User Manual S22F350FH* S22F352FH* S22F354FH* S24F350FH* S24F352FH* S24F354FH* S24F356FH* S24F359FH* S27F350FH* S27F352FH* S27F354FH* S27F358FW* S27F359FH* S32F351FU* The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. The contents of this manual are subject to change without notice to improve quality. © Samsung Electronics Samsung Electronics owns the copyright for this manual.
Table of contents Before Using the Product Securing the Installation Space Precautions for storage 4 4 Safety Precautions Symbols Cleaning Electricity and Safety Installation Operation 4 4 5 5 6 7 Preparations Parts Control Panel Direct Key guide Function Key Guide Changing Brightness, Contrast and Sharpness settings Reverse Side Adjusting the Product Tilt Anti-theft Lock Installing a Wall-mount Kit or Desktop Stand (S22F350FH*/S22F352FH*/S22F354FH*/ S24F350FH*/S24F352FH*/S24F354FH*/ S24F356FH*/S24F359F
Table of contents Adjusting OSD (On Screen Display) settings Installing the Software Easy Setting Box Transparency 32 Position 32 Language 32 Display Time 32 Setup and Reset FreeSync (S24F350FH*/S24F352FH*/ S24F354FH*/S24F356FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/ S27F358FW*/S27F359FH*) 33 Eco Saving Plus 35 Off Timer 35 PC/AV Mode 35 Source Detection 35 Key Repeat Time 35 Power LED On 36 Reset All 36 Information 36 37 Troubleshooting Guide Requirements Before Contacti
Chapter 01 Before Using the Product Securing the Installation Space Precautions for storage Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ――The exterior may differ depending on the product. ――Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.
Cleaning ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ――Take the following steps when cleaning. Electricity and Safety Warning 1 Power off the product and computer. •• Do not use a damaged power cord or plug, or a loose power socket. 2 Disconnect the power cord from the product. •• Do not use multiple products with a single power socket. ――Hold the power cable by the plug and do not touch the cable with wet hands.
Installation Warning Caution •• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• Do not drop the product while moving. •• Do not install the product in poorly ventilated spaces such as a bookcase or closet. •• Install the product at least 10 cm away from the wall to allow ventilation. •• Keep the plastic packaging out of the reach of children. ‒‒ Children may suffocate.
Operation Warning •• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒‒ Contact Samsung Customer Service Center for repairs. •• To move the product, first disconnect all the cables from it, including the power cable. •• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Center. •• Do not let children hang from the product or climb on top of it.
Caution •• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. •• Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc). ‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Chapter 02 Preparations Parts Icons Description JOG Button Multi directional button that helps navigate. ――The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ――The color and shape of parts may differ from what is shown. Specifications are subject to change without •• Power On (Power button): Off notice to improve quality.
Direct Key guide ――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ――The function buttons page shows if Eye Saver Mode is enabled.
Function Key Guide ――To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied. Return Icons Description Selects to change the input signal by moving the JOG button in the Function Key Guide screen.
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. Changing Brightness, Contrast and Sharpness settings JOG Button You can adjust Brightness, Contrast or Sharpness by moving the JOG button up or down, if no OSD menu is displayed. Power saving/Non-signal mode UP Source Change Sharpness Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below.
Reverse Side ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/ S24F352FH*/S24F354FH*/S24F359FH*/S27F350FH*/ S27F352FH*/S27F354FH*/S27F359FH* Port S24F356FH* Description S27F358FW* Port S32F351FU* Description Connects to a source device using an HDMI cable or HDMI-DVI cable. Connects to a PC using a DP cable. Connect to a PC using the D-SUB cable.
Adjusting the Product Tilt Anti-theft Lock ――The color and shape of parts may differ from what is shown. Specifications are subject to change without ――An anti-theft lock allows you to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided notice to improve quality. S22F350FH*/S22F352FH*/ S22F354FH*/S24F350FH*/ S24F352FH*/S24F354FH*/ S24F359FH*/S27F350FH*/ S27F352FH*/S27F354FH*/ S27F359FH* -1.0° (±1.
Installing a Wall-mount Kit or Desktop Stand (S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/ S24F352FH*/S24F354FH*/S24F356FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/S27F358FW*/ S27F359FH*) ――Power the product off and remove the power cable from the power socket. 1 2 •• Notes ‒‒ Using a screw longer than the standard length can damage the internal components of the product.
S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/S24F354FH*/S24F356FH*/S24F359FH*/S27F350FH*/S27F352FH*/S27F354FH*/S27F358FW*/S27F359FH* I f either side of the bracket to purchase P0 or P1 is longer than 94.0 mm, the bracket will interfere with the Stand Hinge Part. If this is the case, the wall mount should not be used. 75.0 mm 75.0 mm Refer to the area P0=94.0 mm P1=94.0 mm Stand Hinge Part in the image ――The dimensions of this model required by VESA are 75.0 x 75.0 mm.
Installing a Wall-mount Kit or Desktop Stand (S32F351FU*) ――Power the product off and remove the power cable from the power socket. 1 2 A •• Notes ‒‒ Using a screw longer than the standard length can damage the internal components of the product. ‒‒ The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. ‒‒ Do not use screws that do not comply with the VESA standards.
S32F351FU* If either side of the bracket to purchase P0 or P1 is longer than 115.0 mm, the bracket will interfere with the Stand Hinge Part. If this is the case, the wall mount should not be used. 75.0 mm 75.0 mm Refer to the area P0=115.0 mm P1=115.0 mm Stand Hinge Part in the image ――The dimensions of this model required by VESA are 75.0 x 75.0 mm. Please purchase the wall-mount tailored to the dimensions of 75.0 x 75.0 mm. ――If you use a wall-mount used for the dimensions of both 100.0 x 100.
Installation Attaching the Stand (S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/S24F354FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/S27F359FH*/S32F351FU*) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. 1 Insert the stand neck into the stand base in the direction shown in the figure. - Caution Do not hold the product upside down only by the stand.
Removing the Stand (S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/S24F354FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/S27F359FH*/S32F351FU*) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. 1 Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards.
Attaching the Stand (S24F356FH*/S27F358FW*) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. Insert the stand neck into the stand base in the direction shown in the figure. Check that the stand neck is firmly connected. Tightly fasten the connecting screw at the bottom of the stand base. 3 - Caution Do not hold the product upside down only by the stand.
Removing the Stand (S24F356FH*/S27F358FW*) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. 1 Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. - Caution Do not hold the product upside down only by the stand.
Chapter 03 Connecting and Using a Source Device Pre-connection Checkpoints Connecting and Using a PC ――Before connecting a source device, read the user manual provided with it. Select a connection method suitable for your PC. The number and locations of ports on source devices may differ from device to device. ――Do not connect the power cable before connecting all other cables. ――Connecting parts may differ in different products. ――Provided ports may vary depending on the product.
Connection Using the HDMI or HDMI-DVI Cable S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/ S24F354FH*/S24F359FH*/S27F350FH*/S27F352FH*/S27F354FH*/S27F359FH* Connection Using an DP Cable S27F358FW* DP IN ――A DP cable shorter under 1.5m in length is recommended. Using a cable longer than 1.
Connecting the Power S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/ S24F354FH*/S24F359FH*/S27F350FH*/S27F352FH*/S27F354FH*/S27F359FH* 1 2 3 S24F356FH* S27F358FW* S32F351FU* 1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 14V port on the back of the product. 2 Next, connect the power cable to the power outlet. 3 Press the JOG button on the back of the monitor to turn it on. ――The input voltage is switched automatically.
Correct posture to use the product Driver Installation ――You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ――To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Chapter 04 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. The functions available on the monitor may vary depending on the model. Refer to the actual product. SAMSUNG MAGIC Bright In PC mode This menu provides an optimum picture quality suitable for the environment where the product will be used. •• Standard: Obtain a picture quality suitable for editing documents or using Internet.
Brightness Color You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. A higher value will make the picture appear brighter. ――This menu is not available when SAMSUNG Bright is set to Cinema or Dynamic Contrast mode. ――This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled. ――This menu is not available when Eco Saving Plus is enabled.
SAMSUNG MAGIC Angle (S22F350FH*/ S22F352FH*/S22F354FH*) SAMSUNG MAGIC Upscale MAGICUpscale SAMSUNG MAGICAngle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle. SAMSUNG ――This menu is not available when SAMSUNG Bright is set to Cinema or Dynamic Contrast mode. MAGIC MAGIC ――This menu is not available when Game Mode is enabled. ――Comparing with Mode1, Mode2 has a stronger effect. You can customize the angle to suit your preferences.
Eye Saver Mode Picture Size Set to an optimum picture quality suitable for eye relaxation. Change the picture size. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation.
Screen Adjustment ――This menu is available in Analog mode only. ――This menu is only available when Picture Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels. Configuring H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. Configuring Coarse Adjust the screen frequency.
Chapter 05 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. The functions available on the monitor may vary depending on the model. Refer to the actual product. Transparency Position Set the transparency for the menu windows. Adjust the menu position. OnScreen Display Transparency 한국어 On Configure the transparency of the menu windows. Position Language Display Time English Language Set the menu language.
Chapter 06 Setup and Reset A detailed description of each function is provided. Refer to your product for details. The functions available on the monitor may vary depending on the model. Refer to the actual product. FreeSync (S24F350FH*/S24F352FH*/ S24F354FH*/S24F356FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/ S27F358FW*/S27F359FH*) FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play.
The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards: Make sure to install the latest official graphics drivers from AMD that support FreeSync. ――For additional AMD graphics card models that support the FreeSync feature, visit the official AMD website. ――Select FreeSync Off if you are using a graphics card from a different manufacturer.
Eco Saving Plus PC/AV Mode The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel. Set PC/AV Mode to AV. The picture size will be enlarged. ――This option is not available when SAMSUNG Bright is in Dynamic Contrast mode. MAGIC ――This menu is not available when Game Mode is enabled. ――This menu is not available when Eye Saver Mode is enabled. •• Off: Deactivate the Eco Saving Plus function.
Power LED On Information Configure the settings to enable or disable the power LED located at the lower part of the product. View the current input source, frequency and resolution. •• Working: The power LED is on when the product is turned on. •• Stand-by: The power LED is on when the product is turned off. Picture OnScreen Display Reset All System Information Return all the settings for the product to the default factory settings.
Chapter 07 Installing the Software Easy Setting Box System Requirements OS Hardware •• Windows XP 32Bit/64Bit •• At least 32MB of memory •• Windows Vista 32Bit/64Bit •• At least 60MB of free space on the hard disk drive •• Windows 7 32Bit/64Bit Easy Setting Box enables users to use the monitor by partitioning multiple sections. •• Windows 8 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at http://www.samsung.com. •• Windows 8.
Chapter 08 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center ――Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check the following. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product. Playback of high-definition large video files can be choppy. This may be because the video player is not optimized for the computer resource. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (P.42). Try playing the file on another video player.
Q&A ――Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. •• Windows XP: Go to Control Panel Appearance and Themes •• Windows ME/2000: Go to Control Panel •• Windows Vista: Go to Control Panel •• Windows 7: Go to Control Panel Settings Appearance and Personalization System Control Panel Display Settings Advanced Appearance and Personalization •• Windows 8(Windows 8.
Chapter 09 Specifications General Model Name S22F350FH*/S22F352FH*/S22F354FH* S24F350FH*/S24F352FH*/S24F354FH*/ S27F350FH*/S27F352FH*/S27F354FH*/ S32F351FU* S24F356FH*/S24F359FH* S27F358FW*/S27F359FH* Size 22 Class (21.5 Inches / 54.6 cm) 24 Class (23.5 Inches / 59.8 cm) 27 Class (27.0 Inches / 68.6 cm) 32 Class (31.5 Inches / 80.1 cm) Display area 476.64 mm (H) x 268.11 mm (V) 521.28 mm (H) x 293.22 mm (V) 597.9 mm (H) x 336.3 mm (V) 698.40 mm (H) x 392.85 mm (V) 18.8 Inches (H) x 10.
Standard Signal Mode Table Model Name Synchronization Resolution S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/ S24F352FH*/S24F354FH*/S24F356FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/S27F358FW*/ S27F359FH* S32F351FU* Horizontal Frequency 30 – 81 kHz 30 – 81 kHz Vertical Frequency 56 – 75 Hz 56 – 61 Hz Optimum Resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz Maximum Resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz If a signal that belongs to the following standard signal modes is tr
S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/S24F354FH*/S24F356FH*/S24F359FH*/S27F350FH*/S27F352FH*/S27F354FH*/S27F358FW*/S27F359FH* Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA DMT, 1280 x 800 49.702 59.810 83.500 -/+ VESA DMT, 1280 x 1024 63.981 60.020 108.000 +/+ VESA DMT, 1280 x 1024 79.976 75.025 135.000 +/+ VESA DMT, 1440 x 900 55.935 59.887 106.500 -/+ VESA DMT, 1600 x 900 60.000 60.000 108.
Chapter 10 Appendix Responsibility for the Pay Service (Cost to Customers) A Product damage caused by customer's fault ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician •• External impact or drop. in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.