Инструкция по использованию

If the timer switch on and off times are identical, the word ERROR is
displayed.
GB
23
You can turn the sound off temporarily on your system.
Example
: You wish to answer a telephone call.
Press MUTE.
To switch the sound back on , press MUTE again or the VOLUME
buttons.
Mute Function
GB
22
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have 12 seconds to set the required
options. If you exceed this time, you must start again.
Switch the system on by pressing STANDBY/ON.
Press TIMER/CLOCK until TIMER is displayed.
Press ENTER.
Result:
ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER.
Result:
The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER.
Result:
OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER.
Result:
The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER.
Result:
VOL XX is displayed, where XX corresponds to the
volume already set.
Press Down and Up to adjust the volume level and press
ENTER.
Result:
The source to be selected is displayed.
Turn the MULTI JOG knob to select the source to be played when
the system switches on.
If you select... You must also...
TAPE (cassette) Insert a recorded cassette in one of
the decks before setting the
system to standby.
TUNER (radio) a Press ENTER.
b Select a preset station by tuning
the Multi Jog knob to the right or
to the left.
CD (compact disc) Load one or more compact discs.
Press ENTER to confirm the timer.
Press STANDBY/ON to set the system to standby mode.
Result
: is displayed to the top of the time, indicating that the timer
has been set. The system will switch on and off automatically
at the required times.
Timer Function
7
8
9
5
6
1
2
3
4
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To... Press Timer-On/Off...
Cancel the timer Once.
Result
: is no longer displayed.
Restart the timer Twice.
Result
: is displayed again.
Cancelling the Timer
2
1
Your mini-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
Turn SOUND MODE on the front panel or Press SOUND MODE on
the remote control until the required option is selected.
To obtain a... Select...
Normal balance (linear) PASS
Balance suitable for pop music POP
Balance suitable for rock music ROCK
Balance suitable for classic music CLASSIC
Selecting Sound Mode
Your mini-compact system is equipped with the function
of Power Sound .
The function of Power Sound amplifies bass and improves
high key or bass twice as much for you to appreciate
powerful real sound.
Press the P.SOUND button on the front panel.
Result: Press P.SOUND button on the front panel, “P,SOUND” is
displayed.
To cancel this function, press P.SOUND button again .
Power Sound Function
1
1
2
1,9
3,4,5,6,7,8
4,5,6,7
4,5,6,7
1
2
To set the timer function
You may use / buttons to adjust in step 4, 5, 6, 7.
You can freely set the desired tone (BASE/TREBLE) by
using the USER EQ function.
Press the Sound Mode button longer.
Result:
"USER EQ" flashes on the display for 5 seconds.
Press the Tuning Mode button.
Result:
TREBLE level appears on the display.
(Factory-set TREBLE level is "TRE 0 dB".)
Press Tuning , to adjust the TREBLE level (-6 to +6).
* TREBLE level can be adjusted at a 2 dB increment.
Press the Tuning Mode button to complete the setting.
This function is available only on the remote control.
How to adjust USER EQ?(option)
1
2
3
4
3
1
3
2,4