Installation Guide

6 English
Installation
Installation
STEP 5
Check the assembly
between Install hook
and Duct base.
1. Slide the oven with Duct Base into
cabinet until Duct Base touch the
front of cabinet.
2. Plug the Power cord into the
electrical outlet.
3. Tight 2 screws to Duct base and
Cabinet by using provided SCREW
A. (2 EA)
NOTE
Be aware when you put a oven into the
cabinet because cabinet may be moved.
Align the Center with cabinet
Install
Bracket
4. After placing the Install Bracket to
match with holes, tight together by
using provided SCREW A. (4 EA)
Duct Side
4. Tight 4 screws to Duct base and
Duct side on the left side by using
provided SCREW C. (4 EA)
Torx screw
5. Remove 2 Screw C on top of the
back. In addition, Remove 1 Torx
Screw to use Torx driver on bottom
of the back. Do not scrap Screw.
(3 EA)
Duct Rear
Torx screw
6. Tight a Torx Screw and 3 Screw C
on top of the back.
MA-TK8020_AA_II_DE68-04476A-01_EN.indd 6 2017-06-01  6:16:04