User Manual

13
B
12
GB
Function to skip through 10
tracks at a time
Press the +10 button briefly while playing back a
CD and MP3-CD. The track 10 tracks after the current
one will then be played back.
Example: If you want to select track 43 during playback of track
5, press the +10 button four times, and then press
the button three times .
5 ➝ 10 ➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43
When MP3-CD playback is selected again after your CD
player has been stopped or turned off, this function allows
playback from the start of the track that you last listened
to.
Press the Program button while your MP3-CD is being played .
The LAST ON and LAST OFF may be repeatedly selected.
Last Memory Function
(This function is only available during playback of MP3-CD.)
DECK
1/2
TUNING
MODE
+10

You can select “MEDLEY ON”and “MEDLEY OFF”during
playback of a CD.
Press the MEDLEY button once.
Result: “ MEDLEY ” is displayed.
The interval time between the tracks can be shorten.
Press the MEDLEY button again.
Cancel this function,return to normal playback.
Medley Play
(This function is only available during playback of a CD.)
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
To repeat... Press CD REPEAT on the Remote
control once or more times
until...
The current track indefinitely REPEAT 1 is displayed
The selected disc REPEAT 1 CD is displayed
All discs loaded REPEAT ALL CD is displayed
When you wish to stop the Repeat function, press CD REPEAT until
ALL CD or 1 CD is displayed, or press .
Repeating One or All Tracks
on the Compact Discs
1
1
2
2
DECK
1/2
TUNING
MODE
+10

1,2
2
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
If the CD function is selected, stop the player by pressing .
Load the selected CDs.
Press PROGRAM.
Result: The following indications are displayed:
(01 = Programme No, DI = Disc No, – – = Track No on the disc)
If necessary, select the disc containing the required track by pressing
the corresponding DISC (1, 2, 3) button.
Select the required track by pressing the UP and DOWN button:
Press to move back through the tracks
Press to move forward through the tracks
Press PROGRAM to confirm your selection.
Result:
The selection is stored and is displayed.
To select other tracks, repeat Steps 4 to 6.
Press CD/MP3-CD () to listen to the track selection in the order
programmed.
To... Press the and ...
Listen to the current track again Press
once
Listen to the previous track Press
twice
Listen to the next track Press
once
Skip forwards or backwards one The appropriate number of
or more tracks
pressing the
and
To cancel the selection, press .
Once if the compact disc player is stopped
Result:
PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
/
1
2
3
4
5
6
8
9
10
Programming the Order of CD Playback
(This function is not available during playback of an MP3-CD.)
7
4
8
3,6
1,10
5,9
5,9