User Manual
Table Of Contents
- Contents
- CONNECTING AND PREPARING YOUR TV
- Viewing the Control Panel
- Viewing the Connection Panel
- Viewing Pictures From External Sources
- Inserting the Batteries in the Remote Control
- Viewing the Remote Control (All Functions Except Teletext)
- Viewing the Remote Control (Teletext Functions)
- Switching On and Off
- Placing in Standby Mode
- Becoming Familiar with the Remote Control
- Plug & Play
- Selecting TV Mode or an Input Source
- Editing an Input Source Name
- SETTING THE CHANNELS
- SETTING THE PICTURE
- SETTING THE SOUND
- SETTING THE TIME
- USING THE VARIOUS FUNCTIONS
- USING THE TELETEXT FEATURE
- USING THE PC FUNCTIONS
- RECOMMENDATIONS FOR USE
- CONNECTING AND PREPARING YOUR TV
English-45
Power Saver
This set has a built-in power management system called PowerSaver. This system saves energy by
switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA
DPMS compliant video card installed in your computer. You use a software utility installed on your
computer to set up this feature.
State Normal Operation
Power-Saving Function mode
(EPA/NUTEK)
Horizontal Sync Active Inactive
Vertical Sync Active Inactive
Power Indicator Off Red, Blinking (1 sec interval)
Power Consumption 15” 40W, 17” 45W, 20” 55W Less than 3W
➣
This set automatically returns to normal operation when horizontal and vertical sync
are restored.
This occurs when you move the computer’s mouse or press any key on the keyboard.
Troubleshooting: Before Contacting Service Personnel
In PC mode, the image is not stable and
may appear to vibrate.
In PC mode, the image is not centred on
the screen.
◆ Check that the display resolution and frequency from your
computer or video board is an available mode for your set.
On your computer check: Control Panel, Display, Settings.
◆ If the setting is not correct, use your computer utility programme to
change the display settings.
◆ Adjust the horizontal and vertical position.
Your set supports multiscan display functions within the
following frequency domain:
Horizontal
frequency(kHz)
Vertical frequency(Hz)
Maximum refresh rate
(at 75Hz)
15”(LS15M23C)
30~69
50~75
1024X768
17”(LS17M24C)
30~80
50~75
1280X1024
20”(LS20M22C)
28~47
50~75
800X600
Note : The component terminal of this set only supports 480i/480p/576i/576p resolution.
Do not display a still image (such as on a video game or when hooking up a DVD to this LCD TV) on the Color
TFT-LCD (Thin Film Transister Liquid Crystal Display) panel for a long time as it can cause screen image
retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree
of brightness and contrast of this screen when displaying a still image.
04-BN68-00633J-01Eng.qxd 7/28/04 2:25 PM Page 45