User Manual S*A33* The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. The contents of this manual are subject to change without notice to improve quality. © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than that of Samsung are owned by their respective owners.
Table of contents Before Using the Product Safety Precautions Electricity and Safety Installation Operation 4 4 5 6 Cleaning 7 Correct posture to use the product 8 Preparations Installation Attaching the Stand Removing the Stand Precautions for moving the product Checking the space around the product Adjusting the Product Tilt Anti-theft Lock Wall Mount Kit Specifications (VESA) 9 9 10 11 11 12 12 13 Control Panel 14 Direct Key guide 15 Connecting and Using a Source Device Menu Read below befo
Table of contents Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Product diagnosis (Screen issue) Checking the Resolution and Frequency Check the following.
Chapter 01 Before Using the Product Safety Precautions Electricity and Safety Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed. Warning •• Do not use a damaged power cord or plug, or a loose power socket. •• Do not use multiple products with a single power socket. •• Do not touch the power plug with wet hands. •• Insert the power plug all the way in so it is not loose.
Installation Caution •• Do not drop the product while moving. Warning •• Do not set down the product on its front. •• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding. •• Keep the plastic packaging out of the reach of children. ‒‒ Children may suffocate.
Operation Warning •• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒‒ Contact Samsung Customer Service Center for repairs. •• To move the product, first disconnect all the cables from it, including the power cable. •• Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, matches, etc) into the product (via the vent or input/output ports, etc).
Caution •• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒‒ Set the screen to power-saving mode or moving-picture screen saver when not using the product for an extended period of time. •• Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc). ‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Correct posture to use the product Use the product in the correct posture as follows: •• Straighten your back. •• Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. •• Keep your eyes directly in front of the screen. •• Adjust the angle so light does not reflect on the screen. •• Keep your forearms perpendicular to your upper arms and level with the back of your hands. •• Keep your elbows at about a right angle.
Chapter 02 Preparations Installation Attaching the Stand ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. 1 Put the stand base onto the stand neck as the direction shown in the figure. 2 Check that the stand neck is firmly connected.
Removing the Stand ――Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. ――The exterior may differ depending on the product. 1 Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. 2 Push the hook in the direction shown in the figure and then pull the stand base to detach the stand as shown in the figure.
10 cm (3.93 Inches) 10 cm (3.93 Inches) Precautions for moving the product Checking the space around the product 10 cm (3.93 Inches) 10 cm (3.93 Inches) Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the 10 cm diagram when installing the product. (3.93 Inches) ――The exterior may differ depending on the product. 10 cm (3.93 Inches) 10 cm (3.
Adjusting the Product Tilt Anti-theft Lock ――The color and shape of parts may differ from what is shown. Specifications are subject to change without ――An anti-theft lock allows you to use the product securely even in public places. notice to improve quality. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. -5.0° (±2.0°) ~ +21.0° (±2.
Wall Mount Kit Specifications (VESA) ――Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
Control Panel Parts Description JOG Button ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Power LED This LED is power status indicator. ――You can select the power LED operation to be enabled or disabled on the menu screen.( JOG Button UP RIGHT LEFT Multi directional button that helps navigate.
Direct Key guide ――On the Direct Key Guide screen, the following menu options appear when the product screen is switched on or the input source is changed. Brightness Auto Adjustment Features Eye Saver Mode Off •• UP/DOWN: Adjust Brightness, Contrast, Sharpness. •• LEFT/RIGHT: Adjust Auto Adjustment. ――Changing the resolution in Display Properties will activate the Auto Adjustment function. ――This function is only available in Analog mode. •• PRESS(ENTER): Display Function Key Guide.
Chapter 03 Connecting and Using a Source Device Read below before connecting the product. Ports 1 Before installing the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. ――The functions available may vary depending on the product model.
Connecting and Using a PC Select a connection method suitable for your PC. Connection Using the HDMI-DVI Cable HDMI Connection Using the D-SUB Cable (Analog Type) PC ――The optimum resolution may not be available with an HDMI-DVI cable. Connecting the Power Connection Using the HDMI Cable HDMI ――When connecting an HDMI cable, use the cable that came with the components of the product. If you use an HDMI cable other than provided by Samsung, the image quality may be degraded.
Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on information message and change the resolution on your PC to the optimum setting. ――If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again. ――If you want to set the optimum resolution for your computer.
Chapter 04 Menu Function Key Guide → ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Picture 2nd SAMSUNG MAGIC Bright 3rd Description This menu provides an optimum picture quality suitable for the environment where the product will be used. ――This menu is not available when Eco Saving Plus is enabled.
2nd 3rd Description In AV mode SAMSUNG When the external input is connected through HDMI PC/AV Mode is set to AV, MAGIC Bright has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom. You can select Custom which automatically recalls your personalized picture settings. •• Dynamic: Select this mode to view a sharper image than in Standard mode.
2nd Color 3rd Description Adjust the tint of the screen. •• Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color. •• Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color. •• Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color. •• Color Tone: Select a color tone that best suits your viewing needs. •• Gamma: Adjust the middle level of luminance.
2nd Picture Size 3rd Description Change the picture size. In PC mode •• Auto / Wide In AV mode •• 4:3 / 16:9 / Screen Fit ――The function may not be supported depending on the ports provided with the product. ――Changing the Picture Size is available when the following conditions are satisfied. ――A digital output device is connected using the HDMI cable. ――The input signal is 480p, 576p, 720p, or 1080p and product can display normally (Not every model can support all of these signals.).
OnScreen Display 2nd 3rd Description Transparency Set the transparency for the menu windows. Position •• H-Position: Move the menu position to the left or right. Language •• V-Position: Move the menu position up or down. Set the menu language. ――A change to the language setting will only be applied to the onscreen menu display. Display Time Set how long the menu window will remain on screen for when it is not in use.
System 2nd Self Diagnosis 3rd Description Perform this test when you experience a problem with your monitor's picture. ――Never turn off the power nor change the input source during self diagnosis. If possible, try not to interrupt testing. Eco Saving Plus Reduce energy consumption compared to consumption at the maximum brightness level. •• Off: Deactivate the Eco Saving Plus function. •• Auto: The power consumption will automatically be reduced by about 10% over the current setting.
2nd 3rd Description Source Detection Select either Auto or Manual as the method to recognize input source. Key Repeat Time Control the response rate of a button when the button is pressed. Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed. Power LED On Configure the settings to enable or disable the power LED located at the lower part of the product. •• Working: The power LED is on when the product is turned on.
Information 2nd Information 3rd Description View the current software information. Refer to the actual monitor screen.
Chapter 05 Installing the Software Easy Setting Box Driver Installation To install the latest version of the product driver, download it from the Samsung website (http://www. samsung.com). ――You can set the optimum resolution and frequency for this product by installing the corresponding drivers. Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box, download it from the Samsung website (http://www. samsung.com).
Chapter 06 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center ――Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check the following. Installation issue The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
The message Check Signal Cable appears. There is no image on the screen and the power LED blinks every 0.5 to 1 second. Check that the cable is properly connected to the product. The product is operating in power-saving mode. Check that the device connected to the product is powered on. Press any key on the keyboard or move the mouse to return to normal operating mode. Check the PC/AV Mode status. ( Text is blurry. → System → PC/AV Mode → HDMI: PC or AV.) Not Optimum Mode is displayed.
Q&A ――Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. •• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Screen Refresh Rate under Monitor settings. •• Windows 8(Windows 8.
Chapter 07 Specifications General Model Name S19A330NH*/S19A332NH*/S19A334NH*/S19A336NH*/S19A338NH* S22A330NH*/S22A332NH*/S22A334NH*/S22A336NH*/S22A338NH* Size 19 Class (18.5 Inches / 47.0 cm) 22 Class (21.5 Inches / 54.5 cm) Display area 409.8 mm (H) x 230.4 mm (V) 478.656 mm (H) x 260.28 mm (V) Pixel Pitch 0.3 mm (H) x 0.3 mm (V) 0.2493 mm (H) x 0.241 mm (V) Maximum Pixel Clock 85.5 MHz 148.5 MHz Power Supply AC 100 - 240 V~, 50/60 Hz Based on the AC voltage of the adapter.
Standard Signal Mode Table S19A330NH*/S19A332NH*/S19A334NH*/S19A336NH*/ S19A338NH* Model Name Synchronization (PANEL Spec) Resolution S22A330NH*/S22A332NH*/S22A334NH*/S22A336NH*/ S22A338NH* Horizontal Frequency 30 – 81 kHz 30 – 81 kHz Vertical Frequency 56 – 75 Hz (VGA) 56 – 75 Hz (VGA) 50 – 75 Hz (HDMI) 50 – 75 Hz (HDMI) Optimum Resolution 1366x 768 @ 60 Hz 1920 x 1080 @ 60 Hz Maximum Resolution 1366x 768 @ 60 Hz 1920 x 1080 @ 60 Hz If a signal that belongs to the following standard signa
S22A33* Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ VESA, 640 x 480 31.469 59.940 25.175 -/- MAC, 640 x 480 35.000 66.667 30.240 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.
Chapter 08 Appendix Responsibility for the Pay Service (Cost to Customers) A Product damage caused by customer's fault ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician •• External impact or drop. in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
