User Manual

Specifications

10 Specifications

10.2 General (S22E310HY / S22E310H)

Plug-and-Play

This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data

exchange between the monitor and PC system optimizes the monitor settings. Monitor installation

takes place automatically. However, you can customize the installation settings if desired.

Panel Dots (Pixels)

Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm)

may be brighter or darker on the LCD panel. This does not affect product performance.

The above specifications are subject to change without notice to improve quality.

This device is a Class B digital apparatus.

Model Name S22E310HY / S22E310H

Panel Size 21.5 Inches (54 cm)

Display area 476.64 mm (H) x 268.11 mm (V)

18.8 Inches (H) x 10.6 Inches (V)

Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V)

0.009774 Inches (H) x 0.009774 Inches (V)

Power Supply AC 100 - 240 V ~ (+/- 10%), 50/60 Hz ± 3 Hz

Refer to the label at the back of the product as the standard

voltage can vary in different countries.

Dimensions

(W x H x D) /

Weight

Without Stand 513.7 x 308.6 x 90.4 mm

20.2 x 12.1 x 3.6

Inches

With Stand 513.7 x 390.5 x 189.7 mm / 3.32 Kg

20.2 x 15.4 x 7.5

Inches /

7.3

lbs

VESA Mounting Interface 75 x 75 mm

3.0 x 3.0 Inches

(For use with Specialty(Arm) Mounting hardware.)

Environmental

considerations

Operating Temperature : 50°F – 104°F (10°C – 40°C)

Humidity : 10% – 80%, non-condensing

Storage Temperature : -4°F – 113°F (-20°C – 45°C)

Humidity : 5% – 95%, non-condensing

(USA only)

Dispose unwanted electronics through an approved recycler.

To find the nearest recycling location, go to our website: