User manual

Note
This function is only available when Clock Mode is set to manual.
You
can set the day, month, year,hour and minute directly by pressing the number buttons
on the remote control.
Sleep Timer
Use to set the Monitor to be turned off automatically in certain minutes.
Press the
TOOLS button to display the Tools menu. You can also set the sleep timer by
selecting Tools → Sleep Timer.
• Off, 30 min, 60 min, 90 min, 120 min, 150 min, 180 min
Note
To cancel the Sleep Timer function, select Off.
Timer1 / Timer2 / Timer3
You can have the monitor turned on or off automatically at a specified time.
• On time
Set to the hour, minute and “activate”/” inactivate”.
(To activate timer with the setting you‘ve chosen, set to ‘activate’)
• Off time
Set to the hour, minute and “activate”/” inactivate”.
(To activate timer with the setting you‘ve chosen, set to ‘activate’)
• Volume
Select the required volume level.
• Antenna
Select ATV or DTV.
• Channel
Select the desired channel.
• Repeat
Select "Once", "Everyday", "Mon~Fri", "Mon~Sat" or "Sat~Sun" or Manual.
When Manual is selected, press the
button to select the desired day of the week.
Press the ENTER
button over the desired day and the mark will appear.
Note
You
can set the hour, minute and channel by pressing the number buttons on the remote
control.
Adjusting the LCD Display