User Manual
Table Of Contents
- Before Using the Product
- Preparations
- Parts
- Control Panel
- Direct Key guide
- Function Key Guide
- Configuring Eye Saver Mode, Brightness and Contrast from the Initial Screen
- Changing the Volume setting
- Reverse Side
- Adjusting the Product Tilt and Height
- Rotating the Monitor Screen (U32H750UM* / U32H850UM*)
- Rotating the monitor (U32H750UM* / U32H850UM*)
- Anti-theft Lock
- Precautions for moving the monitor
- MagicRotation Auto (U32H750UM* / U32H850UM*)
- Installation
- Parts
- Connecting and Using a Source Device
- Screen Setup
- Configuring the PIP/PBP Settings
- Adjusting OSD (On Screen Display) settings
- Setup and Reset
- Installing the Software
- Troubleshooting Guide
- Specifications
- Appendix
![](/manual/samsung/lu28h750uqnxza/user-manual-catalan-english/images/img-13.png)
13
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for
control source and power could be used as below.
JOG Button Power saving/Non-signal mode
UP
Source Change
Down
PRESS(ENTER) for 2 seconds
Power Off
When the monitor displays the Main menu the JOG Button could be used as below.
JOG Button Action
UP/DOWN
Move the option
LEFT
Exit the Main menu.
Close Sublist without saving value.
Value decreases in the slider.
RIGHT
Move to next depth.
Value increases in the slider.
PRESS(ENTER)
Move to next depth.
Save the value and close Sublist.