User Manual (ver.1.0)

Setup and Reset

6 Setup and Reset

6.4 PC/AV Mode (S19D300HY / S19D340HY / S20D300BY /

S20D300H / S20D340H / S20D300HY / S20D340HY /

S22D300BY / S22D300HY / S22D340HY / S24D300BL /

S24D300H / S24D340H / S24D300HL / S24D340HL)

Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.

z This function does not support Analog mode.

z Supplied for the wide models only such as 16:9 or 16:10.

z If the monitor (when set to DVI or HDMI) is in power saving mode or is displaying the message

Check Signal Cable, press the MENU button to display the On Screen Display(OSD).

You can select PC or AV.

z The functions available on the monitor may vary depending on the model. Refer to the actual

product.

6.4.1 Configuring PC/AV Mode

1 Press any button on the front of the product to display the Key guide. Next, press [ ] to display

the corresponding menu screen.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to PC/AV Mode and press [ ] on the product.

4 Press [ ] to move to DVI or HDMI, and press [ ]. And press [ ] again.

The following screen will appear.

5 Press [ ] to move to the option you want and press [ ].

6 The selected option will be applied.

ENU

SETUP&RESET

Off

Acceleration

Auto

Reset All

Eco Saving

Off Timer

PC/AV Mode

Key Repeat Time

Source Detection

Set to AV to enlarge

the picture.

AUTO

PC/AV Mode

DVI

Select the PC/AV mode

for the DVI source.

AUTO

PC/AV Mode

HDMI

Select the PC/AV mode

for the HDMI source.

AUTO