User manual

1. Connect the
HDMI IN (1 or 2) jack on the TV and the HDMI OUT jack of the corresponding
Anynet+ device using an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding
Anynet+ device using an HDMI cable.
Note
Connect
the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV
and the Digital Audio Input on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will
only hear sound from the Home Theatre‘s Front Left and Right speakers and the subwoofer.
If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on
the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theatre,
not the TV.
Connect only one Home Theatre.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not
support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 10 AV devices in total. Note that you can connect up to 3 devices of
the same type.
Setting Up Anynet+
Press the
TOOLS button to display the Tools menu. You can also display Anynet+ menu
by selecting Tools → Anynet+ (HDMI-CEC)
Setup
Adjusting the LCD Display