Наръчник за потребителя

GB
29
The Dolby Surround feature and the center and rear speakers
(standard) assure full-scale home theater sound. When playing
back laser discs or video software that have been specially
recorded with four-channel sound (left, right, center, rear)and
steering logic(for sound directionality), astonishingly realistic
sound surrounds the listener to create a new level of
audio/visual entertainment.
Positioning The Speakers
To achieve the optimum effects obtainable with this Dolby Surround
system, it is important to position the speakers properly. Refer to the
following illustration to find the best location in your room.
Front speakers
Center speaker
Position in the center of the two front speakers.
Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area.
No sound is heard from the center and surround speakers
when the Dolby Surround or DSP are set to off.
The center speaker is heard only when the Dolby Surround
is set to on.
Dolby Surround
Adjusting Speaker Level Balance
The unit is equipped with a built-in test signal generator called a
noise sequencer which outputs a noise signal that ‘travels’ from
channel to channel. This enables the simple adjustment of sound
levels, to achieve, at the listening position, the same apparent
loudness from each channel. Use the remote control.
Press the Dolby Surround button to select PRO-LOGIC.
Result
: “ PRO-LOGIC” appears on the displayed.
Press the Test Tone button.
A noise signal is sent to each channel in turn in the following
sequence.
(L : Left Speaker, CNTR : Center Speaker,
R : Right Speaker, REAR : Rear Speaker)
Press the Test Tone button again to stop the noise signal.
To change the sound levels or delay time after adjusting the balance
with the noise sequencer.
Press the Sound Edit button.
While L, R, CNTR, REAR is displayed, press the UP/DOWN
( / ) button.
Press the Speaker Mode button.
While CNTR, REAR, DELAY TIME is displayed, press the
UP/DOWN (
/
) button.
– CNTR : Large/Small/None
– REAR : USE/None
– DELAY TIME : 15/20/25/30 MS
When the Dolby surround system is on, this function can be
operated.
1
2
3
L
Set
TV
C
R
1
2
1
SS
3
3
1
2
3
4
Sleep Speaker Mode
Title
Angle
Sound Edit
Audio
Test Tone
Display
Set up
Return
AUX
Book Mark
Menu
Sub Title
Zoom
Step
Enter
Timer On/Off
DVD/CD
+
Volume
Tuning
Mode
Volume
—
DECK
Dolby Surround
Power Sound S.Bass
Disc Skip
Deck 1/2 Band
Clear Repeat
Program
DSP/EQ
10/0
456
789
1
2,3
4
L CNTR REARR
DOLBY SURROUND
PRO LOGIC
“DTS” and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc.
DIGITAL OUT
Manufactured under license from Dolby Laboratories.
“DOLBY”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished Works. ©1992-1997 Dolby Laboratories.
All rights reserved.
4
4
Dolby Surround