User Manual

English-19
Storing Channels Manually
You can store up to 100 channels, including those received via
cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to
identify.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the or button to select the Channel .
Result
: The options available in the Channel group are displayed.
3 Press the ENTER button.
4 Press the or button to select the Manual Store .
Press the
ENTER button.
Result
: The options available in the Manual Store group are
displayed with the
Prog. selected.
5 Press the ENTER button again.
To assign a programme number to a channel, find the correct
number by pressing the or button and then press the
ENTER button.
6 Press the or button to select Colour System .
Press the
ENTER button.
Select the
Colour System required by pressing the or button
repeatedly and then press the
ENTER button.
Result
: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NTSC4.43 - NTSC3.58
7 Press the or button to select Sound System .
Press the
ENTER button.
Select the
Sound System required by pressing the or button
repeatedly and then press the
ENTER button.
Result
: The sound standards are displayed in the following order:
BG - DK - I - M
8 For all the channels to move to the required channel numbers,
repeat steps 5 to 7 after selecting Prog. by pressing the
or button.
02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 19