User Manual

English-20
Storing Channels Manually
9 If you know the channel number to be stored,
Press the or button to select the
Channel .
Press the
ENTER button.
Select
C (Air channel) or S (Cable channel) by pressing the
or button and then press the
ENTER button.
Press the button to select the
Channel .
Select the required number by pressing the or button
and then press the
ENTER button.
If there is normal sound or no sound, re-select the
sound system required.
10 If you do not know the channel numbers, press the or button
to select
Search .
Press the
ENTER button.
Start the
Search by pressing the or button.
Press the
ENTER button.
Result
: The tuner scans the frequency range until the first channel
or the channel that you selected is received on your screen.
11 Press the or button to select Store .
Press the
ENTER button.
The
OK is selected.
Result
: The channel and associated programme number are
stored.
12 Repeat Steps 9 to 11 for each channel to be stored.
13 Press the EXIT button to return to normal viewing.
Channel mode
P
(Programme mode): When tuning is completed, the broadcasting
stations in your area will have been assigned to position numbers
from P00 to P99. You can select a channel by entering the position
number in this mode.
C (Real channel mode): You can select a channel by entering the
assigned number to each broadcast station in this mode.
S (Cable channel mode): You can select a channel by entering the
assigned number to each cable channel in this mode.
02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 20