Instruction manual

Playback
Press the Open/Close( ) button.
Insert a DVD disc.
Place a disc gently into the tray with the disc's label facing up.
Press the Play/Pause( ) button or Open/Close( ) button to
close the disc tray.
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
Never force the compact disc carrousel when opening and clos-
ing the compartment.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled “Precautions When Using Compact Discs” on
page 35.
Switch the system on by pressing On/Standby.
Press the Open/Close( ) button on the front panel.
Result:
The compartment opens.
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
If you wish to load a third compact disc, press the Disc Change
button on the front panel (or Disc Skip on the remote control).
Result:
The carrousel rotates by 120°.
Close the compartment by pressing the Open/Close( ) button
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play... Press...
Disc 1 DVD/CD ( ) or Disc 1
Disc 2 Disc 2
Disc 3 Disc 3
Result:
The compartment closes automatically and the disc selected
starts playing.
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
Playing a Disc
1
2
3
Loading and Changing Compact
Discs
1
2
3
4
5
6
Disc1 Disc2
Disc3 Disc Change
Open/Close
On/Standby
Demo
Timer/
Clock
Mono/ST.
Display
Counter
Reset
Down Tuning Mode Up
Band
R
TUNER DVD/CD TAPE AUX
Memory REV.Mode
Multi Jog
Volume
Dolby Digital
DSP/EQ S.Bass
Enter
PTY
RDS
Display
Power
Sound
Dolby
Surround
DVD/CD
1
5
5
4
2,5
GB
13
Press the Play/Pause ( ) button during playback.
To resume, press the Play/Pause ( ) button again.
Depending on the disc, the initial disc information screen may
look disc to disc.
When playing a DVD containing MPEG format, video may not
be reproduced correctly and you may get picture distortion.
Pausing Playback
Press the Stop ( ) button during playback.
During playback, when the Stop ( )button is pressed, the position is stored
in the memory, and STOP is shown on the display.
When the Play/Pause ( ) button or Return button is pressed
subsequently , playback resumes from the position at which it was stopped.
If the Stop ( ) button is pressed a second time, the resume play' memory
function is canceled, and STOP is shown on the display. When the
Play/Pause ( )button is pressed, playback starts from the beginning.
Stopping Playback
Disc1 Disc2
Disc3 Disc Change
Open/Close
On/Standby
Demo
Timer/
Clock
Band
R
TUNER DVD/CD TAPE AUX
Volume
Dolby Digital
DSP/EQ S.Bass
PTY
RDS
Display
Power
Sound
Dolby
Surround
DVD/CD
1,3
3
The CD function is automatically selected when DISC SKIP is
pushed.
To select a specific disc, press the corresponding Disc (1, 2, 3) button
on the front panel or Disc Skip on the remote control, until the
required disc indicator flashes.
If you use the Disc (1, 2, 3) function when listening to the
radio or to a tape, the system switches automatically to the
DVD/CD mode.
If the disc selected is not loaded, the next disc is played auto-
matically.
Selecting a Disc in the CD changer
Disc1 Disc2
Disc3 Disc Change
Open/Close
DN85/87/GB/RDS-1~14 5/16/03 15:11 Page 13
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Samsung Manuals