User Manual

English-19
Skipping Unwanted Channels
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the P or P button to select the Channel.
Result: The options available in the Channel group are displayed.
3 Press the
-
or
+
button.
4 Press the P or P button to select the Add/Erase .
Press the
-
or
+
button.
Result
: The stored channels are displayed.
5 Press the P or P button to select the channel to add or erase.
If necessary, select the
Added or Erased by pressing the
-
or
+
button.
6 Repeat Step 5 for each channel to be added or erased.
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-tune
the channel manually.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the P or P button to select the Channel.
Result
:
The options available in the Channel group are displayed.
3 Press the
-
or
+
button .
4 Press the P or P button to select the Fine tune.
5 Obtain a sharp and clear picture and good sound quality by pressing
the
-
or
+
button.
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
Fine tune
+ 1
apollo_en 1/10/03 10:53 AM Page 19