Troubleshooting
Symptoms Causes and Actions
The USB memory device or
SD card is not recognized.
Connect the storage device to a PC and check if it is recognized. If it
is not recognized, format the storage device and then try again.
I have set the On Timer, but
the product is not turned on
automatically.
This product is only turned on automatically when it has been turned
off automatically by the Off Timer. If you manually turn the product off
after setting the On Timer function, it will not be automatically turned
on.
Screen blinks steadily
or the power abruptly
turns off, when using the
power through USB Cable
connection.
This is due to unstable USB connection power supply from PC. So
please make sure that the sub (DC 5V) USB connector is connected
to PC as well.
Specications
Items Specifications
Model Name SPF-87H SPF-107H
Panel
Type 8” TFT LCD 10” TFT LCD
Resolution 800 x 480 1024 x 600
Supported Formats JPEG (Progressiv, CMYK JPEG is not supported)
Built-in Memory 1GB
USB Host (USB 1.1) / Device (USB 2.0)
Power
Rating External DC power adapter (12V)
Consumption
Normal mode: 5.2W
Power off mode: Under 1W
Normal mode: 5.9W
Power off mode: Under 1W
General
Dimensions
(WxHxD)
236.0 (W) x 159.4 (H) x 23.0
(D) mm
(9.29 (W) x 6.28 (H) x 0.91
(D) inch)
236.0 (W) x 188.0 (H) x 23.0
(D) mm
(9.29 (W) x 7.40 (H) x 0.91
(D) inch)
Weight 500g (1.1 lbs) 600g (1.3 lbs)
・
The product design may differ according to the model, and specications are subject to
change without prior notice for product performance enhancement.
Multiview 2
・ Multiple Photos are displayed
overlapping on the screen in turns.
The following modes
[Transition(Slideshow Settings), Rotate,
Zoom, AspectRatio, Delete, and Set as
Background] are not available.
※ While playing a Slideshow, you can switch the Slideshow Mode by
pressing the [
] button.
Clock
Date and Time, Time Format, Date Format, Clock Type
Settings
Options
Language, Brightness, Auto Fit Portrait Photo, Frame Memory Copy, Activate
USB Communication
Preference Starting Mode, Screen Saver, Home Background, Auto Picture On/Off
Update/Reset Firmware Update, Reset Settings, Product Information
Updating the rmware
Preparations
・
Digital Photo Frame, Firmware update le, SD card or USB memory stick.
Updating
・
Please visit the Download Center (http://www.samsung.com) and download the rmware by searching the
model name.
・
Please download appropriate rmware and decompress it.
・
Please copy the decompress le (***.isp) to either an SD card or USB memory stick and connect
to the Digital Photo Frame.
・
Please select [Settings] - [Update/Reset] - [Firmware Update] for rmware update.
・
When update is completed, please turn off, then turn on the Digital Photo Frame.
・
The rmware version can be checked through [Settings] - [Update/Reset] - [Product Information]
Mini-monitor mode
・
You can use this product as an auxiliary monitor as well as a monitor to view photos.This feature enables you
to work more efciently than that with single monitor.For this purpose, install an additional Frame Manager
program and connect the USB cable supplied with the product to a PC. For more information about the
installation procedures and downloading the program, please visit the http://www.samsung.com website.
(Only one auxiliary monitor is supported.)
4
English
BN68-01567H.indb4 2009-05-20��4:09:48