SyncMaster P2370HD P2570HD P2770HD LCD TV Monitor User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 INSTALLING THE PRODUCT Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Installing the Stand . . . .
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual ICON NAME MEANING Caution Indicates cases where the function may not work or the setting may be canceled. Note Indicates a hint or tip to operate a function. Using this Manual • Make yourself fully aware of the safety precautions before using this product. • If a problem occurs, refer to the 'Troubleshooting' section.
1-2 Care and Maintenance External Surface and Screen Maintenance Clean the product with a soft dry cloth. • Avoid cleaning the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product. • Avoid scratching the screen with your fingernails or a sharp object. • Avoid cleaning the product by spraying water onto it. If water enters the product, it may result in fire, electric shock or a problem with the product.
1-3 Safety Precautions Icons used for safety precautions ICON NAME MEANING Warning Failing to follow the precautions marked with this sign may result in a serious injury or even a fatality. Caution Failing to follow the precautions marked with this sign may result in a personal injury or property damage. Meaning of Signs Do not perform. Must be followed. Do not disassemble. The power plug must be unplugged from the wall outlet. Do not touch. Must be grounded to prevent electric shock.
Caution Avoid unplugging the power plug while the product is operating. • Make sure to use only the power cord supplied by our company. In addition, do not use the power cord of another electric appliance. Otherwise, it may damage the product due to electric shock. • When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord. • Otherwise, it may result in electric shock or fire. Connect the power plug to a wall outlet that can be easily reached.
Avoid installing the product where children may reach it. • • If a child touches the product, the product may fall and this may result in injury. Bend the outdoor antenna cable downwards at the location where it comes in the house so that rainwater does not flow in. • If rainwater enters the product, it may result in electric shock or fire. Since the front part is heavier, install the product on a flat and stable surface. Install the antenna far away from any high voltage cables.
Caution Avoid spraying cleansing agent directly onto the product. • This may result in discoloration or cracking of the exterior of the product or the panel coming off. If you can't get the product clean with just the supplied cloth, use a soft, damp cloth with a "monitor-exclusive cleansing agent" and wipe the product with it. • When cleaning the product, disconnect the power cord and clean the product with the supplied cleaning cloth.
Avoid moving the product by pulling the power cord or antenna cable. • Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable. When a gas leak occurs, do not touch the product or the power plug and ventilate immediately. • A spark may result in an explosion or fire. • During a thunder or lighting storm, do not touch the power cord or antenna cable. Avoid lifting up or moving the product by holding only the power cord or signal cable.
Keep the small accessories in a location out of the reach of children. Take care when adjusting the angle of the product or the height of the stand. • If your hand or finger is caught, you may be injured. • If the product is tilted excessively, the product may fall and this may result in injury. Avoid placing a heavy object over the product. When using headphones or earphones, do not turn the volume too high. • • Otherwise, it may result in a problem with the product or injury.
2 Installing the Product 2-1 Package Contents • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the product at a later stage.
2-2 Installing the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Insert the Stand Connector into the Stand Base in the direction shown by the figure. Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the Stand base fully so that it is completely fixed. Place a soft cloth over the table to protect the product and place the product onto the cloth face down.
Hold the main body of the product with your hand as shown by the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure.
2-3 Removing the Stand Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards. Place a soft cloth over the table to protect the product and place the product face down. Hold the main body of the product with your hand as shown by the figure. Pull the stand in the direction of the arrow as shown in the figure to separate it. Turn the connecting screw at the bottom of the Stand base to separate it from the Stand connector.
2-4 Attaching a Wall Mount/Desktop Stand Attaching a Wall Mount/Desktop Stand(not supplied) P2370HD : This product complies with 75 mm x 75 mm (2.95 x 2.95 inches) VESA specifications. P2570HD : This product complies with 100 mm x 100 mm (3.94 x 3.94 inches) VESA specifications. P2770HD : This product complies with 100 mm x 100 mm (3.94 x 3.94 inches) VESA specifications. A. Wall/Desktop Stand Mount B. Wall mount kit/desktop stand (not supplied) 1.
2-5 Connecting to a Computer 1. Connect the product to a PC depending on the video output supported by the PC. The connecting part may differ depending on the product model. When the graphics card provides a D-Sub (analog) output • Connect the [PC IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
• Connect the [DVI-D IN] port of the product to the [DVI] port of the PC with the DVI cable. 2. Connect the [HDMI/PC/DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of the PC. 3. Connect one end of the power cord to the [ POWER ] port of the product and connect the other end of the power cord to the 110V or 220V wall outlet. (The input voltage is switched automatically.
• You may enjoy clear and quality sound from the computer sound card using the monitor's speakers. (You don't need to install separate speakers for your computer.) • You may get a blank screen depending on the type of video card you are using if you connect the D-sub and DVI cables simultaneously to one computer. • If you connect your monitor properly using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analog.
2-6 Using it as a TV You may view television programs on the monitor if it is connected to an antenna or cable/satellite system without installing any separate TV reception hardware or software on your computer. 1. Connect the cable/satellite or TV antenna cable to the [ANT IN] port on the rear side of the monitor. • When using an indoor antenna/cable/satellite terminal: Check the antenna terminal on the wall and then connect the antenna/cable/satellite TV cable.
2-7 Connecting an HDMI cable Connect the HDMI OUT port of the AV device (Blu-Ray/DVD/Cable/Satellite box) to the [HDMI IN] terminal of the monitor using the HDMI cable. Press the [SOURCE] button at the front of the monitor or on the remote control to select mode. You do not need to make a separate audio connection when connecting via HDMI.
2-8 Connecting Using a DVI to HDMI Cable 1. Connect the DVI output terminal of an external device to the [HDMI IN] terminal of the monitor using a DVI to HDMI cable. 2. Connect the red and white plugs of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite plug to the [HDMI/PC/DVI-D AUDIO IN] terminal of the product. Press the [SOURCE] button at the front of the monitor or on the remote control to select mode.
2-9 Connecting a Component cable 1. Connect the VIDEO OUT port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [PR, PB, Y]] input ports using a component video cable [PR, PB,Y]. 2. Connect the audio port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [[R-AUDIO-L]] port of the monitor. Press the [SOURCE] button at the front of the monitor or on the remote control to select the mode.
2-10 Connecting AV Devices 1. Connect the port of the AV device (DVD/VCR/Cable/Satellite box/Camcorder) to the [AV IN [ R-AUDIO-L ] port of the product. 2. Connect the video output terminal of the AV device and the [AV IN [VIDEO]] of the monitor using a video cable. 3. Select [AV]using the
2-11 Connecting to an Amplifier Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the optical input of your amplifier using an optical cable. 2-11 • If no sound is emitted from the monitor, you need to use an amplifier. • For information on how to connect a speaker and amplifier, refer to the respective user manuals provided by their manufacturers.
2-12 Connecting Headphones Connect your headphones to the Headphone connection terminal.
2-13 Kensington Lock A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device. You have to purchase the locking device separately. Locking the product 1.
3 Using the Product 3-1 Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. 1. Press the [POWER • ] button on the remote control. You can also use the [ ] button on the TV. The message
10. The message is displayed. When you have finished, press the [ ] button. If you want to reset this feature... 1. Press the [MENU] button to display the menu. Press the ▲ or ▼ button to select , then press the [ 2. Press the [ ] button. ] button again to select . The feature is only available in the TV mode.
3-2 Viewing the Control panel Touch one of the operating buttons lightly. The LED buttons appear. ICON DESCRIPTION [ ] Use this button to select a function. Signals other than the TV signal can only be selected if the corresponding device is connected. The order in which the TV/external input signal changes. →→→→→ [MENU] Press this button to view the On Screen Display (OSD). This button is also used to exit the OSD or to return to a higher-level OSD menu.
3-3 Remote Control The performance of the remote control may be affected by a TV or other electronic device operating near the product, causing a malfunction due to interference with the frequency. POWER Turns the product On/Off. TV Selects the TV mode directly. Number Buttons PRE-CH Press to change the channel. This button is used to return to the previous channel viewed. : Press to select additional channels (digital) being broadcast by the same station.
Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the +and - ends of the batteries with the diagram inside the compartment. 3. Close the cover. Remove the batteries and store them in a cool, dry place if you won't be using the remote control for a long time.
3-4 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure TOP MENUS SUB MENUS Picture MagicBright Contrast Brightness Sharpness Auto Adjustment [PC / DVI] Screen Picture Options Picture Reset Picture Mode Backlight Contrast Brightness Sharpness [TV / AV / Component / HDMI] Color Tint (G/R) Advanced Settings Picture Options Picture Reset Sound Mode Equalizer SRS TruSurround HD Preferred Language Multi-Track Sound
Picture [PC / DVI ] The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution MENU MagicBright DESCRIPTION is a feature providing an optimum viewing environment depending on the contents of the image you are watching. Currently five different modes are available: , , , and . Each mode has its own pre-configured brightness value.
MENU Screen DESCRIPTION • Removes noise such as vertical stripes. adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu • Removes noise such as horizontal stripes. If the noise persists even after tuning, repeat it after adjusting the frequency (.) • Adjusts the screen location horizontally and vertically. • Image parameters are replaced with the factory default values.
MENU Mode DESCRIPTION The Monitor has three automatic picture settings (, , and ) that are preset at the factory. You can activate either , , or . • Selects the picture for high-definition in a bright room. • Selects the picture for optimum display in a normal environment. • Selects the picture for viewing movies in a dark room. Press the [TOOLS] button to display the Tools menu.
MENU Picture Options DESCRIPTION • The tone of the color can be changed. • • - - - • or is only activated when the picture mode is . • Settings can be adjusted and stored for each external device you have connected to an input of the TV. You can switch the Size. The direct button on the remote control is [P.SIZE] button. • <16:9> - Sets the picture to 16:9 wide mode.
Sound MENU Mode DESCRIPTION • Choose Standard for the standard factory settings. • Choose Music when watching music videos or concerts. • Choose Movie when viewing movies. • Emphasizes voice over other sounds. • Choose Custom if you want to adjust the settings according to personal preference . Press the [TOOLS] button to display the Tools menu. You can also set the by selecting →.
MENU Multi-Track Sound DESCRIPTION • Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal. • Choose for channels that are broadcasting in stereo. • Choose to listen to the Separate Audio Program, which is usually a foreign-language translation. Available in Analog Mode Only Auto Volume Reduces the differences in volume level among channels.
MENU Antenna DESCRIPTION You can select antenna or cable TV. If [ANT IN] connected, select the antenna input you want. If the antenna input is not selected properly, noise may appear on the screen. • Auto Program - The TV automatically cycles through all of the available channels and stores them in memory. In rare cases, may miss a few channels due to weak signals and the channels may not be added to the channel memory.
MENU Channel List DESCRIPTION Using this menu, you can add / delete or set favorite channels and use the program guide for digital broadcasts. You can select these options by simply pressing the [CH LIST] button on the remote control. • - Shows all currently available channels. • - Shows all added channels. • - Shows all favorite channels. Press the [TOOLS] button to display the menu.
Setup MENU DESCRIPTION Plug & Play This brings up the menu items that appeared when you first plugged in the TV. Language You can set the menu language. The language chosen affects only the language of the OSD. Time • Setting the clock is necessary in order to use the various timer features of the TV. • • The current time will appear every time you press the [INFO] button. • If you disconnect the power cord, you have to set the clock again.
MENU Time DESCRIPTION • The sleep timer automatically shuts off the TV after a preset time . • - <30 min.> - <60 min.> - <90 min.> - <120 min.> - <150 min.> - <180 min.> Press the [TOOLS] button to display the Tools menu. You can also set the sleep timer by selecting →. To cancel the function, select . • / / Three different on / off timer settings can be made. You must set the clock first.
MENU V-Chip (U.S.A only) DESCRIPTION The feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the restrictions are set up or changed. • • function is not available in , or mode.
MENU Caption(On-Screen Text Messages) DESCRIPTION •
You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. • • - • Press the [CC] turn the Caption on or off. • The feature doesn’t work in , or modes. You can select the desired caption mode.MENU Melody DESCRIPTION A melody sound can be set to come on when the monitor is powered On or Off. • - - - The does not play Energy Saving • When no sound is output from the TV because the [MUTE] button has been pressed.
Application MENU Anynet+ (HDMI-CEC) DESCRIPTION What is ? is a function that enables you to control all connected Samsung devices that support with your Samsung TV‘s remote. The system can be used only with Samsung devices that have the feature. To be sure your Samsung device has this feature, check if there is an logo on it. Connecting Anynet+ Devices 1.
Setting Up Anynet+ Press the [TOOLS] button to display the Tools menu. You can also display the menu by selecting → Setup MENU DESCRIPTION Anynet+ (HDMI-CEC) To use the Function, must be set to On. When the function is disabled, all the< Anynet+> related operations are deactivated. Auto Turn Off Setting an Device to turn Off automatically when the TV is turned off.
- If you cannot find a device you want, press the red button to scan for devices. 3. Press the or button to select a particular device and press the [ ] button. It is switched to the selected device. - must be set to On in the menu for the menu to appear. Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
MENU Self Diagnosis DESCRIPTION • • Self Diagnosis •
3-5 Installing the Device Driver If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is included on the CD supplied with the product. If the supplied drive file is corrupted, please visit the Samsung Electronics website (www.samsung.com), and download the driver. 1. Insert the driver installation CD into the CD-ROM drive. 2. Click on Windows Driver. 3. Select the model of your product from the model list. 4.
3-6 Standard Signal Mode Table An LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent characteristics of the panel, unlike a CDT monitor. Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product. If the signal from the PC is one of the following standard signal modes, the screen is set automatically.
RESOLUTION HORIZONTAL FREQUENCY (KHZ) VERTICAL FREQUENCY (HZ) CLOCK FREQUENCY (MHZ) POLARITY (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
4 Installing the Software 4-1 Natural Color What is Natural Color ? This software is for Samsung products only and enables you to adjust the displayed colors on the product so they more closely match the colors of printed pictures. For more information, refer to the online help of the software (F1). Natural Color is provided online. You can download it from the website below and install; http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.
4-2 MultiScreen What is MultiScreen ? MultiScreen enables you to partition multiple sections on the Monitor. Installing the Software 1. Insert the installation CD into the CD-ROM drive. 2. Select the MultiScreen setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the MultiScreen setup file on the CD-ROM. 3. When the Installation Wizard appears, click [Next]. 4.
5 Troubleshooting 5-1 Monitor Self-Diagnosis • You can check if the product is working properly using the Self-Diagnosis function. • If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the self-diagnosis function according to the procedures below. 1. Turn the product and the PC off. 2. Remove the D-Sub cable from the product. 3. Turn the product on. 4. If the product is working properly, the message appears.
5-2 Before Requesting Service Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center. PROBLEMS RELATED TO INSTALLATION (PC MODE) The monitor screen flickers. Check if the signal cable between the computer and the monitor is securely connected and tightened. (Refer to Connecting to a Computer) PROBLEMS RELATED TO SCREEN Screen is blank and power indicator is off.
NOTE ON THE PRODUCT APPEARANCE You may see small particles if you look closely at the edge of the bezel surrounding the screen. Troubleshooting This is part of the product's design and is not a defect.
5-3 FAQ FAQ PLEASE TRY THE FOLLOWING! How can I change the frequency of the video signal? You have to change the frequency of the graphics card. How can I change the resolution? Windows XP: Change the resolution by selecting Control Panel →Appearance and Themes→Display→Settings. (For more information, refer to the User Manual of the computer or the graphics card.) Windows ME/2000 : Change the resolution by selecting Control Panel →Appearance and Themes→Display→Settings.
6 More Information 6-1 Specifications MODEL NAME LCD Panel Synchronization P2570HD P2770HD Screen Size 23 inches (58 cm) 24.6 inches (62 cm) 27 inches (68 cm) Display Area 509.76 mm (H) X 286.74 mm (V) ( 20.06 inches X 11.29 inches) 543.46 mm (H) X 305.69 mm (V) ( 21.40 inches X 12.04 inches) 597.89 mm (H) X 336.31 mm (V) ( 23.5 inches X 13.2 inches) Pixel Pitch 0.2655 mm (H) X 0.2655 mm (V) (0.01 inches X 0.01 inches) 0.283 mm (H) X 0.283 mm (V) (0.01 inches X 0.01 inches) 0.
Class B (Information Communication Equipment for Home Use) This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment emits less electromagnetic waves than Class A equipment.
6-2 Power Saving Function This product provides a power saving function that automatically turns the screen off when the product is not used for a predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a different color to indicate that the product is in power saving mode. When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key or clicking the mouse.
6-3 Contact SAMSUNG WORLDWIDE • If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG(726-7864) http://www.samsung.com/mx LATIN AMERICA ARGENTINA 0800-333-3733 http://www.samsung.com/ar BRAZIL 0800-124-421 http://www.samsung.
EUROPE GERMANY 01805 - SAMSUNG (7267864,€ 0.14/ Min) http://www.samsung.de HUNGARY 06-80-SAMSUNG(726-7864) http://www.samsung.com/hu ITALIA 800-SAMSUNG(726-7864) http://www.samsung.com/it LUXEMBURG 02 261 03 710 http://www.samsung.com/lu NETHERLANDS 0900 - SAMSUNG (0900-7267864) (€ 0,10/Min) http://www.samsung.com/nl NORWAY 3 - SAMSUNG (7267864) http://www.samsung.com/no POLAND 0 801 1SAMSUNG (172678) http://www.samsung.
ASIA PACIFIC INDONESIA 0800-112-8888 http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com/jp MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com/nz PHILIPPINES 1-800-10-SAMSUNG(726-7864) http://www.samsung.com/ph 1-800-3-SAMSUNG(726-7864) 1-800-8-SAMSUNG(726-7864) 02-5805777 SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung.com/sg THAILAND 1800-29-3232, 02-689-3232 http://www.samsung.