User Manual
Table Of Contents
- Contents
- Safety Warnings
- Front Panel View
- Window Display
- Rear Panel View
- Connecting your System to the Power Supply
- Inserting Remote Control Batteries
- Connecting to an External Source
- Connecting the Loudspeakers
- Connecting the AM (MW) Aerial
- Connecting the FM Aerial
- DEMO/DIMMER function
- Setting the Clock
- Loading and Changing Compact Discs
- To replay the CD/MP3-CD
- Selecting a CD in the Disc changer
- To select the MP3-CD title and track
- Searching for a Specific Music Passage on a CD
- Shuffle Play Function
- Repeating One or All Tracks on the compact discs
- Medley Play
- Checking or Changing Programmed CD Tracks
- Selecting a Stored Station
- Improving Radio Reception
- Listening to a Cassette
- CD Synchro Record Feature
- Recording a Radio Program
- Selecting the Cassette Playback Mode (DECK 2only)
- Tape Counter
- Timer Function
- Cancelling the Timer
- Mute Function
- Selecting LATIN SOUND
- Mute Function Power Surround/Power Surround XT/Power Sound Function
- Setting the System to Switch off Auto maucally
- Connecting Headphones
- Microphone Function(option)
- Safety Precautions
- Cleaning Your Mini-Compact System
- Precautions When Using Audio Cassettes
- Technical Specifications
9
8
GB
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of the system and are
marked AM .
To avoid noise interference, check that the loudspeaker wires do not run
close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
Connecting the AM (MW) Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 16 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
Connecting the FM Aerial
Connect the connecting jacks (2) to the back of mini-compact system.
Make sure the polarities (+and -) are correct.
Left speaker wire should be connected to mark “L” of the unit back.
Right speaker wire should be connected to mark “R” of the unit back.
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.
Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
Connecting the Loudspeakers
RADIO ANTENNA
SPEAKERS OUT (6 )