User Manual
Table Of Contents
- Table Of Contents
- Before Using the Product
- Preparations
- 1.1 Checking the Components
- 1.2 Parts
- 1.2.1 Frontal Buttons (SE200 Series)
- 1.2.2 Frontal Buttons (S**E450B*, S**E650B*)
- 1.2.3 Frontal Buttons (S**E450M*)
- 1.2.4 Frontal Buttons (S**E450D*)
- 1.2.5 Reverse Side (SE200 Series)
- 1.2.6 Reverse Side (S**E450B*, S**E650B*)
- 1.2.7 Reverse Side (S**E450M*)
- 1.2.8 Reverse Side ( S**E450D*)
- 1.2.9 Right Side View (S**E450D*)
- 1.3 Installation
- 1.3.1 Attaching the Stand (SE200 Series)
- 1.3.2 Attaching the Stand (SE450, SE650 Series)
- 1.3.3 Removing the Stand (SE200 Series)
- 1.3.4 Adjusting the Product Tilt (SE200 Series)
- 1.3.5 Adjusting the Product Tilt and Height (SE450, SE650 Series)
- 1.3.6 Rotating the Monitor (SE450, SE650 Series)
- 1.3.7 Installing a Wall-mount Kit or Desktop Stand
- 1.3.8 Anti-theft Lock
- Connecting and Using a Source Device
- Screen Setup
- 3.1 Brightness
- 3.2 Contrast
- 3.3 Sharpness
- 3.4 Eye Saver Mode
- 3.5 Game Mode
- 3.6 SAMSUNG MAGIC Bright
- 3.7 SAMSUNG MAGIC Angle (Except S19E200NY / S22E200NY / S24E650BW)
- 3.8 SAMSUNG MAGIC Upscale
- 3.9 Image Size (Except S19E200BR / S19E450BR / S19E450MR)
- 3.10 Response Time (S24E650BW)
- 3.11 H-Position & V-Position
- 3.12 Coarse
- 3.13 Fine
- Configuring Tint
- Resizing or Relocating the Screen
- Setup and Reset
- 6.1 Reset All
- 6.2 Smart Eco Saving
- 6.3 Off Timer (S19E200NW / S19E200NY / S22E200N / S22E200NY)
- 6.4 Off Timer Plus (Except S19E200NW / S19E200NY / S22E200N / S22E200NY)
- 6.5 PC/AV Mode (Except S19E200NW / S19E200NY / S22E200N / S22E200NY)
- 6.6 Key Repeat Time
- 6.7 Source Detection (Except S19E200NW / S19E200NY / S22E200N / S22E200NY)
- INFORMATION Menu and Others
- Installing the Software
- Troubleshooting Guide
- Specifications
- 10.1 General (S19E200NY / S19E200NW)
- 10.2 General (S19E200BW / S19E200BR)
- 10.3 General (S22E200NY)
- 10.4 General (S22E200B / S22E200N / S22E200BW)
- 10.5 General (S23E200B / S24E200BL)
- 10.6 General (S19E450BW / S19E450MW / S19E450BR / S19E450MR)
- 10.7 General (S22E450B / S22E450M / S22E450D)
- 10.8 General (S22E450BW / S22E450MW / S22E450DW)
- 10.9 General (S23E450B)
- 10.10 General (S24E450BL / S24E450DL)
- 10.11 General (S24E450B / S24E450M / S24E450D)
- 10.12 General (S24E650BW)
- 10.13 General (S27E450B / S27E450D)
- 10.14 PowerSaver
- 10.15 Standard Signal Mode Table
- Appendix
- Index
35
Preparations
1
1 Preparations
1.3 Installation
1.3.1 Attaching the Stand (SE200 Series)
Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Insert the Stand Connector into
the Stand in the direction shown
by the figure.
Check if the Stand Connector is
firmly connected.
Turn the connecting screw at the
bottom of the stand fully so that it
is completely fixed.
Place a soft cloth over the table
to protect the product and place
the product onto the cloth so
that the front of the product is
facing downwards.
Hold the main body of the
product with your hand as
shown by the figure.
Push the assembled stand into
the main body in the direction of
the arrow as shown in the figure.
- Caution
Do not hold the product upside
down only by the stand.