User Manual U32J590UQ* U32J592UQ* The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. (For India Only) The contents of this manual are subject to change without notice to improve quality. This product is RoHS compliant. © Samsung Electronics For more information on safe disposal and recycling visit our website www.samsung.
Table of contents Before Using the Product Securing the Installation Space Precautions for storage 4 4 Safety Precautions Cleaning Electricity and Safety Installation Operation 4 5 5 6 7 Preparations Parts 10 Control Panel 10 Direct Key guide 11 Function Key Guide 12 Configuring Eye Saver Mode, Brightness and Contrast from the Initial Screen 14 Changing the Volume setting 14 Types of Ports 15 Adjusting the Product Tilt 16 Anti-theft Lock 16 Precautions for moving the monitor 17 Installing a Wall-mount K
Table of contents Configuring the PIP/PBP Settings Setup and Reset Troubleshooting Guide PIP/PBP Mode 29 FreeSync 34 Size 30 Eco Saving Plus 36 Position 30 Off Timer Plus 36 Sound Source 30 PC/AV Mode 37 Source 31 DisplayPort Ver.
Chapter 01 Before Using the Product Securing the Installation Space Safety Precautions Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ――The exterior may differ depending on the product. Warning A serious or fatal injury may result if instructions are not followed.
Cleaning ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ――Take the following steps when cleaning. Electricity and Safety Warning 1 Power off the product and computer. •• Do not use a damaged power cord or plug, or a loose power socket. 2 Disconnect the power cord from the product. •• Do not use multiple products with a single power socket. ――Hold the power cable by the plug and do not touch the cable with wet hands.
Installation Warning Caution •• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• Do not drop the product while moving. •• Do not install the product in poorly ventilated spaces such as a bookcase or closet. •• Install the product at least 10 cm away from the wall to allow ventilation. •• Keep the plastic packaging out of the reach of children. ‒‒ Children may suffocate.
Operation Warning •• There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒‒ Contact Samsung Customer Service Center for repairs. •• To move the product, first disconnect all the cables from it, including the power cable. •• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Center.
Caution •• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. •• Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc). ‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
•• Do not hold the product upside-down or move it by holding the stand. ‒‒ The product may fall and become damaged or cause an injury. •• Looking at the screen too close for an extended period of time can deteriorate your eyesight. •• Do not use humidifiers or stoves around the product. •• Rest your eyes for more than 5 minutes or look at distance objects for every 1 hour of product use. •• Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Chapter 02 Preparations Parts Icons Description JOG Button Multi directional button that helps navigate. ――The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ――The color and shape of parts may differ from what is shown. Specifications are subject to change without •• Power On (Power button): Off notice to improve quality.
Direct Key guide ――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. Eye Saver Mode Volume Features Eye Saver Mode Off •• UP/DOWN: Adjust Brightness, Contrast, Eye Saver Mode. •• LEFT/RIGHT: Adjust Volume. •• PRESS(ENTER): Display Function Key Guide.
Function Key Guide ――To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied. Return Icons Description Selects to change the input signal by moving the JOG button in the Function Key Guide screen.
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode UP Source Change Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below. JOG Button Action UP/DOWN Move the option Exit the Main menu. LEFT Close Sublist without saving value. Value decreases in the slider. RIGHT PRESS(ENTER) Move to next depth.
Configuring Eye Saver Mode, Brightness and Contrast from the Initial Screen Adjust the Brightness, Contrast and Eye Saver Mode by moving the JOG button. Changing the Volume setting You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed. 50 Volume Mute Contrast Off Eye Saver Mode ――The displayed image may differ depending on the model.
Types of Ports ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. HDMI IN 1 Port HDMI IN 2 DP IN DC 19V Description Connects to a source device using an HDMI cable or HDMI-DVI cable. HDMI IN 1 HDMI IN 2 ――HDMI1 support 3840 x 2160 @ 30 Hz ――HDMI2 support 3840 x 2160 @ 60 Hz DP IN Connects to a PC using a DP cable.
Adjusting the Product Tilt Anti-theft Lock ――The color and shape of parts may differ from what is shown. Specifications are subject to change without ――An anti-theft lock allows you to use the product securely even in public places. notice to improve quality. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
Precautions for moving the monitor •• Do not directly apply pressure on the screen. •• Do not hold the screen when moving the monitor. •• Do not hold the product upside down only by the stand. •• Hold the lower corners or edges of the monitor when moving it.
Installing a Wall-mount Kit or Desktop Stand ――Power the product off and remove the power cable from the power socket. 1 •• Notes ‒‒ Using a screw longer than the standard length can damage the internal components of the product. ‒‒ The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. 2 ‒‒ Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force.
Installation Attaching the Stand ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. 1 Insert the stand neck into the stand base in the direction shown in the figure. 2 Check that the stand neck is firmly connected. 3 Tightly fasten the connecting screw at the bottom of the stand base.
Removing the Stand ――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ――The exterior may differ depending on the product. 1 Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image. If Styrofoam is unavailable, use a thick sitting mat.
Chapter 03 Connecting and Using a Source Device Read below before installing the monitor. Connecting and Using a PC 1 Check the shapes of both ends of the cables that came with the monitor, and check the shapes and Select a connection method suitable for your PC. 2 Before connecting signal cables, disconnect the power cables for the monitor and external devices ――Provided ports may vary depending on the product.
Connection Using the HDMI-DVI Cable Connecting to Headphones Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. HDMI IN 1, HDMI IN 2 ――Use headphones when activating sound with an HDMI-HDMI or DP cable. ――The earphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type. ――The audio function is not supported if the source device is connected using the HDMI-DVI cable.
Connecting the Power 1 2 DC 19V 3 4 1 Connect the power plug to the AC/DC adapter. 2 Connect the AC/DC adapter cable to the DC 19V port on the back of the monitor. 3 Plug the AC/DC adapter into the power outlet. 4 Press the JOG button on the back of the monitor to turn it on. ――The input voltage is switched automatically. ――Specifications of the adapter may vary depending on the applicable quality requirements.
Correct posture to use the product Driver Installation ――You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ――To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Chapter 04 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. In PC mode •• Custom: Customize the contrast and brightness as required.
Brightness Sharpness You can adjust the general brightness of the picture. (Range: 0~100) Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the picture appear brighter. A higher value will make the outline of objects clearer. ――This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode. ――This option is not available when SAMSUNG Bright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Eco Saving Plus is enabled.
HDMI Black Level Game Mode If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. Configure the product screen settings for game mode. If this is the case, correct the degraded picture quality using HDMI Black Level. ――This menu is not available when Eye Saver Mode is enabled.
Picture Size Screen Adjustment Change the picture size. ――This menu is only available when Picture Size is set to Screen Fit in AV Mode. ――This menu is not available when PIP/PBP Mode is set to On and the Size is set to ――This option is not available when FreeSync is enabled. (PBP Mode). When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels.
Chapter 05 Configuring the PIP/PBP Settings A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. ――PIP/PBP mode is compatible with Windows 7, Windows 8, and Windows 10. ――The PIP/PBP function may not be available depending on the specifications of the graphics card used.
Size Sound Source Select the size and aspect ratio of the sub-screen. Set which screen you want to hear the sound for. •• : Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1920 x 2160 (width x height). •• : Select the icon image if you want to use PIP mode where the optimum resolution for the subscreen is 720 x 480 (width x height).
Source Picture Size Select the source for each screen. PIP Mode (available in PIP mode(Size / / PIP Mode (available in PIP mode (Size )) / / )) Select the image size for sub-screen. ――The input source for the main screen changes. ――With the exception of the current input source, the other two input sources can be selected. In PC mode ――The screen may flicker if the input signal is unstable. •• Auto: Display the picture according to the aspect ratio of the each screen input source.
PBP Mode (available in PBP mode(Size )) Contrast Set the Picture Size for each of the divided screens. In PC mode •• Auto: Display the picture according to the aspect ratio of the each screen input source. •• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input source. In AV mode •• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
Chapter 06 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Language Set the menu language. Transparency ――A change to the language setting will only be applied to the onscreen menu display.
Chapter 07 Setup and Reset A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. FreeSync •• Off: Disable FreeSync. •• Standard Engine: Enable the basic FreeSync functions of the AMD graphics card.
The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards: Make sure to install the latest official graphics drivers from AMD that support FreeSync. ――For additional AMD graphics card models that support the FreeSync feature, visit the official AMD website. ――Select FreeSync Off if you are using a graphics card from a different manufacturer.
Eco Saving Plus Reduce energy consumption compared to consumption at the maximum brightness level. Off Timer Plus ――This option is not available when SAMSUNG Bright is in Dynamic Contrast mode. Configuring Off Timer ――This menu is not available when Game Mode is enabled. Off Timer: Turn on Off Timer mode. ――This menu is not available when Eye Saver Mode is enabled. Turn Off After: The off timer can be set within a range of 1 to 23 hours.
PC/AV Mode Key Repeat Time Set PC/AV Mode to AV. The picture size will be enlarged. Control the response rate of a button when the button is pressed. This option is useful when you view a movie. Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed. •• Set to PC when connected to a PC. •• Set to AV when connected to an AV device. ――Supplied for the wide models only such as 16:9 or 16:10.
Information View the current input source, frequency and resolution.
Chapter 08 Installing the Software Easy Setting Box System Requirements OS Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at http://www.samsung.com. Hardware •• Windows 7 32Bit/64Bit •• At least 32MB of memory •• Windows 8 32Bit/64Bit •• At least 60MB of free space on the hard disk drive •• Windows 8.
Chapter 09 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center ――Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check the following. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product. Playback of high-definition large video files can be choppy. This may be because the video player is not optimized for the computer resource. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (P.44). Try playing the file on another video player.
Q&A ――Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. •• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Refresh rate under Monitor settings. •• Windows 8(Windows 8.
Chapter 10 Specifications General Model Name U32J590UQ* / U32J592UQ* Size 80.1 cm Display area 698.4 mm (H) x 392.85 mm (V) Pixel Pitch 0.181 mm (H) x 0.181 mm (V) Maximum Pixel Clock 533.25 MHz (DisplayPort) 297.00 MHz (HDMI1) 594.00 MHz (HDMI2) Power Supply AC100-240V~ 50/60Hz Based on the AC voltage of the adapter. For the DC voltage of the product, refer to the product label.
Standard Signal Mode Table Model Name Synchronization U32J590UQ* / U32J592UQ* Horizontal Frequency 30 – 135 kHz Vertical Frequency 56 – 75 Hz (DisplayPort) 24 – 75 Hz (HDMI1/HDMI2) Resolution Optimum Resolution 3840 x 2160 @ 60 Hz (DisplayPort) 3840 x 2160 @ 30 Hz (HDMI1) 3840 x 2160 @ 60 Hz (HDMI2) Maximum Resolution 3840 x 2160 @ 60 Hz (DisplayPort) 3840 x 2160 @ 30 Hz (HDMI1) 3840 x 2160 @ 60 Hz (HDMI2) If a signal that belongs to the following standard signal modes is transmitted from your PC,
Displayport Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) MAC, 1152 x 870 68.681 75.062 100.000 -/+/+ VESA, 1280 x 720 45.000 60.000 74.250 VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.
HDMI1 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080 67.500 60.000 148.500 +/+ VESA, 2560 x 1440 88.787 59.951 241.
HDMI2 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080 67.500 60.000 148.500 +/+ VESA, 2560 x 1440 88.787 59.951 241.500 +/- CEA, 3840 x 2160 135.000 60.000 594.
Chapter 11 Appendix Responsibility for the Pay Service (Cost to Customers) A Product damage caused by customer's fault ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service •• External impact or drop. technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.