e-cover Page 0 Monday, May 29, 2000 2:04 PM SyncMaster 800TFT TFT-LCD Monitor Owner’s Instructions
e-cover Page i Monday, May 29, 2000 2:04 PM CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Unpacking your Monitor Please make sure the following items are included with your monitor. If any items are missing, contact your dealer.
Français Deutsch Portu- Italiano Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Your Flat Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
sa800e2.fm Page 2 Monday, May 29, 2000 2:09 PM Safety Instructions 1 Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the local electrical supply. 2 Never insert anything metallic into the openings in the cabinet of the flat panel display monitor (FPD). Doing so may create the danger of electric shock. 3 To avoid electric shock, never touch the inside of the FPD. Only a qualified technician should open the FPD’s case.
sa800e2.fm Page 3 Monday, May 29, 2000 2:09 PM Français English Your Flat Panel Monitor 1 Video input selector (A/B) and indicator lights Your Flat Panel Display (FPD) monitor allows you to connect both a workstation and a computer system to it at the same time. Use this button to select which system your FPD should display. Indicator “A” will glow green when a workstation is the active system and indicator “B” will glow green when an alternate computer system is active.
sa800e2.fm Page 4 Monday, May 29, 2000 2:09 PM Your Flat Panel Monitor 1 4 3 5 5 2 6 Figure 2. Back panel connectors 1 Power adapter connector Connect the power adapter jack here. 2 15-pin, mini D-sub signal cable connector Connect a computer system to this connector. 3 13W3 signal cable connector Connect a 13W3 cable (Optional) from the video connector on your workstation to this connector.
sa800e2.fm Page 5 Monday, May 29, 2000 2:09 PM Français English Installation To workstation video port 1 3 4 2 6 Español 5 Figure 3. Connecting your monitor to a PC 1 2 Turn off your system and unplug its power cord. 3 When connecting your FPD to a computer: Connect the supplied signal cable to the 15-pin mini D-sub connector Á on the back of your FPD. Connect the other end of the cable to the video port on the back of your computer.
sa800e2.fm Page 6 Monday, May 29, 2000 2:09 PM Installation Getting Help If your FPD does not display an image, check your cable connections and refer to “Troubleshooting” on page 16. If you experience difficulties with the quality of the displayed image, run auto adjustment again and refer to “Adjusting Your FPD” on page 8 or “Troubleshooting” on page 16. Plug and Play Our adoption of the new VESA® Plug and Play solution eliminates complicated and time consuming setup.
Installation Français Self-Test Feature Check (STFC) Your FPD provides a self test feature which allows you to check if your FPD is functioning properly. If your FPD and computer are properly connected but the FPD screen remains dark and the power indicator is lit, use the following steps to perform the FPD self test: Turn off both your computer and the monitor. Unplug the video cable from the computer or video card. Español 1 2 3 Turn on the monitor.
sa800e2.fm Page 8 Monday, May 29, 2000 2:09 PM Adjusting Your FPD Your flat panel display allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the front of the FPD. While you use these buttons to adjust the controls, an on-screen menu shows you their numeric values as they change. 1 2 3 4 5 6 Figure 5.
Automatic Save Whenever you open the on-screen menu and allow an adjustment window to remain on-screen for about three seconds without pressing another button, this FPD automatically saves any adjustments you have made. These changes are saved into a user area in the FPD. User areas are reserved according to the signal frequency from your computer. This FPD can save adjustments for up to five user modes.
sa800e2.fm Page 10 Monday, May 29, 2000 2:09 PM Adjusting Your FPD Contrast Contrast 16 Ð + Ý EXIT: Exit key Follow these instructions to adjust the contrast between darkness and lightness on the FPD’s display 1 With the menu off, push the “–” ( ) or “+” ( ) button. The contrast display will appear. 2 Push the “+” ( ) button to increase the contrast; push the “–” ( ) button to decrease the contrast.
sa800e2.fm Page 11 Monday, May 29, 2000 2:09 PM English Adjusting Your FPD Menu System Français i Image Lock Fine 29 Español Coarse 1688 Auto Adjustment Access: Menu Key With the menu off, push the MENU button to open the menu system and display the main function menu. 2 Push the “+” ( ) button to move to the next icon or push the “–” ( ) button to move back to the previous icon.
sa800e2.fm Page 12 Monday, May 29, 2000 2:09 PM Adjusting Your FPD Table 1. Menu Adjustments Icon 12 Settings and Sub-menus Description Image Lock: • Fine • Coarse The Fine and Coarse adjustments allow you to more closely adjust your FPD to your preference. Use the “–” ( ) and “+” ( ) buttons to adjust away the interference. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.
sa800e2.fm Page 13 Monday, May 29, 2000 2:09 PM English Adjusting Your FPD Table 1. Menu Adjustments (Continued ) Description Select this icon to return to the factory preset values for the selected group of functions. Resetting the Geometry settings changes the Position settings, Image Lock settings and changes the Image Size to Expand 2. Resetting the Color settings changes the colors back to their original factory settings.
sa800e2.fm Page 14 Monday, May 29, 2000 2:09 PM Adjusting Your FPD Table 1. Menu Adjustments (Continued ) Icon Settings and Sub-menus Display Mode : Select this icon to view the current user mode. This screen only displays information; you cannot select a new setting. Image Effect: • Scaling • Filtering Select this icon to optimize the display for the type of software you are using. Scaling smooths an image which may help the eye to see more detail.
PowerSaver This FPD has a built-in power management system called PowerSaver. This system saves energy by switching your FPD into a low-power mode when it has not been used for a certain amount of time. The available modes are “On”, “Standby”, “Sleep Mode”, and “Deep Sleep Mode” Table 2.
sa800e2.fm Page 16 Monday, May 29, 2000 2:09 PM Adjusting Your FPD Troubleshooting Before calling for service, check the information in this section to see if you can remedy any problems yourself Table 3. Troubleshooting problems Symptom Corrective Actions No Picture • Check to see that both the FPD and the computer are plugged in and turned on.
sa800e2.fm Page 17 Monday, May 29, 2000 2:09 PM English Adjusting Your FPD White does not look white • Adjust the color settings using the OSM COLOR menu. Screen image is not centered or sized properly • Adjust the Horizontal and Vertical position settings using the OSM. • Check the image size selection (see page 13). • Run Auto Adjustment (see page 6). The flat panel display is saving your changes to the OSM.
sa800e2.fm Page 18 Monday, May 29, 2000 2:09 PM Appendix Specifications Table 4. Specifications LCD Panel * Synchronization 46 cm (18.1") Diagonal true active area 0.28 mm Pixel pitch Viewing Angle: 80/80/80/80 (U/D/L/R) (Degrees) Horizontal: Vertical: 30 kHz to 81 kHz 56 Hz to 85 Hz (~XGA) 60 Hz to 76 Hz (SXGA) Display Colors 16.7 Million Colors Maximum Resolution Horizontal: Vertical: Active Display Horizontal: 359.0 ± 3 mm (14.13" ± 0.12”) Vertical: 287.2 ± 3 mm (11.36" ± 0.
sa800e2.fm Page 19 Monday, May 29, 2000 2:09 PM English Appendix Pin Assignments 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Red Green Blue GND GND (DDC Return) GND-R GND-G GND-B NC GND-Sync/Self test GND DDC Data H-Sync V-Sync DDC Clock Red Green Blue GND GND (DDC Return) GND-R GND-G GND-B NC GND-Sync/Self test GND DDC Data H-Sync V-Sync DDC Clock Español Composite H/V Deutsch 15-Pin Side of the Signal Cable Pin No.
sa800e2.fm Page 20 Monday, May 29, 2000 2:09 PM Appendix Display Modes If the signal from the system equals to the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn't equal to the standard signal mode, adjust the mode with referring to the Videocard user guide because the screen might not display or only the power LED might be on. For the display modes listed below, the screen image has been optimized during manufacture. Table 7.
sa800e2.fm Page 21 Monday, May 29, 2000 2:09 PM English Appendix Changing the Stand 1 2 Turn off your monitor and unplug its power cord. 3 Remove the four screws, securing the stand and remove it. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.
sa800e1ix.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If necessary, consult your dealer or an experienced radio/television technician for additional suggestions. You may find the booklet called How to Identify and Resolve Radio/TV Interference Problems helpful. This booklet was prepared by the Federal Communications Commission. It is available from the U.S.
Bk 800TFT(59A 06) Page iv Monday, May 29, 2000 1:31 PM U.S.A. : ESPAÑA : Samsung Electronics America (SEA) One Samsung Place Ledgewood, NJ 07852 Tel. : 1-800-SAMSUNG (1-800-726-7864) Samsung Electrónics Comercial Ibérica, S.A. Ciencies, 55-65 (Polígono Pedrosa) 08908 Hospitalet de Llobregat (Barcelona) Tel. : (93) 261 67 00 Fax. : (93) 261 67 50 CANADA : Samsung Electronics Canada Inc. 7037 Financial Drive Mississauga, Ontario L5N 6R3 Tel. : 1-800-SAMSUNG (1-800-726-7864) Fax.
