THREE-CD CHANGER MINI-COMPACT SYSTEM MAX-N22/N25 Instruction Manual Downloaded From Disc-Player.
Safety Warnings GB CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This Compact Disc player is classified as a CLASS 1 LASER product.
Thank you for buying this SAMSUNG mini-compact system. Contents Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. SAFETY WARNINGS.............................................................................................................................................................. INSTALLING YOUR MINI-COMPACT SYSTEM Front Panel View ................................................................................
Front Panel View GB 35 34 1 33 2 32 3 31 R Standby 4 30 Demo 5 Mono/ST Band TUNER CD TAPE AUX Open/Close Program/Set Disc 2 Disc 3 Timer/Clock CD Repeat Ro Vol. Phones 7 Mic ic Class Mic Volume Down MIN 29 Disc Change ck 6 Timer On/Off Pop Disc 1 AI Off/Sleep Preset/Manual Hi Speed Dubbing Up S.BASS MAX 8 9 10 11 28 27 26 25 24 23 CD Synchro / 12 22 13 14 21 15 16 17 20 19 18 1. 2. 3. 4. 5. 6. 7 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
Remote Control GB 21 On/Standby Timer Timer/ On/Off Clock 20 1 2 19 Preset EQ Mute Function 18 3 4 5 6 7 S.Bass Sleep CD Repeat Program /Set Mono/ST. Tuner Band Open/ Close Disc Skip +10 17 16 15 14 CD 13 8 12 VOL. 9 CD Tuning Mode CD 11 10 VOL. 1. On/Standby 11. Tuning Mode 2. S. Bass 12. Volume Increase 3. Equalizer Mode Selection 13. Play Back/Pause 4. Program/Set 14. Two-Digit Track Selection 5. Sleep 15. Disc Number Skip 6. Open/Close 16.
Rear Panel View GB MAX-N25 MAX-N22 1 2 1 3 4 5 2 3 4 SPEAKERS (IMPEDANCE 6Ω) (IMPEDANCE 4Ω) 5 6 AC CORD 7 AC CORD 7 6 1. SW Aerial Connector Terminal (option) 1. SW Aerial Connector Terminal (option) 2. CD Digital Out Jack (option) 2. FM Aerial Connector Terminals 3. FM Aerial Connector Terminals 3. AM Aerial Connector Terminal 4. AM Aerial Connector Terminal 4. Aux-Input 5. Aux-Input 5. Loudspeaker Connector Terminals 6. Loudspeaker Connector Terminals 6.
Where to Install Your Mini-Compact System Connecting the Loudspeakers GB To take full advantage of your new mini-compact system, follow these installation instructions before connecting the unit. Install the system on a flat, stable surface. Never place this unit on carpeting. Never place this unit in an outdoor area. Maintain an open space of approximately 4 inches (10 cm) on the sides and rear of the system, for ventilation purposes.
Connecting the AM (MW)/LW Aerial Connecting the FM Aerial GB The AM aerial (for long and medium waves) can be: Placed on a stable surface Fixed to the wall The AM aerial connector terminals are located on the rear of the system and are marked AM. There are two types of aerial, (depending on option chosen). 1 How to connect a COAXIAL TYPE aerial. Connect a 75Ω antenna to the FM antenna terminal.
Menu System Setting the Clock GB To select the basic functions on your mini-component system (radio, compact disc, cassette or auxiliary source), press the corresponding buttons on the front panel or FUNCTION on the remote control. Depending on the feature that you select, the multi-function buttons illuminate. 1 2 Your system is equipped with a clock which allows you to turn your system on and off automatically.
Loading and Changing Compact Discs Listening to a Compact Disc GB The CD disc changer can contain up to three 12 cm or 8 cm compact discs without using an adapter. When you have loaded at least one compact disc into the player, you can start listening to it. Always treat your compact discs with care; refer, if necessary, to the section entitled ÒPrecautions When Using Compact DiscsÓ on page 21. Never force the compact disc carrousel when opening and closing the compartment.
Selecting a Track with a Two-Digit Number Selecting a Disc in the CD changer GB The CD function is automatically selected when DISC SKIP is pushed. To select a track with a two-digit number faster, use the +10 key button. To select a specific disc, press the corresponding Disc (1, 2, 3) button on the front panel or Disc Skip on the remote control, until the required disc indicator flashes. Result: All the discs will be played in turn, starting with the one selected.
Repeating One or All Tracks on the Compact Discs GB You can repeat indefinitely: A specific track on a compact disc. All tracks on the compact disc selected. All discs loaded in the carrousel 1 2 To repeat... Press CD REPEAT on the REMOTE CONTROL one or more times until... The current track indefinitely The selected disc All discs loaded REPEAT 1 is displayed REPEAT DISC is displayed REPEAT DISC ALL is displayed 8 Press 9 To... Press...
Searching for and Storing the Radio Stations Checking or Changing Programmed Tracks GB You can check or change your selection of tracks at any time. 1 2 Press 3 Press Program/Set again. Result: The first track selected is displayed, together with the letter CH (Change). 4 Press Program/Set one or more times until the track to be changed is displayed. once if you have started listening to the selection. Press Program/Set.
Searching for and Storing the Radio Stations (continued) Improving Radio Reception GB 8 If you do not want to store the radio station found, revert to Step 4 and search for another station. Otherwise: You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial Testing the positions of the FM and AM(MW) aerials before fixing them permanently a Press Program/Set. Result: The programme number and PROGRAM are displayed for a few seconds.
Listening to Two Cassettes in Sequence Listening to a Cassette GB When you press one of the tape deck’s buttons, except for Stop/Eject button it remain in the down position. It returns to its original position automatically when the function is completed or you cancel the command. Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 21. 1 2 3 Switch the system on by pressing the On/Standby button.
Copying a Cassette (Dubbing) Recording a Radio Programme GB You can record a radio programme of your choice. You can only record on cassettes in Deck 1. You can only record on normal bias cassettes. You do not need to adjust the volume, as it has no effect on recording. 1 2 3 4 5 6 You can copy a cassette from Deck 2 to Deck 1. Two options are available: Normal speed dubbing High-speed dubbing Take care not to insert the tape to be copied in Deck 1, as it will be erased when you start recording.
Cancelling the Timer Timer Function ERROR is displayed. The timer enables you to switch the system on or off at specific times. Example: You wish to wake up to music every morning. After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it. If you no longer want the system to be switched on or off automatically, you must cancel the timer.
Mute Function Selecting an Equalizer Preset GB You can turn the sound off temporarily on your system. Example: You wish to answer a telephone call. 1 2 Press Mute on the remote control. Result: The equalizer symbols are no longer displayed, the speaker symbols flash and the sound is switched off. To switch the sound back on, press Mute again or the VOL. buttons.
CD DIGITAL OUT Jack (option) Microphone Function (option) GB This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment. (DAT deck, MD recorder, etc.). Remove the dust cap (1) from the CD DIGITAL OUT jack. Then, connect an optical cable plug to the CD DIGITAL OUT jack. The microphone enables the user to mix in his or her vocals to sing-along with the music. Preparation Plug the microphone with a 6.3mm phone jack into microphone terminal.
Connecting to an External Source Safety Precautions GB The auxiliary input can be used to take advantage of the sound quality of your mini-compact system when listening to other sources. Examples: A television A video disc player A DAT or DCC cassette player A Hi-Fi stereo video cassette recorder The following diagrams illustrate the precautions to be taken when using or moving your mini-compact system. To connect the external source, the source must have an audio output.
Cleaning Your Mini-Compact System Precautions When Using Audio Cassettes GB Check that the tape in the cassette is sufficiently taught. To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive tape. When you have finished playing a cassette, always put it back in its case.
Technical Specifications GB SAMSUNG strives to improve its products at all times. Both the design specifications and these user instructions are thus subject to change without notice. RADIO LW (OPTION) Usable sensitivity 1000 µV SW (OPTION) Usable sensitivity 80 µV MW (AM) Signal/noise ratio 40 dB Usable sensitivity 500 µV Total harmonic distortion 2% FM Signal/noise ratio 60 dB Usable sensitivity 3 µV Total harmonic distortion 0.
THIS APPLIANCE IS MANUFACTURED BY: ELECTRONICS Downloaded From Disc-Player.
