SyncMaster P2370HD P2570HD Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene cualquier comentario o pregunta referentes a los productos Samsung, póngase en contacto con el centro de atención al cliente de SAMSUNG. Country U.S.A Customer Care Center 1-800SAMSUNG (726-7864) Web Site www.samsung.com/us Address Samsung Electronics America, Inc.
❑❑ Important Warranty Information Regarding Television Format Viewing NN See the warranty card for more information on warranty terms. Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
English Contents General Information Picture Control ■■Accessories.................................................. 2 ■■Viewing the Control Panel............................ 2 ■■Viewing the Connection Panel..................... 3 ■■Remote Control............................................ 4 ■■ Installing Batteries in the Remote Control. .......... 4 ■■Configuring the Picture Menu (TV / AV / Component / HDMI ).................................. 15 ■■ Using Your TV as a Computer (PC) Display. .....
General Information ¦¦ Accessories Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. Remote Control & Batteries (AAA x 2) (Not available in all locations) / Power Cord / Cleaning Cloth / User Manual (CD, Book) / Quick Setup Guide / Warranty Card (Not available in all locations) / Cable holding ring / Stand Body / Stand Base NN The items color and shape may vary depending on the model.
¦¦ Viewing the Connection Panel [TV Rear Panel] DVI-D IN HDMI/PC /DVI-D AUDIO IN PC IN ANT IN HDMI IN DIGITAL AUDIO OUT (OPTICAL) SERVICE R - AUDIO - L AV IN VIDEO 12 NN The product color and shape may vary depending on the model. 1 DVI-D IN –– Connects to the video jacks on your PC. 2 HDMI/PC/DVI-D AUDIO IN –– Connect the HDMI/PC/DVI-D AUDIO IN terminal at the back of your product to your computer’s sound card. 3 PC IN –– Connects to the video jacks on your PC.
¦¦ Remote Control NN You can use the remote control up to a distance of about 23 feet from the TV. NN The performance of the remote control may be affected by bright light. NN The product color an shape may vary depending on the model. 1 POWER:Turns the TV on and off. 2 NUMERIC BUTTONS: Press to change the channel. 3 : The “-” button operates only for TV. It is used to select MMS (multi-channel) for a TV. 4 VOL / VOL : Press to increase or decrease the volume.
Connections ¦¦ Connecting VHF and UHF Antennas If your antenna has a set of leads that look like the diagram to the right, see ‘Antennas with 300 Ω Flat Twin Leads’ below. If your antenna has one lead that looks like the diagram to the right, see ‘Antennas with 75 Ω Round Leads’. If you have two antennas, see ‘Separate VHF and UHF Antennas’. Antennas with 300 Ω Flat Twin Leads 1. 2.
¦¦ Connecting Cable TV To connect to a cable TV system, follow the instructions below. ANT IN Cable without a Cable Box Plug the incoming cable into the ANT IN terminal on the back of the TV. NN Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1. 2. Find the cable that is connected to the ANT OUT terminal on your cable box. NN This terminal might be labeled ‘ANT OUT’, ‘VHF OUT’ or simply, ‘OUT’.
¦¦ Connecting a DVD / Blu-Ray player / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device.
¦¦ Connecting a DVD / Blu-Ray player / Satellite receiver (Set-Top Box) via DVI This connection can only be made if there is a DVI Output connector on the external device.
¦¦ Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/ Receiver) to your TV.
Using the DVI Cable TV Rear Panel HDMI/PC /DVI-D AUDIO IN DVI-D IN PC PC IN HDMI/PC /DVI-D AUDIO IN DVI-D IN ANT IN PC IN ANT IN HDMI IN DIGITAL AUDIO OUT (OPTICAL) R SERVICE HDMI IN DIGITAL AUDIO OUT (OPTICAL) 1 DVI Cable (Not supplied) R SERVICE - AUDIO - L AV IN - AUDIO - L AV IN VIDEO VIDEO 2 Stereo Cable (Not supplied) NN When connecting a PC, match the color of the connection terminal to the cable. NN The DVI jack is only available in the PC timing.
Operation ¦¦ Turning the TV On and Off Press the POWER P button on the remote control. You can also use the P button on the TV. ¦¦ Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically Plug & Play and subsequently. Select Language of the OSD. 1. Press the POWER P button on the remote control. Language : English r NN You can also use the P button on the TV. E Enter 2. Press the E button, then “Select Language of the OSD.” menu is automatically displayed. 3.
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the E button. 2. Press the E button again to select “Plug & Play”. For further details on setting up options. NN The “Plug & Play” feature is only available in the TV mode. Channel Control CHANNEL CONTROL ¦¦ Configuring the Channel Menu Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
¦¦ Managing Channels All Channels Shows all currently available channels. Added Channels Using this menu, you can add / delete or set favorite channels and use the program guide for digital broadcasts. Added Channels Shows all added channels. 2 Air 4 Air 4-2 ♥ TV #8 8 Air 13 Air 13-1 ♥ TV #3 Alice’s Adventures in Wonderland Favorite Air Zoom Select T Tools Shows all favorite channels. OO To select the favorite channels you have set up, press the FAV.CH button on the remote control.
NN The ♥ symbol will be displayed and the channel will be set as a favorite. NN All favorite channels will be shown in the Favorite menu. Timer Viewing If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a program, set the current time first. NN Only memorized channels can be reserved.
Picture Control ¦¦ Configuring the Picture Menu (TV / AV / Component / HDMI ) You can select the type of picture which best corresponds to your viewing requirements. Picture ❑❑ Mode Dynamic Selects the picture for increased definition in a bright room. Standard Selects the picture for the optimum display in a normal environment.
16:9 Zoom2 U Move Zoom1 U Move 16:9 Zoom1 Wide Fit U Move Zoom2 Screen Fit 4:3 Wide Fit 4:3 Screen Fit NN Temporary image retention may occur when viewing a static image on the set for more than two hours. NN After selecting “Zoom1”, “Zoom2” or “Wide Fit”: Press the ◄ or ► button to select “Position”, then press the E button. Press the ▲ or ▼ button to move the picture up and down. Reset: Press the ◄ or ►button to select “Reset”, then press the E button. You can initialize the setting.
¦¦ Using Your TV as a Computer (PC) Display NN When prompted by the operating system for the monitor driver, insert the CD included in this product. For details, please refer to User’s Guide in CD. Setting Up Your PC Software (Based on Windows XP) 1. 2. 3. 4. The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card.
¦¦ Setting up the TV with your PC NN Preset: Press the SOURCE button to select PC mode. ❑❑ MagicBright : Entertain / Internet / Text / Dynamic Contrast / Custom ❑❑ Contrast / Brightness / Sharpness Picture MagicBright is a feature providing optimum viewing environment depending on the contents of the image you are watching. Currently five different modes are available: Entertain, Internet, Text, Dynamic Contrast and Custom. Each mode has its own pre-configured brightness value.
Size: 16:9 / 4:3 O Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size. NN 16:9 : Sets the picture to 16:9 wide mode. NN 4:3 : Sets the picture to 4:3 normal mode. ❑❑ Reset : Reset Picture Mode / Cancel Resets all picture settings to the default values. NN Reset Picture Mode: Current picture values return to default settings.
Sound Control ¦¦ Configuring the Sound Menu You can select a sound mode to suit your personal preferences. Sound ❑❑ Mode → Standard / Music / Movie / Clear Voice / Custom Mode : Custom SRS TruSurround HD : Off Preferred Language : English The sound settings can be adjusted to suit your personal preference. Multi-Track Sound : Mono Auto Volume : Off Mode Selects the sound mode among the predefined settings.
❑❑ Speaker Select Used to listen to the sound of the TV Speakers. When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home theater’s (external) speakers. External Speaker: Used to listen to the sound of the External (Home Theater) Speakers. TV Speaker: Used to listen to the sound of the TV Speakers. OO If you select External Speaker in the Speaker Select menu, the sound settings will be limited.
●● Clock Set You can set the current time manually. NN This function is only available when “Clock Mode” is set to “Manual”. NN You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control. ●● Time Zone Select your time zone. NN This function is only available when “Clock Mode” is set to “Auto”. ●● DST (Daylight Saving Time) → Off / On / Auto Switches the Daylight Saving Time function on or off.
❑❑ V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. NN “V-Chip” function is not available in HDMI, Component or PC mode. NN The default PIN number of a new TV set is ‘0-0-0-0’ NN If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).
NN The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block G category, then PG, 14+ and 18+ will automatically be blocked also. Canadian French ●● G: General ●● 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. ●● 13 ans+: Programming may not be suitable for children under the age of 13. ●● 16 ans+: Programming is not suitable for children under the age of 16.
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”) 1. Received Rating: TV-14/NL If the TV is tuned to a restricted channel, the V-Chip will block it. This channel is blocked by a Parental Lock. Prees enter the PIN The screen will go blank and the following message will appear: to unblock. Enter your PIN, then press the E button and press the ▲ or ▼ button to temporarily disable the V-Chip Lock.
You can turn on/off the LED on the front of monitor according to the situation. Use it for saving power or when the LED dazzles your eyes. ❑❑ Light Level Use to adjust the light level i.e., the brightness of the light. ❑❑ Melody → Off / Low / Medium / High A melody sound can be set to come on when the TV is powered On or Off. NN The Melody does not play. –– When no sound is output from the TV because the MUTE button has been pressed.
¦¦ Configuring the Support Menu ❑❑ Self Diagnosis Support Picture Test If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still Self Diagnosis ► exists. Software Upgrade ●● Yes: If the test pattern does not appear or there is noise in HD Connection Guide the test pattern, select Yes. There may be a problem with the Contact Samsung TV. Contact Samsung’s call center for assistance.
❑❑ HD Connection Guide This menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when connecting external devices to the TV. ❑❑ Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call center, product and software file download method.
To connect to Home Theater TV DIGITAL AUDIO OUT (OPTICAL) HDMI IN Home Theater Optical Cable 1. 2. HDMI 1.3 Cable Anynet+ Device HDMI 1.3 Cable Connect the HDMI IN jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
¦¦ Setting Up Anynet+ Application TT Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+ (HDMI-CEC). Anynet+ (HDMI-CEC) ► ❑❑ Setup Anynet+ (HDMI-CEC) → Off / On To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. NN When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu View TV Device List (device_name) Menu (device_name) Operation Record: (*recorder) Stop Recording: (*recorder) Receiver Description Anynet+ mode changes to TV broadcast mode. Shows the Anynet+ device list. Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. Shows the play menu of the connected device. E.g.
¦¦ Troubleshooting for Anynet+ Problem Anynet+ does not work. I want to start Anynet+. I want to exit Anynet+. The message Connecting to Anynet+ device... appears on the screen. The Anynet+ device does not play. The connected device is not displayed. The TV program cannot be recorded. The TV sound is not output through the receiver. Possible Solution ●● Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ●● Connect only one receiver (home theater).
Appendix ¦¦ Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Problem Possible Solution Poor picture. Try another channel. / Adjust the antenna. / Check all wire connections. Poor sound quality. Try another channel. / Adjust the antenna. No picture or sound. Try another channel. / Press the SOURCE button. Make sure the TV is plugged in.
Problem Possible Solution Ghosting on picture. This is sometimes caused by compatibility issues with your cable box. Try connecting Component cables instead. Screen is black and power indicator light blinks steadily. On your computer check: Power, Signal Cable. The TV is using its power management system. Move the computer's mouse or press any key on the keyboard. Image is not stable and may appear to vibrate when you have a computer connected to the PC input.
¦¦ Wall Mount Kit Specifications (VESA) P2370HD :75 mm (2.95 inches) P2570HD :100 mm (3.94 inches) P2370HD :75 mm (2.95 inches) Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your P2570HD :100 mm (3.94 inches) nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
¦¦ Specifications Model Name P2370HD P2570HD Screen Size Diagonal 23 inches (58 cm) 24.6 inches (62 cm) Display area 509.76 mm(H) x 286.74 mm(V) ( 20.06 inches X 11.29 inches) 543.46 mm (H) X 305.69 mm (V) ( 21.40 inches X 12.04 inches) Pixel Pitch 0.2655 mm(H) x 0.2655 mm(V) ( 0.01 inches X 0.01 inches) 0.283 mm (H) X 0.283 mm (V) ( 0.01 inches X 0.01 inches) Display Color Maximum Pixel Clock 16.7M 148.500 MHz (Analog, Digital) Power Supply AC 100 - 240 V~ (+/- 10 %).
This page is intentionally left blank.
❑❑ Información importante sobre la garantía relativa al formato de visualización del televisor Las pantallas LCD con formato de pantalla panorámica (16:9, la relación de aspecto ancho:alto de la pantalla) están diseñadas principalmente para visualizar vídeos de movimiento de formato panorámico. Las imágenes deben estar principalmente en el formato panorámico de relación 16:9, o ampliadas para llenar la pantalla si el modelo tiene esta opción, y las imágenes están en movimiento constante.
Contenido Información General Control de la imagen Conexiones ■■Control de la imagen(TV / AV / Componente / HDMI )...................................................... 15 ■■Uso del televisor como una pantalla de ordenador (PC)........................................... 17 ■■Ajuste del televisor con el ordenador......... 18 Control de Sonido ■■Conexión de antenas de VHF y UHF........... 5 ■■Conexión de TV por cable............................
Información General ¦¦ Accesorios Compruebe que las opciones siguientes se incluyen con su TV LCD. Si falta alguna opción, póngase en contacto con el proveedor.
¦¦ Aspecto general del panel de conexiones [Panel posterior del TV] DVI-D IN HDMI/PC /DVI-D AUDIO IN PC IN ANT IN HDMI IN DIGITAL AUDIO OUT (OPTICAL) SERVICE R - AUDIO - L AV IN VIDEO 12 NN El color y la forma del producto pueden variar según el modelo. 1 DVI-D IN –– Se conecta a los terminales de vídeo del PC. 2 HDMI/PC/DVI-D AUDIO IN –– Conecte el terminal HDMI/PC/DVI-D AUDIO IN de la parte posterior del producto a la tarjeta de sonido del ordenador.
¦¦ Mando a distancia NN Puede utilizar el mando a una distancia del televisor de hasta 21 metros. NN El exceso de luz puede influir en el rendimiento del mando a distancia. NN El color y la forma del producto pueden variar según el modelo. 1 POWER:Enciende o apaga el TV. 2 BOTONES NUMÉRICOS: Permiten cambiar de canal. 3 : El botón “-” funciona sólo para TV. Se utiliza para seleccionar MMS (multicanal) para un TV. 4 VOL / VOL : Pulse para aumentar o reducir el volumen.
Conexiones ¦¦ Conexión de antenas de VHF y UHF Si su antena tiene un conjunto de cables con este aspecto, consulte ‘Antenas de par de cables planos de 300 Ω’ a continuación. Si la antena tiene un cable como el que se muestra en el diagrama de la derecha, consulte “Antenas con cables coaxiales de 75 ohmios”. Si dispone de dos antenas, consulte ‘Antenas de VHF y UHF independientes’. Antenas de par de cables planos de 300 Ω 1. 2.
¦¦ Conexión de TV por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. ANT IN TV por cable sin decodificador Conecte el cable de entrada en el terminal de la antena ANT IN de la parte posterior del TV. NN Dado que el TV está preparado para la televisión por cable, no se necesita un decodificador para ver canales de cable no codificados. Conexión al decodificador que decodifica todos los canales 1. 2. Busque el cable conectado al terminal ANT OUT del decodificador.
¦¦ Conexión de un reproductor de DVD o receptores de televisión por cable / satélite (decodificadores) a través de HDMI Solo es aplicable si hay un conector de salida de HDMI en el dispositivo externo.
¦¦ Conexión de un reproductor de DVD o receptores de televisión por cable / satélite (decodificadores) a través de DVI Solo es aplicable si hay un conector de salida de DVI en el dispositivo externo.
¦¦ Conexión de un sistema de audio digital Los terminales del panel posterior del televisor facilitan la conexión de un sistema de audio digital (Home Cinema/receptor) al televisor.
Uso del cable DVI Panel posterior del TV HDMI/PC /DVI-D AUDIO IN DVI-D IN PC PC IN HDMI/PC /DVI-D AUDIO IN DVI-D IN ANT IN PC IN ANT IN HDMI IN DIGITAL AUDIO OUT (OPTICAL) HDMI IN SERVICE - AUDIO - L AV IN R DIGITAL AUDIO OUT (OPTICAL) R SERVICE 1 Cable de DVI (No incluido) - AUDIO - L AV IN VIDEO VIDEO 2 Cable estéreo (No incluido) NN Cuando conecte una PC, debe hacer coincidir los colores del terminal de conexión y del cable.
Funcionamiento ¦¦ Encendido o apagado del TV Pulse el botón POWER P del mando a distancia. También puede usar el botón P del televisor. ¦¦ Función Plug & Play Cuando se enciende el televisor por primera vez, se configuran seguidos y automáticamente dos ajustes básicos del usuario. Plug & Play 1. Pulse el botón POWER P del mando a distancia. Select Language of the OSD. NN También puede usar el botón P del televisor. Language : English r 2.
1. Pulse el botón MENU para ver el menú. Pulse el botón ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón E. 2. Pulse de nuevo el botón E para seleccionar Plug & Play. NN La función Plug & Play está disponible sólo en el modo TV. CONTrOL dE LOS CANALES ¦¦ Configuración del menú de canales Antes de empezar a memorizar los canales disponibles, debe indicar el tipo de origen de la señal conectada al TV (es decir, antena o sistema de cable). TT Pulse el botón TOOLS para ver el menú Tools.
¦¦ Gestión de los canales Todos los canales Muestra todos los canales disponibles actualmente. Canales agregados Con este menú puede agregar y borrar los canales o configurarlos como favoritos y usar la guía de programas de las emisoras digitales. Canales agregados Muestra todos los canales añadidos. 2 Aire 4 Aire 4-2 ♥ TV #8 8 Aire 13 Aire 13-1 ♥ TV #3 Alice’s Adventures in Wonderland Aire Zoom Selección T Herramientas Favoritos Muestra todos los canales favoritos.
TT Pulse el botón TOOLS para ver el menú Herramientas. También puede añadir (o borrar) canales favoritos seleccionando Herramientas → Agregar a Favoritos (o Borrar de Favoritos). NN Se mostrará el símbolo ♥ y el canal se configurará como favorito. NN Todos los canales favoritos se mostrarán en el menú Favoritos. Visualización con temporizador Si reserva un programa que desea ver, el canal se cambia automáticamente al canal reservado en la lista de canales aunque esté viendo otro canal.
Control de la imagen ¦¦ Control de la imagen(TV / AV / Componente / HDMI ) Puede seleccionar el tipo de imagen que mejor cumpla sus requisitos de visualización. Imagen ❑❑ Modo Dinámico Selecciona la visualización con una definición mejorada, en una habitación luminosa. Normal Selecciona la visualización óptima de la imagen, en un entorno normal.
●● 4:3 : Establece la imagen en modo normal 4:3. ●● Ajuste a pantalla: Use esta función para ver toda la imagen sin cortes cuando se reciban señales de HDMI (720p/1080i/1080p), Componente (1080i/1080p) o DTV (1080i). 16:9 16:9 Zoom1 U Mover Zoom2 U Mover Zoom1 Zoom2 Ajuste ancho U Mover 4:3 Ajuste ancho 4:3 Ajuste a pantalla Ajuste a pantalla NN Puede producirse una retención temporal de imagen cuando se ve una imagen estática durante más de dos horas.
¦¦ Uso del televisor como una pantalla de ordenador (PC) NN Cuando el sistema operativo solicite los datos del controlador del monitor, inserte el CD que se incluye con este producto. Para obtener detalles, consulte la Guía del usuario en el CD. Instalación del software en el equipo (según Windows XP) 1. 2. 3. 4. A continuación se muestra la configuración de pantalla de Windows para un ordenador típico.
¦¦ Ajuste del televisor con el ordenador NN Preselección: Pulse el botón SOURCE para seleccionar el modo PC. ❑❑ MagicBright : Ocio / Internet / Texto / Contraste dinám. / Personal. Imagen MagicBright es una función que proporciona un entorno de visualización óptimo, dependiendo del contenido de la imagen que se esté viendo. En la actualidad hay cinco modos disponibles: Ocio, Internet , Texto, Contraste dinám. y Personal. Cada modo dispone de su propio brillo configurado previamente.
O Alternativo, pulse el botón P.SIZE del mando a distancia de forma repetida para seleccionar uno de los ajustes de tamaño de imagen. NN 16:9 : Establece la imagen en modo panorámico 16:9. NN 4:3 : Establece la imagen en modo normal 4:3. ❑❑ Reinicio de la imagen → Reinic. modo imagen / Cancelar Restablece todos los ajustes predeterminados. NN Reinic. modo imagen: Los valores de la imagen actual regresan a los predeterminados.
Control de Sonido ¦¦ Configuración del menú de sonido Puede seleccionar un modo de sonido que se adapte a sus preferencias personales. Sonido ❑❑ Modo → Normal / música / Cine / Voz clara / Favorito ❑❑ Ecualizador Es posible ajustar los parámetros del sonido según sus preferencias personales. Modo Selecciona el modo de sonido entre los valores predefinidos. Modo : Favorito ► Ecualizador Trusurround SRS HD : Apagado Idioma preferido : Inglés Sonido Multi-track : Mono Vol.
Altavoz externo: Utiliza los altavoces externos (Home Cinema) para la salida del sonido. Altavoz de TV: Utiliza los altavoces del TV para la salida del sonido. NN Si selecciona Altavoz externo en el menú Seleccionar altavoz, se limita la configuración del sonido. NN Los botones de volumen y MUTE no funcionan si Seleccionar altavoz está establecido en Altavoz externo. Configure el volumen del sistema Home Cinema.
●● Zona Tiempo Seleccione la zona horaria. NN Esta función sólo está disponible si Modo Reloj está configurado como Auto. ●● Horario de Verano (Horario de verano) → Apagado/Encendido/Auto Activa o desactiva la función del horario de verano. NN Esta función sólo está disponible si Modo Reloj está configurado como Auto. Temporizador El temporizador de desconexión apaga automáticamente el televisor después de un período prefijado (30, 60, 90, 120, 150 y 180 minutos).
❑❑ V-Chip La función V-Chip bloquea automáticamente la programación que se considera inadecuada para los niños. El usuario debe escribir un número PIN (número de identificación personal) antes de establecer o cambiar las restricciones de V-Chip. NN La función V-Chip no está disponible en los modos HDMI, Componente o PC. NN El código PIN predeterminado para un televisor nuevo es ‘0-0-0-0’.
●● 14+: La programación contiene temas y contenidos que puede que no sean adecuados para menores de 14 años. ●● 18+: Programación para adultos. NN El V-Chip bloqueará automáticamente cualquier categoría que sea ‘More restrictive’. Por ejemplo, si bloquea la categoría G, también se bloquearán automáticamente PG, 14+ y 18+. Francés Canadiense ●● G: General ●● 8 ans+: Programación generalmente considerada aceptable para niños mayores de 8 años sin acompañamiento de adultos.
Cómo reiniciar el televisor cuando el V-Chip bloquea un canal (Escape de emergencia) 1. Clasificación recibida : TV-14/NL Si el televisor sintoniza un canal restringido, el V-Chip lo bloqueará. La pantalla quedará en blanco y aparecerá el Canal bloqueado por el Control Paterno. Introduzca PIN para siguiente mensaje: desbloquear. Escriba el código PIN, pulse el botón E y ▲ o ▼ para desactivar temporalmente el bloqueo V-Chip.
❑❑ Efecto de luz → Apagado / Encendido Puede encender o apagar el LED del frontal del monitor según la situación. Utilice esta función para ahorrar energía o cuando el LED le deslumbre. ❑❑ Nivel de luz Use esta función para ajustar el nivel de luz (el brillo de la luz). ❑❑ Melodía → Apagado/Bajo/Medio/Alto Puede definirse un sonido de melodía para que suene cuando se encienda o se apague el TV. NN La melodía no se reproduce.
¦¦ Configuración del menú de ayuda ❑❑ Autodiagnóstico Soporte técnico Prueba de imagen Si cree que tiene un problema con la imagen, efectúe la prueba de imagen. Compruebe el patrón del color en la pantalla para Autodiagnóstico ► ver si persiste el problema. Actualización del software ●● Sí: Si no se muestra el patrón de prueba o hay ruido en el Guía de conexión HD patrón de prueba, seleccione Sí. Puede haber un problema Contacto con Samsung en el televisor.
NN No desconecte la alimentación ni retire la unidad USB mientras se aplican las actualizaciones. El televisor se apagará y se encenderá automáticamente después de completar la actualización del firmware. Después de realizar la actualización compruebe la versión del firmware. Cuando se actualiza el software, la configuración del vídeo y audio que se haya efectuado vuelve a la configuración predeterminada (de fábrica).
Para conectar al sistema Home Cinema TV DIGITAL AUDIO OUT (OPTICAL) HDMI IN Home Cinema Cable óptico 1. 2. Cable HDMI 1.3 Dispositivo Anynet+ Cable HDMI 1.3 Conecte los terminales HDMI IN del televisor y el terminal HDMI OUT del dispositivo Anynet+ correspondiente mediante un cable HDMI. Conecte el terminal HDMI IN del sistema Home Cinema y el terminal HDMI OUT del dispositivo Anynet+ correspondiente mediante un cable HDMI.
¦¦ Configuración de Anynet+ ❑❑ Configuración Anynet+ (HDMI-CEC) → Apagado/Encendido Para usar la función Anynet+, Anynet+ (HDMI-CEC) debe estar activado. NN Cuando la función Anynet+ (HDMI-CEC) está desactivada, todas las operaciones relacionadas con Anynet+ se desactivan.
Menú Anynet+ El menú Anynet+ cambia según el tipo y el estado de los dispositivos Anynet+ conectados al televisor. Menú Anynet+ Ver TV Lista Disp. Descripción El modo Anynet+ cambia al modo de emisión de TV. Muestra la lista de dispositivos de Anynet+. Muestra los menús del dispositivo conectado. Por ejemplo, si se ha (nombre_dispositivo) Menú conectado un grabador de DVD, se muestra el menú del disco del grabador de DVD.
¦¦ Solución de problemas de Anynet+ Problema Anynet+ no funciona. Deseo iniciar Anynet+. Deseo salir de Anynet+. En la pantalla aparece el mensaje Connecting to Anynet+ device... El dispositivo Anynet+ no funciona. El dispositivo conectado no se muestra. Posible Solución ●● Compruebe si el dispositivo es un dispositivo Anynet+. El sistema Anynet+ sólo admite dispositivos Anynet+. ●● Conecte sólo un receptor (sistema Home Cinema).
Apéndice ¦¦ Identificación de problemas Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones.Si ninguno de los consejos funciona, póngase en contacto con el centro de atención al cliente de Samsung o llame al 1-800-SAMSUNG (726-7864). Problema Posible Solución Imagen deficiente. Intente sintonizar otro canal. /Ajuste la antena. / Compruebe todas las conexiones de cable. Calidad de sonido deficiente. Intente sintonizar otro canal. /Ajuste la antena.
Problema Posible Solución Los subtítulos para sordos no funcionan. Cuando se usa un decodificador de cable o satélite, la opción de los subtítulos para sordos se debe configurar en el decodificador, no en el televisor. Las imágenes se ven con nieve. Quizás se necesite actualizar el firmware. Póngase en contacto con el proveedor de cable. Se ven imágenes superpuestas. Quizás haya problemas de compatibilidad con el decodificador de cable. Intente conectarse a través de los cables de los componentes.
¦¦ Especificaciones del equipo de montaje en la pared (VESA) P2570HD :100 mm P2370HD :75 mm Instale el montaje mural en una pared sólida, perpendicular P2370HD :75 mm al suelo. Para colocarlo en otros materiales de construcción, P2570HD :100 mm póngase en contacto con el distribuidor más cercano. Si se instala en el techo o en una pared inclinada, puede caerse y causar graves lesiones personales.
¦¦ Especificaciones Nombre del modelo P2370HD P2570HD Tamaño de pantalla Diagonal 23 pulg (58 cm) 24,6 pulg (62 cm) Área de visualización 509,76 mm(H) x 286,74 mm(V) 543,46 mm (H) X 305,69 mm (V) Separación entre píxeles 0,2655 mm(H) x 0,2655 mm(V) 0,283 mm (H) X 0,283 mm (V) Color de la pantalla Reloj de píxeles máximo Alimentación eléctrica 16,7M 148,500 MHz (Analógica, Digital) AC 100 - 240 V~ (+/- 10 %).
Bu sayfa bilerek boş bırakılmıştır.
Bu sayfa bilerek boş bırakılmıştır.
Bu sayfa bilerek boş bırakılmıştır.