la lista de canales automaticamente cuando pulse CH LIST del mando a distancia. (Seleccione entre “Todos”, “Agregados” o “Favoritos”) 1. 2. TV ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Canal” y, después, pulse el botón ENTER. Canal Antena ulse los botones ▲ o ▼ para seleccionar “Lista de canales” y, después, pulse P el botón ENTER. :Aire ► Prog.
Etiquetado de canales Los canales se pueden etiquetar con el propósito de que cuando éstos se seleccionan se pueda ver su nombre. 1. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Canal” y, después, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar “Nombre” y, después, pulse el botón ENTER. TV Canal Antena :Aire ► Borrar canal encriptado ► ► ► Lista de canales Nombre Sintonia Fina Intensidad señal LNA : Apag 2.
Sintonización fina de los canales analógicos Utilice la sintonización fina para ajustar manualmente un determinado canal a fin de que la recepción sea óptima. 1. 2. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Canal” y, después, pulse el botón ENTER. TV Canal Antena ulse los botones ▲ o ▼ para seleccionar “Sintonia Fina” y, después, pulse el P botón ENTER. :Aire ► Borrar canal encriptado ► ► Lista de canales Nombre 4.
Pantalla de PC Uso del TV como pantalla de ordenador (PC) Instalación del software en el equipo (según Windows XP) A continuación se muestra una pantalla de configuración normal en un ordenador con Windows. No obstante, las pantallas reales en su PC probablemente serán diferentes, en función de su versión concreta de Windows y de su tarjeta de vídeo. Pero aunque las pantallas reales tengan un aspecto diferente, se aplicarán los mismos ajustes básicos e información en la mayoría de los casos.
Ajuste del televisor con el ordenador Cómo realizar el Ajuste automático Utilice la función de Ajuste automático para que el aparato de TV ajuste automáticamente las señales de vídeo que el monitor recibe. La función también ajusta automáticamente con más configuración y ajusta los valores y las posiciones de la frecuencia. Esta función no está disponible en el modo DVI-Digital. 1. ulse el botón MENU para ver el menú en pantalla.
Cambio de la posición de la pantalla ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar “PC” y, después, pulse el botón ENTER. 3. PC Fijar la Imagen ► Posición ► Ajuste Auto ► Reiniciar Imagen ► En primer lugar, cambie al modo PC. 2. TV ulse los botones ▲ o ▼ para seleccionar “Posición” y, después, pulse el botón P ENTER.
Ajuste de la Hora Configuración del Reloj Establecer el reloj es necesario para usar las distintas características de temporizador del TV. Además, puede comprobar la hora mientras está viendo el TV. (Simplemente pulse INFO). Opción 1: Ajuste manual del reloj 1. P ulse el botón MENU para ver el menú en pantalla. Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar “Tiempo” y, después, pulse el botón ENTER.
Opción 2: Ajuste automático del reloj 1. P ulse el botón MENU para ver el menú en pantalla. Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar “Tiempo” y, después, pulse el botón ENTER. TV Configuración Plug & Play ► Idioma : Español ► Tiempo ► Modo Juego : Apag ► V-Chip ► Subtítulo ► 2. Pulse el botón ENTER para seleccionar “Reloj”. Transpar. Del menú : Alto ► ▼Más Mover 3.
Configuración del Temporizador de sueño El temporizador de desconexión apaga automáticamente el televisor después de un período prefijado (entre 30 y 180 minutos). 1. 2. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar “Tiempo” y, después, pulse el botón ENTER.
Activación y desactivación del temporizador 1. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar “Tiempo” y, después, pulse el botón ENTER. TV Tiempo 1/ 1/ 2007/ 12 : 30 am Reloj ► 2. Pulse los botones ▲ o ▼ para seleccionar “Temporizador 1, Temporizador 2, Temporizador 3” y, después, pulse el botón ENTER.
Ajuste del modo Pantalla Azul Si no se recibe ninguna señal o ésta es muy débil, una pantalla azul sustituye de forma automática la imagen con interferencias. Si desea continuar viendo la imagen deficiente, debe definir el modo “Pantalla Azul” en “Apag.”. 1. 2. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER.
Visión de subtítulos (mensajes de texto en pantalla) - Analógico La función subtítulo analógico funciona en un modo de canal RF analógico o en modo de señal externa. 1. 2. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. TV Configuración Plug & Play ► Idioma ulse los botones ▲ o ▼ para seleccionar “Subtítulo” y, después, pulse el botón P ENTER.
Visión de subtítulos (mensajes de texto en pantalla) - Digital La función Subtítulo digital funciona en canales digitales. 1. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. 2. ulse los botones ▲ o ▼ para seleccionar “Subtítulo” y, después, pulse el botón P ENTER. 3. ulse el botón ENTER para seleccionar “Subtítulo”. P Pulse los botones ▲ o ▼ para seleccionar “Enc.” y, después, pulse el botón ENTER. 4.
Nivel Transparencia del menú Ajusta la transparencia de la pantalla del menú. 1. 2. ulse el botón MENU para ver el menú en pantalla. P Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. TV Configuración Plug & Play ► Idioma : Español ► Tiempo ► ulse los botones ▲ o ▼ para seleccionar “Transpar. Del menú” y, después, pulse P el botón ENTER. Modo Juego : Apag ► V-Chip ► Subtítulo ► Transpar. Del menú : Alto ► ▼Más Mover 3.
Ajuste de la función de ayuda Muestra la ayuda sobre las funciones del menú. 1. P ulse el botón MENU para ver el menú en pantalla. Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. TV Modo película Pulse el botón EXIT para salir. : Apag ► Ajuste de montaje en pared ► PIP ► 2. P ulse los botones ▲ o ▼ para seleccionar “Función de Ayuda” y, después, pulse el botón ENTER. 3. P ulse los botones ▲ o ▼ para seleccionar “Enc.
Uso de V-Chip La función V-Chip bloquea automáticamente la programación que se considera inadecuada para los niños. El usuario debe introducir primero un código PIN (número de identificación personal) antes de establecer o cambiar las restricciones de V-Chip. Si se ha activado la función V-chip, las opciones de PIP no funcionan. Ajuste del número de identificación personal (código PIN) 1. P ulse el botón MENU para ver el menú en pantalla.
Cómo activar/desactivar V-Chip 1. P ulse el botón MENU para ver el menú en pantalla. Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. TV Configuración Plug & Play ► Idioma : Español ► Tiempo ► Modo Juego : Apag ► V-Chip ► 2. P ulse los botones ▲ o ▼ para seleccionar “V-Chip” y, después, pulse el botón ENTER. Aparecerá el mensaje “Ingresar Código”. Escriba su código PIN de 4 dígitos. Subtítulo ► Transpar.
3. A parecerá la pantalla “V-Chip”. Pulse los botones ▲ o ▼ para seleccionar “Guías pater. TV” y, después, pulse el botón ENTER. TV V-Chip Bloqueo V-Chip : Apag ► ► Inglés Canadiense Francés Canadiense ► ► Clasificación U.S. Descargable ► ► Cambiar Código Mover 4. A parecerá la pantalla “Guías pater. TV”.
Configuración de las restricciones mediante las clasificaciones MPAA: G, PG, PG-13, R, NC-17, X, NR El sistema de clasificación MPAA utiliza el sistema de la MPAA (Motion Picture Association of America, Asociación americana de cinematografía) que se aplica principalmente en las películas. Si el bloqueo de V-Chip está activado, el televisor bloqueará automáticamente programas que estén codificados con clasificaciones rechazables (de la MPAA o de televisión). 1.
Cómo configurar las restricciones en el idioma “Inglés Canadiense” 1. P ulse el botón MENU para ver el menú en pantalla. Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. TV Configuración Plug & Play ► Idioma : Español ► Tiempo ► Modo Juego : Apag ► V-Chip ► 2. P ulse los botones ▲ o ▼ para seleccionar “V-Chip” y, después, pulse el botón ENTER. Aparecerá el mensaje “Ingresar Código”. Escriba su código PIN de 4 dígitos.
Cómo configurar las restricciones en el idioma ‘Francés Canadiense’ 1. P ulse el botón MENU para ver el menú en pantalla. Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. TV Configuración Plug & Play ► Idioma : Español ► Tiempo ► Modo Juego : Apag ► 2. P ulse los botones ▲ o ▼ para seleccionar “V-Chip” y, después, pulse el botón ENTER. Aparecerá el mensaje “Ingresar Código”. Escriba su código PIN de 4 dígitos.
Uso de V-Chip (V-Chip) con los canales digitales La información de la restricción de bloqueo se puede usar mientras se ven los canales DTV (DTV). 1. P ulse el botón MENU para ver el menú en pantalla. Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, después, pulse el botón ENTER. TV Configuración Plug & Play ► Idioma : Español ► Tiempo ► Modo Juego : Apag ► V-Chip ► ► Subtítulo 2. P ulse los botones ▲ o ▼ para seleccionar “V-Chip” y, después, pulse el botón ENTER.
Configuración de Efecto de luz (LN-T4065F / LN-T4665F / LN-T5265F) Se puede apagar o encender el LED azul del frontal del televisor. 1. Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar “Configuración” y después pulse el botón ENTER. TV 2. P ulse los botones ▲ o ▼ para seleccionar “Efecto de luz” y, a continuación, pulse el botón ENTER. Apagado: El LED no se activará. En m. espera: Enciende el LED en modo de espera. Viendo la TV: Enciende el LED cuando se mira la TV.
WISELINK Uso de la función WISELINK Esta función permite ver archivos de fotos (JPEG) y escuchar archivos de audio (MP3) guardados en un dispositivo de clase de almacenamiento masivo (MSC) USB. Panel lateral del TV Pulse el POWER botón de encendido del mando a distancia o del panel frontal. En primer lugar, conecte un dispositivo USB que contenga archivos JPEG o MP3 a la toma WISELINK (conector USB) que se encuentra en el lateral del televisor.
Uso del menú WISELINK 1. Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar “Input” y pulse el botón ENTER. 2. Pulse los botones ▲ o ▼ para seleccionar “WISELINK” y pulse el botón ENTER. TV Entrada Lista de Origen : TV Editar Nombre WISELINK Anynet+ Mover 3. Pulse los botones ▲ o ▼ para seleccionar el dispositivo de memoria MSC correspondiente y pulse el botón ENTER. El menú WISELINK puede variar según el dispositivo de memoria USB conectado al televisor.
Uso de la lista FOTO (JPEG) Este menú muestra carpetas y archivos JPEG guardados en un dispositivo de memoria MSC. 1. C omplete Steps 1 to 3 of “Uso del menú WISELINK”. (Consulte la página 65) XTICK 861MB/994MB Free 2. P ulse los botones ◄ o ► para desplazarse a “Photo” y pulse el botón ENTER. La información del archivo guardado se muestra como una carpeta o un archivo. Mover Ingresar Regresar 3. P ulse los botones ▲, ▼, ◄ y ► para seleccionar un archivo y pulse el botón ENTER.
Selección de una foto y un visionado automático 1. Complete Steps 1 to 3 of “Uso del menú WISELINK”. (Consulte la página 65) 2. P ulse los botones ◄ o ► para desplazarse a “Photo” y pulse el botón ENTER. La información del archivo guardado se muestra como una carpeta o un archivo. XTICK 861MB/994MB Free Mover 3. Regresar Pulse el botón INFO para visualizar “Secuencia” o “Cancela archivos selecc.”. Secuencia Cancela archivos selecc. INFO 4.
Uso del menú durante el visionado automático Velocidad de secuencia: Rápida Permite seleccionar la velocidad de presentación del visionado automático. Puede seleccionar Lenta, Normal o Rápida. Música de fondo: Permite reproducir un archivo MP3 durante el visionado automático. Apag Puede elegir que Music (Música) esté “Enc.” o en “Apag.” Config. música fondo: La información del archivo guardado se muestra como una carpeta o un archivo MP3. Config. música fondo Seleccionar archivos para música de fondo.
Icono de información de la función Visionado automático (Aparece en la parte superior izquierda de la pantalla). Icono OSD actual Función (Foto) Secuencia Visionado automático de fotos en curso. Foto Pausa Se puede hacer una pausa en la presentación y en la reproducción de música pulsando el botón PLAY/PAUSE del mando a distancia durante la presentación. Para reanudar el visionado automático, pulse de nuevo el botón PLAY/PAUSE del distancia.
Giro 1. C omplete Steps 1 to 3 of “Uso del menú WISELINK”. (Consulte la página 65) XTICK 861MB/994MB Free 2. P ulse los botones ◄ o ► para desplazarse a “Photo” y pulse el botón ENTER. La información del archivo guardado se muestra como una carpeta o un archivo. Mover 3. ulse los botones ▲, ▼, ◄ y ► para seleccionar un archivo y pulse el botón P ENTER. Si se pulsa el botón sobre la miniatura de una foto, ésta se muestra en pantalla completa.
Ampliación de imagen 1. C ompleta los pasos 1 al 3 de “Uso del menú WISELINK”. (Consulte la página 65) XTICK 861MB/994MB Free 2. P ulse los botones ◄ o ► para desplazarse a “Photo” y pulse el botón ENTER. La información del archivo guardado se muestra como una carpeta o un archivo. Mover 3. 4. ulse los botones ▲, ▼, ◄ y ► para seleccionar un archivo y pulse el botón P ENTER. Si se pulsa el botón sobre la miniatura de una foto, ésta se muestra en pantalla completa.
Icono de información de la función Zoom (Aparece en la parte superior izquierda de la pantalla). Icono OSD actual Función x2 Zoom (x 2) Aumenta dos veces la foto. x4 Zoom (x 4) Aumenta cuatro veces la foto. x1 Zoom (x 1) Restablece una foto a su tamaño original. Panorámica abajo Desplaza el encuadre hacia abajo para ver la parte inferior de una foto ampliada. Panorámica arriba Desplaza el encuadre hacia arriba para ver la parte superior de una foto ampliada.
Uso de la lista MP3 El menú muestra los archivos MP3 que se encuentran entre los achivos guardados en un dispositivo de memoria MSC. 1. C ompleta los pasos 1 al 3 de “Uso del menú WISELINK”. (Consulte la página 65) 2. P ulse los botones ◄ o ► para desplazarse a “Music” y pulse el botón ENTER. La información del archivo guardado se muestra como una carpeta o un archivo. XTICK 861MB/994MB Free Mover 3. Pulse los botones ▲ o ▼ para seleccionar un archivo y pulse el botón ENTER button.
Repetición de música 1. C ompleta los pasos 1 al 3 de “Uso del menú WISELINK” (Consulte la página 65). XTICK 861MB/994MB Free 2. P ulse los botones ◄ o ► para desplazarse a “Música” y pulse el botón ENTER. La información del archivo guardado se muestra como una carpeta o un archivo. Mover 3. Pulse los botones ▲ o ▼ para seleccionar un archivo y pulse el botón ENTER.
Uso del menú de configuración Configuración muestra al usuario la configuración del menú WISELINK. 1. C ompleta los pasos 1 al 3 de “Uso del menú WISELINK”. (Consulte la página 68) 2. P ulse los botones ◄ o ► para desplazarse a “Setup” y, a continuación, pulse el botón ENTER. XTICK 861MB/994MB Free Mover 3. Ingresar Regresar Pulse los botones ▲ o ▼ para seleccionar un archivo y pulse el botón ENTER. Velocidad de secuencia : Rápida Música de fondo : Apag. Config.
Velocidad de secuencia: Permite seleccionar la velocidad de presentación del visionado automático. Puede seleccionar Lenta, Normal o Rápida. Velocidad de secuencia Música de fondo : Fast Rápida : Off Normal Config. música fondo Lenta Repetir Música : Enc. Salvapantallas : 5 min. Mover Ingresar Regresar Música de fondo: Se selecciona para determinar si se desea reproducir un archivo MP3 durante el visionado automático. Puede seleccionar Música enc. o Música apag..
Acerca de Anynet+ ¿Qué es Anynet? Anynet+ es un sistema de red de AV que proporciona a los usuarios una sencilla interfaz AV mediante el control de los dispositivos de AV conectados a través del menú Anynet+ cuando se han conectado dispositivos de AV de Samsung Electronics. Conexión de dispositivos Anynet+ El sistema Anynet+ sólo admite dispositivos de AV compatibles con Anynet+. Compruebe si el dispositivo de AV que va a conectar al televisor lleva la marca Anynet+.
Configuración de Anynet+ Parámetros para usar las funciones Anynet+. Uso de la función Anynet+ 1. ulse el botón Anynet+. P Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2. ulse el botón ENTER para seleccionar Control HDMI y, a continuación, pulse el P botón ENTER.. 3, ulse los botones ▲ o ▼ para seleccionar Activado y, a continuación, pulse el botón P ENTER. La función Control HDMI está activada.
Menú Anynet+ El menú Anynet+ cambia según el tipo y el estado de los dispositivos Anynet+ conectados al televisor. Menú Anynet+ Descripción Ver TV Cambia de Anynet+ al modo de emisión de TV. Menú (Nombre_dispositivo) Muestra el menú del dispositivo conectado. Ejemplo: Cuando hay un grabador de DVD conectado, aparece el menú de títulos del grabador de DVD. Funcionamiento (Nombre_dispositivo) Muestra el menú de control de reproducción del dispositivo conectado.
Escucha a través de un receptor Se puede escuchar sonido a través de un receptor en lugar de hacerlo mediante el altavoz del TV. 1. Pulse el botón Anynet+. Pulse los botones ▲ o ▼ para seleccionar Receptor y, a continuación, pulse el botón ENTER. 2. Pulse los botones ▲ o ▼ para seleccionar Activado y, a continuación, pulse el botón ENTER. Ahora podrá escuchar el sonido a través del receptor. 3. Air 28 Grabar: Enc. Conectar Recorder Configuración Pulse el botón EXIT para salir.
Apéndice Identificación de problemas Si parece que el TV no funciona correctamente, en primer lugar compruebe esta lista de posibles problemas y soluciones. Si no funciona ninguno de estos consejos, llame al centro de servicio más cercano. Problema Posible Solución Imagen deficiente. Intente sintonizar otro canal. Ajuste la antena. Compruebe las conexiones de todos los cables. Calidad de sonido deficiente. Intente sintonizar otro canal. Ajuste la antena. No hay imagen o sonido.
Problema Posible Solución Unas barras horizontales parpadean, tiemblan u oscilan en la imagen. Ajuste la función Grueso y después ajuste la función Fino. Unas barras verticales parpadean, tiemblan u oscilan en la imagen. Ajuste la función Grueso y después ajuste la función Fino. La pantalla está negra y el indicador luminoso de alimentación parpadea constantemente. Compruebe lo siguiente en el equipo: Alimentación, Cable de señal. El TV utiliza su sistema de gestión de energía.
Instalación del soporte <2> <3> 1. Coloque hacia abajo el TV sobre un paño suave o un almohadón sobre una mesa. 2. Coloque el soporte en el orificio de la parte inferior del televisor. 3. Inserte el tornillo en el orificio indicado y apriételo. Desconexión del soporte <2> <3> <4> 1. Coloque hacia abajo el TV sobre un paño suave o un almohadón sobre una mesa. 2. Desmonte los 4 tornillos de la parte posterior del TV. 3. Separe el soporte del TV. 4. Cubra con una tapa el orificio inferior.
Ajuste de montaje en la pared (se vende por separado) Tras instalar el montaje en la pared, puede ajustar fácilmente la posición del televisor. TV Configuración Plug & Play ► Idioma Acceso al menú 1. Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar “Configuración” y, a continuación, pulse el botón ENTER. V-Chip ► Subtítulo ► Transpar. Del menú : Alto ► ▼Más 2.
Especificaciones del equipo de montaje en la pared (VESA) Al colocarlo en otros materiales de construcción, póngase en contacto con el distribuidor más cercano.
Uso del cierre antirrobo kensington El bloqueo Kensington es un dispositivo que se usa para fijar físicamente el sistema cuando se usa en un lugar público. El dispositivo de bloqueo debe adquirirse por separado. La apariencia y el método de bloqueo pueden diferir de la ilustración según los fabricantes. Consulte el manual proporcionado con el bloqueo Kensington para usarlo correctamente.
Especificaciones Nombre del Modelo LN-T4061F LN-T4661F 40 pulg. 46 pulg. 245 W 265 W 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 10W X 2 10W X 2 971 x 87.2 x 628 mm 38.2 X 3.4 X 24.7 pulgadas 971 x 300 x 687 mm 38.2 X 11.8 X 27 pulgadas 1106 x 104.2 x 706 mm 43.5 X 4.1 X 27.8 pulgadas 1106 x 326 x 768 mm mm 43.5 X 12.8 X 30.2 pulgadas 21.1kg (46.52 lbs) 17.8 kg (39.24 lbs) 29.6kg (65.26 lbs) 24.2kg (53.
Esta pagina se ha dejado en blanco expresamente. BN68-01178A-Spa.