manual de utilizador
GB
17
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Press Timer/Clock until TIMER is displayed.
Press Program/Set.
Result:
ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by pressing Tuning and .
b Press Program/Set.
Result:
The minutes flash.
c Set the minutes by pressing Tuning and .
d Press Program/Set.
Result:
OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a Set the hour by pressing Tuning and .
b Press Program/Set.
Result:
The minutes flash.
c Set the minutes by pressing Tuning and .
d Press Program/Set.
Result:
VOL XX is displayed, where XX corresponds to the volume
already set.
Press
Tuning and
to adjust the volume level and press
Program/Set
.
Result: The source to be selected is displayed.
Press Tuning and to select the source to be played when
the system switches on.
If you select... You must also...
TUNER (radio) a Select the FM or AM frequency band by
pressing Tuning
and .
b Press Program/Set.
c Select a preset station by pressing
Tuning
and .
CD (compact disc) a Load one or more compact discs.
Press On/Standby to set the system to standby mode.
Result
: TIMER is displayed to the bottom left of the time, indicating
that the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word
ERROR is displayed.
After having set the timer, it will start automatically as
shown by the TIMER indication on the display. If you no
longer wish to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To... Press TIMER-ON/OFF...
Cancel the timer Once.
Result
: is no longer displayed.
Restart the timer Twice.
Result
: is displayed again.
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
Press AI Off/Sleep.
Result: playback starts and the following indications are displayed:
Press AI Off/Sleep one or more times to indicate how long the sys-
tem should continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing AI Off/Sleep
Change the remaining time by repeating Steps 1 and 2
Press AI Off/Sleep one or more times until AI SLEEP is displayed.
Result
: The system will automatically switch off at the end of disc or
cassette.
To cancel SLEEP or AI OFF function, press AI Off/Sleep one or more
times until OFF is display.
Timer Function
1
2
3
4
5
6
Cancelling the Timer
7
8
On/Standby
Preset EQ
Sleep Mono/ST. Tuner
Program
/Set
Mute FunctionS.Bass
Timer
On/Off
Timer/
Clock
1
CD
Tuning
Mode
CD
CD
VOL.
VOL.
CD
CD
2
3,4,5,6,7
4,5,6,7
4,5,6,7
On/Standby
Preset EQ
Sleep Mono/ST. Tuner
Band
Program
/Set
Mute FunctionS.Bass
Timer
On/Off
Timer/
Clock
Setting the System to Switch off
Automatically
1
2
3
4
90 MIN
Mono/ST
TUNER CD TAPE AUX
Band
Disc 1
CD Repeat Disc Change
Disc 2 Disc 3
Vol.
Program/Set
Phones
AI Off/Sleep
Timer On/Off Timer/Clock
Demo
S.BASS
Down Preset/Manual Up
C
l
a
s
s
i
c