User`s guide
Menu overview
33
2. Menu Overview and Basic Setup
Network
(Continue)
Clear Settings
a. This option may not be available depending on your country.
b. This option only appears if Paper Mismatch is enabled.
c. This option only appears when small amount of toner is left in the cartridge.
Items Options
34
2. Menu Overview and Basic Setup
Machine’s basic settings
You can set the machine’s settings by using the Device Settings in
Samsung Easy Printer Manager program.
• For Windows and Mac users, you set from Samsung Easy Printer
Manager > (Switch to advanced mode) > Device Settings, see
"Device Settings" on page 252.
After installation is complete, you may want to set the machine's default
settings.
To change the machine’s default settings, follow these steps:
It may be necessary to press OK to navigate to lower-level menus for some
models.
1
Select (Menu) > System Setup > Machine Setup on the control
panel.
2
Select the option you want, then press OK.
•Language: change the language that is displayed on the control panel.
•Date & Time: When you set the time and date, they are used in delay
fax. They are printed on reports. If, however, they are not correct, you
need to change it for the correct time being.
Enter the correct time and date using arrows or numeric keypad (see
"Keypad letters and numbers" on page 206).
• Month = 01 to 12
• Day = 01 to 31
• Year = requires four digits
• Hour = 01 to 12
• Minute = 00 to 59
•Clock Mode: You can set your machine to display the current time using
either a 12-hour or 24-hour format.
•Power Save: When you are not using the machine for a while, use this
feature to save power.
When you press the (Power/Wakeup) button, start printing, or a fax is
received, the product will wake up from the power saving mode.
•Altitude Adj.: Print quality is affected by atmospheric pressure, which
atmospheric pressure is determined by the height of the machine
above sea level. Before you set the altitude value, determine the
altitude where you are (see "Altitude adjustment" on page 203).
3
Select the option you want, then press OK.
4
Press OK to save the selection.