User manual
43 44
Listening to Radio
You can listen to the chosen band (FM, MW, (LW),(SW1,2) broadcast stations)
by using either the automatic or manual tuning operation.
Presetting Stations
2
1
•
The selection toggles back
and forth between "FM
➝
MW
➝
(LW)
➝
(SW1,2)" each time
the TUNER(BAND) button is
pressed.
Tune in to the
desired station.
DISC SKIP ZOOM SLOW
REPEAT REMAIN SUB TITLE
TUNER
VOLUME
MUTE
M
E
N
U
IN
FO
R
E
T
U
R
N
TIMER/CLOCK
TIMER ON/OFF
LOGO SLIDE MODE
NTSC/PAL
CANCEL DIGEST
TUNING
TAPE AUX
BAND
SLEEP DIMMER
DECK 1/2
MONO/ST
SOUND
MODE
AUDIO
STEP
TUNER
MEMORY
P. SCAN
Press TUNER/
BAND button.
Manual Tuning
21
Select a broadcast
station.
Press the STOP ( ) button
to select PRESET and then
press button or turn Multi Jog
Knob to select the preset station.
Automatic Tuning 1
Press the Function
button to select the
desired band (FM,
MW,(LW),(SW1,2)).
Press the STOP
( )
button to
select "AUTO" and then press
button or turn Multi-Jog Knob to
automatically search the band.
Automatic Tuning 2
Press STOP
( )
to select
MANUAL and then briefly
press
or turn Multi Jog Knob
to tune in to a lower or higher frequency.
Manual Tuning
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
To tune in to a preset station, press on the
remote control to select a channel.
•
Refer to Step 2 on page 41
to automatically or manually
tune in to a station.
21
•
Each time the button is pressed,
the band switches between
"FM
➝
MW
➝
(LW)
➝
(SW1,2)".
•
“PROGRAM” flashes in the
display.
3
Example: Presetting FM 89.1 in the memory
Press to
select "89.10".
Press the
TUNER(BAND)
button and select
the FM band.
•
Press the TUNER MEMORY button before
‘
PROGRAM
’ disappears from the display.
•
‘
PROGRAM
’ disappears from the display
and the station is stored in memory.
54
•
You can select between 1 and
15.
Press the TUNER
MEMORY button.
Press the TUNER
MEMORY button.
6
To preset another
station, repeat
steps 2 to 5.
Press to
select preset
number.
Press button or
button to select the preset
station.
Press and hold button to
automatically search the band.
Briefly press button to
Automatic Tuning 1
Remote Control Unit
Main Unit
You can store up to:
Automatic Tuning 2
kHz
MHz
kHz
MHz
kHz
PROGRAM
MHz
kHz
PROGRAM
MHz
kHz
MHz
RADIO OPERATION
increase or decrease the frequency
incrementally.
15 FM stations
15 AM stations
15 FM stations
8 AM(MW) stations
7 LW stations
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
• FM Frequency Modulation
• AM(MW) Medium Wave
• LW Long Wave
OPTION
OPTION
OPTION