User manual

3. When all the connections are completed, connect the power cords for the monitor and

DVD (or the device connected to the digital output terminal).

4. Select "HDMI" using the 'SOURCE [ ]' button.

Note

If you just connect using the DVI to HDMI cable without connecting to the sound source,

you cannot hear sound.

Connecting the audio output terminal of a digital device to the

[R-AUDIO-L]

[COM-

PONENT IN]

of the monitor using an audio cable will not give you sound. Make sure to

connect to the

[HDMI / PC/DVI-D AUDIO IN]

terminal of the monitor.

Connecting a Component cable

Note

Connect

to the DVD / DTV Set Top Box input if the device has a [COMPONENT IN] connector.

You can watch Component simply by hooking up the Component with the monitor as long as

the power is on.

Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the

[R-AUDIO-L]

port of

the monitor.

Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the

, P

,Y]

input ports

using a component video cable (P

, P

,Y).

Note

Select "Component" using the 'SOURCE [ ]'

you connect the P

, P

, and Y component cables to the incorrect terminals, the screen will

be displayed in red or blue.

For single-family houses, install an UHF antenna to receive digital broadcasting.

Connections