User manual

Fine Tune
If the reception is clear, you do not have to fine tune the channel, as this is done automatically
during
the search and store operation. If the signal is weak or distorted, you may have to fine
tune the channel manually.
Note
Fine
tuned channels that have been saved are marked with an asterisk “ * ” on the right-hand
side of the channel number in the channel banner.
To reset the fine-tuning, select Reset by pressing the
or button and then press the ENTER
button.
Only Analogue TV channels can be fine tuned.
Setup
Note
The
default setting may be different depending on the selected Input Mode (input signal
source selected in External Input List) and the selected resolution.
Plug & Play
When the TV is initially powered on, several basic settings proceed automatically and sub
sequently. the following settings are available.
Adjusting the LCD Display