3 DVD MINI COMPONENT SYSTEM WITH USB HOST DVD/VCD/CD/MP3-CD/CD-R/RW PLAYBACK THIS APPLIANCE IS MANUFACTURED BY: MAX-DC995 Instruction Manual MONO/ST COMPACT DIGITAL AUDIO AH68-01861B COMPACT DIGITAL VIDEO
CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUCT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product.
Contents PREPARATION Features PREPARATION Safety Warnings ............................................................................................................................................................................................1 Precautions....................................................................................................................................................................................................2 Features............................................
PREPARATION Description —Front Panel— 35 34 33 32 1 2 3 4 31 29 6 7 28 27 26 25 24 23 8 9 10 11 12 8. Video Output Connector Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector. 9. Component Video Output Connectors Connect a TV with component vide input jacks to these jacks. 22 10 21 11 10. 5.1 Channel Speaker Output Terminals 11.
PREPARATION Description —Remote Control— Insert Remote Batteries POWER STANDBY/ON button TAPE PLAY button OPEN/CLOSE button REMAIN/TAPE 1/2 button AUX/USB button TUNER/BAND button SLEEP button DISC SKIP/DVD button Number(0~9) buttons CANCEL button DIMMER/DEMO button Play/Pause button 1 Remove the battery cover on the back of the remote by pressing down and sliding the cover in the direction of the arrow. 2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –).
Connecting the Speakers Subwoofer SW L R C Front Speaker (R) SW Center Speaker Violet C Green RS LS Front Speaker (L) L R Gray Blue White Red SR Position of the DVD Player • Place it on a stand or cabinet shelf, or under the TV stand. Front Speakers L R • Place these speakers in front of your listening position, facing inwards (about 45°) toward you. • Place the speakers so that their tweeters will be at • the same height as your ear.
Connecting to a TV P.SCAN (Progressive Scan) Function Please be sure to turn off the power and unplug the power cord before moving or installing this unit. Please choose one of three video connection methods.
Connecting the FM, AM(MW) and SW(option) Antennas Connecting External Components Connecting an External Analog Component If AM reception is poor, connect an outdoor AM antenna(not supplied). Example: Analog signal components such as a VCR, Camcorder, and TV. CONNECTIONS AM Loop Antenna (supplied) FM Antenna (supplied) Audio Cable If the external analog component has only one Audio Out, connect either left or right. Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
Setting the Clock Disc Playback For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1 2 Switch the system on by pressing POWER button. Press TIMER/CLOCK twice. • CLOCK is displayed. 3 Selecting a CD in the Disc changer Press ENTER. The hour flashes. The CD function is automatically selected when Disc Skip is pushed.
Bonus Group / Navigating Pages Disc terminology Groups and tracks (DVD-AUDIO) • DVD-audios are divided into several large sections called "groups" and smaller sections called "tracks". Numbers are allotted to these sections. These numbers are called "group numbers" and "track numbers". Bonus Group DVDAUDIO Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging for details and the-key number.
DivX Playback 5 Minute Skip function During playback, press the , button. • Go to the screen about 5 minutes after whenever you press • Go to the screen about 5 minutes earlier whenever you press Skip Forward/Back During playback, press the button. button. button. • Go to the next file whenever you press button, if there are over 2 files in the disk. • Go to the previous file whenever you press Subtitle Display button, if there are over 2 files in the disk. Press the SUBTITLE button.
Skip Forward/Back Playing Media Files using the USB feature During playback, press the You can connect and play files from external USB storage devices such as MP3 players, USB flash memory, etc. using the player's USB function. 1 connect the USB cable. 2 button. • When there is more than a file, when you press the • When there is more than a file, when you press the Press the USB button on the main unit or the AUX button on the remote control to select the USB mode.
Displaying Disc Information Fast/Slow Playback You can view playback information on the disc on the TV screen. Fast Playback Press and hold Press INFO button on the remote control . VCD CD VCD CD MP3 . • Each time the button is held down during playback, • Each time the button is pressed, the display changes as follows: DVD DVD the playback speed changes as follows: MP3 JPEG DivX OPERATION Display disappears Display disappears Slow Playback Press SLOW button.
Skipping Scenes/Songs Angle Function This function allows you to view the same scene in different angles. DVD VCD DVD MP3 Briefly press . • Each time the button is pressed briefly during playback, the previous or next chapter, • track, or directory (file) will be played. But, you cannot skip chapters consecutively. VCD 2 3 Press Cursor , buttons or numeric buttons to select the desired angle. Press Cursor button to move to ANGLE display. MP3 OPERATION DVD 1 Press INFO button.
Repeat Playback Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). DVD DVD VCD CD MP3 CD To Select a Repeat Playback Mode in the Disc Information Screen JPEG Press REPEAT button. • Each time the button is pressed during playback, the repeat playback mode changes as follows: DVD VCD MP3 JPEG Repeat Playback Options 2 Press Cursor button to move to REPEAT PLAYBACK display. •For a VCD or CD,Press INFO button once.
A↔B Repeat Playback Zoom Function This function allows you to enlarge a particular area of the displayed image. DVD 1 VCD CD Press INFO button twice. Zoom (Screen Enlarge) Function 2 Press Cursor button to move to REPEAT PLAYBACK ( ) display. 1 Press ZOOM button. 2 Press Cursor , , , buttons to move to the area you want to enlarge. • For a VCD or CD, press INFO DVD 3 VCD Press ENTER button. • Each time the button is pressed, the button once.
Selecting Audio Subtitle Language Audio Language Selection Function 1 2 Press INFO button twice. DVD Press Cursor , buttons or numeric buttons to select the desired audio language. Moving Directly to a Scene/Song DVD 1 VCD CD Moving to a Title/Track Press INFO button. 2 Moving to a Chapter Press Cursor , buttons or numeric buttons to select the desired title/track and then press ENTER button. 3 Press Cursor , buttons to move to Chapter display.
JPEG File Playback JPEG Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this DVD player. Slide Mode Digest Function You can view 9 JPEG images on the TV screen. 1 1 Place the JPEG disc on the disc tray. Press DIGEST button during playback. 2 • JPEG files will be shown in • The selected image is played for 5 seconds before moving to 9 windows. Press the OPEN/CLOSE button. • Playback starts automatically.
Using Disc Menu Using the Title Menu You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, this function may either not work at all or may work differently. DVD 1 In stop mode,Press MENU button. • When playing a VCD (version 2.0), this toggles between PBC ON and OFF.
Language Code List Setting the Language Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 35). OSD language is set to English by default. 1 In stop mode,Press MENU button. 5 Press Cursor , button to select the desired language and then press ENTER button. • Once the setup is complete, if the language was set to English, OSD will be displayed in English.
Setting TV Screen type 1 In stop mode,Press MENU button. 2 Press Cursor button to move to ‘Setup’ and then press ENTER button. Adjusting the TV Aspect Ratio (Screen Size) The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen size, you should adjust the aspect ratio to fit your TV or monitor.
1 Setting the Password Use this to restrict playback of adult or violent DVDs you do not want children to view. You can set the password for the Parental (rating level) setting. in stop mode,Press MENU button. Press Cursor , button to select the desired rating level and then press ENTER button. • If you have selected Level 6, you • cannot view DVDs with Level 7 or higher. The higher the level, the closer the content is to violent or adult material.
Setting the Wallpaper JPEG DVD VCD While watching a DVD,,VCD or JPEG CD, you can set the image you like as a wallpaper. Setting the Wallpaper 1 During playback, press PLAY/PAUSE button when the image you like comes up. 2 To Change the Wallpaper Press LOGO button. 1 Press MENU button. 2 Press Cursor button to move to ‘Setup’ and then press ENTER button. 5 Press MENU button to exit the setup screen. 3 Press Cursor button to move to ‘LOGO’ and then press ENTER button.
DVD Playback Mode AV SYNC Setup Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode. Video may look slower than the audio if it is connected with digital TV. In this case, adjust the delay time of audio to optimal status to fit the video. 1 Press the MENU button while the disc tray is open. 2 Press Cursor button to move to ‘Setup’ and then press ENTER button. 1 Press the MENU button.
1 Setting the Speaker Mode Setting the Test Tone Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. Press the Test Tone to check the speaker connections and to adjust the speaker levels. In Stop mode, press MENU button. 2 Press Cursor button to move to ‘Audio’ and then press ENTER button. 1 In Stop mode, press MENU button.
Setting the Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 1 In Stop mode, press MENU button. 2 Press Cursor button to move to ‘Audio’ and then press ENTER button. 3 Press Cursor button to move to ‘DELAY TIME’ and then press ENTER button. 4 Press Cursor , , , buttons to move to the desired speaker and then press ENTER button. 5 Press Cursor , to set the Delay time.
Setting the Audio Quality You can adjust the balance and level for each speaker. Method 1 1 When adjusting the audio quality using the setup screen In Stop mode, press MENU button. 2 Press Cursor button to move to ‘Audio’ and then press ENTER button. When manually adjusting with the SOUND EDIT button Method 2 Adjusting Front Speaker Balance 1 TITLE Press SOUND EDIT button and then press Cursor , .
Setting the DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 1 In stop mode,Press MENU button. 3 If “DRC” is selected, press ENTER. 4 Press Cursor , adjust the ‘DRC’. to • The Cursor button is pressed, the greater the effect, and the Cursor button is pressed, the smaller the effect. SETUP 2 Press Cursor button to move to ‘Audio’ and then press ENTER button. Press RETURN button to return to the previous level.
Dolby Pro Logic II Mode Dolby Pro Logic II Effect You can select the desired Dolby Pro Logic II audio mode. Press This function works only in Dolby Pro Logic MUSIC mode. 1 PL II MODE button. Press PL II MODE button to select ‘MUSIC’ mode. 2 Press PL II EFFECT button and then press Cursor , buttons to select the mode. • You can select either 0 or 1.
Listening to Radio Presetting Stations You can store up to: You can listen to the chosen band (FM, (SW1,2),MW broadcast stations) by using either the automatic or manual tuning operation. Remote Control Unit 1 Tune in to the desired station. Automatic Tuning 1 • The selection toggles back and forth between "FM ➝(SW1,2) ➝MW" each time the TUNER(BAND) button is pressed. or 15 FM stations 15AM stations Example: Presetting FM 89.1 in the memory 2 Press TUNER/ BAND button.
Listening to a Cassette Selecting the Cassette Playback Mode Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 70. Your mini component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically. . Press REVERSE MODE until the appropriate symbol is displayed. • : One • : One • 1 Switch the system on by pressing STANDBY ON.
Recording a Compact Disc Coping a Cassette(Dubbing) You can record a compact disc on a cassette in two different ways: You can copy a cassette from Tape 1 to Tape 2. •Normal speed dubbing in selecting Tape function mode. •You do not need to adjust the volume, as it has no effect on the recording. •Take care not to insert the tape to be copied in Tape 2, as it will be erased when you start recording. 1 Switch the system on by pressing STANDBY/ON. 2 Insert a blank cassette in Tape 2.
Recording a Radio Program Direct recording You can record a radio program of your choice. You do not need to adjust the volume, as it has no effect on the recording. The direct recording mode enables you to start recording with any track on the compact disc. 1 Switch the system on by pressing STANDBY/ON. 2 Insert a blank cassette in Tape 2. • Press the PUSH/EJECT button ( • 4 Press the DVD/CD ( ) button. • Use the CD selection ( ) buttons to select the desired song.
Canceling the Timer/SUB WOOFER LEVEL Function Timer Function After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it. • The timer enables you to switch the system on or off at specific times. • If you no longer want the system to be switched on or off automatically, you must cancel the timer. • Before setting the timer, check that the current time is correct.
Sleep Timer Function / Mute Function P.SURROUND XT AND SOUND MODE Function Sleep Timer Function You can set the time that the DVD player will shut itself off. Press SLEEP button. • Each time the button is pressed, the selection changes as follows: 90 MIN ➝ 60 MIN ➝ 45 MIN ➝ 30 MIN ➝ 15 MIN ➝ OFF. kHz MHz Selecting SOUND MODE P.SURROUND XT Function Your compact system is equipped with the function of Power Sound/Power Surround/Power Surround XT.
DEMO Function / DIMMER Function/ ECO Function DEMO Function You can view the various functions available on your system. Press DEMO/DIMMER button. • The various functions available are listed in turn on the • display. All these functions are described in detail in this booklet. For instructions on how to use them, refer to the appropriate sections. Bass/Treble Level (USER EQ) Function BASS Level Function DIMMER Function BASS function stresses low tones providing thudding sound effects.
Connecting Headphones/Microphone(option) You can connect a set of headphones to your micro component system so that you can listen to music or radio programmers without disturbing other people in the room. The earphones must have a 3.5ø jack or an appropriate adapter. Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause breaks in playback. Be especially careful not to scratch discs when handling them.
Before Calling for Service Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center. Symptom Disc tray does not open. Playback does not start. Check/Remedy • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on.
Notes on Discs Disc Recording Format Notes on Terminology ANGLE CD-R Discs • Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R discs may not be playable. • Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable. • If possible, do not use CD-RW (Rewritable) media, as they may not be playable. • Only the CD-Rs that are properly "closed" can be fully played.
USB Feature Supported Player Specifications Digital Camera G E N E R A L F M A M T U N E R T U N E R Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range Usable Sensitivity S/N Ratio Distortion Usable Sensitivity S/N Ratio Distortion Composite Video V I D E O O U T P U T A M P L I F I E R Component Video Front speaker output Center speaker output Rear speaker output Subwoofer speaker output Frequency range S/N Ratio Channel separation Input sensitivity Color Signal : 0
USB Feature Supported Player Multi Card Reader USB Flash Disk Product Company Type Cruzer Micro SanDisk USB2.0 USB Flash Drive 128M Cruzer Mini SanDisk USB2.0 128M Cruzer Mini SanDisk USB2.0 256M SONY Micro Vault SONY USB2.0 64MB FLEX DRIVE serotech USB2.0 32MB AnyDrive A.L tech USB2.0 128MB XTICK Micro Mini iFlash LG RiDATA Memo LG USB2.0 128M IOMEGA USB2.0 128M Imation USB2.0 64M XTICK(M) USB2.0 64M EZDrive USB2.0 64M Product UNICORN USB2.
