User Manual
Table Of Contents
- Before Using the Product
- Preparations
- Parts
- Control Panel
- Direct Key guide
- Function Key Guide
- Configuring Eye Saver Mode, Brightness and Contrast from the Initial Screen
- Changing the Volume setting
- Reverse Side
- Adjusting the Product Tilt and Height
- Rotating the Monitor Screen (U32H750UM* / U32H850UM*)
- Rotating the monitor (U32H750UM* / U32H850UM*)
- Anti-theft Lock
- Precautions for moving the monitor
- MagicRotation Auto (U32H750UM* / U32H850UM*)
- Installation
- Parts
- Connecting and Using a Source Device
- Screen Setup
- Configuring the PIP/PBP Settings
- Adjusting OSD (On Screen Display) settings
- Setup and Reset
- Installing the Software
- Troubleshooting Guide
- Specifications
- Appendix
15
Port Description
POWER IN
Connect the power cord for your monitor to the POWER IN port on
the back of the product.
―
(U32H750UM* / U32H850UM* model only)
1
2
4
3
Connect to a USB device.
―
Super charging is possible using the
1
and
2
ports only.
These ports charge devices faster than typical USB ports. The speed
depends on the connected devices.
―
(U32H750UM* / U32H850UM* model only)
(PC IN)
Connects to a PC using a USB cable. Compatible with a USB cable
version 3.0 or lower.
―
This port can only connect to a PC.
―
(U32H750UM* / U32H850UM* model only)
Reverse Side
―
The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual
product.
Port Description
HDMI IN 1 HDMI IN 2
Connects to a source device using an HDMI cable or HDMI-DVI
cable.
―
HDMI1 support 3840 x 2160 @ 30 Hz
―
HDMI2 support 3840 x 2160 @ 60 Hz
DP IN
Connects to a PC using a DP cable.
Connect to an audio output device such as headphones.
―
The sound could only be heard when using the HDMI to HDMI cable
or DP cable.
MINI DP IN
Connects to a PC using a MINI DP cable.
―
(U32H750UM* / U32H850UM* model only)
DC 19V
Connects to the AC/DC adapter.
―
(U28H750UQ* model only)