BN68-00448A-04Eng_02 10/27/03 9:45 AM Page 3 Y O U R N E W TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player.
venus-02-en 6/28/03 8:14 AM Page 11 I N S TA L L AT I O N Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.
venus-02-en 6/28/03 8:14 AM Page 12 I N S TA L L AT I O N Connecting an S-VHS VCR Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV. 2 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO INPUT jacks on the TV.
venus-02-en 6/28/03 8:15 AM Page 13 I N S TA L L AT I O N Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. 1 Connect a set of audio cables between the L, R AUDIO INPUT jacks on the TV and the AUDIO OUT jacks on the DVD player. 2 Connect a video cable between the COMPONENT1 or COMPONENT2 (Y, Pb, Pr) jacks on the TV and the Y, Pb, Pr jacks on the DVD player. Note: For an explanation of Component video, see your DVD player owner's manual.
venus-02-en 6/28/03 8:15 AM Page 14 I N S TA L L AT I O N Connecting the Speakers 5.1. Channel system: 5 Channels – 2 Channels for the front (left and right), 1 Channel for the center, 2 for the rear (left and right) 0.1 Channel – Subwoofer Channel •Wind the speaker cable on the core twice or more. 1. Place the hooks on the speaker and the TV set. 2. Tighten the screws to secure the hooks. How to Connect 1. Connect the speaker cables to the Speaker OUT jacks on the TV and the IN jacks on the speakers.
venus-02-en 6/28/03 8:15 AM Page 15 I N S TA L L AT I O N Connecting a PC Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. DVI-D TV rear panel PC rear PC VIDEO CABLE ( DVI-D+DVI-D ) PC AUDIO CABLE D-SUB TV rear panel PC rear PC VIDEO CABLE ( DVI + D-SUB) PC AUDIO CABLE • PC AUDIO INPUT Connect these to the audio-output jacks on your PC. • PC VIDEO INPUT Connect to the video output port on your PC.