User manual

GB
20
Subwoofer function stresses low tones providing thudding
sound effects.
Tur n Subwoofer Level knob on the front panel or press the
Subwoofer Level button on the remote control.
Press the button on the remote control repeatedly to select
➞
”OFF ➞ WOOFER1 ➞ WOOFER2 ➞ WOOFER3 ➞ WOOFER4”.
or turn the knob on the front panel repeatedly to select
“OFF
↔ WOOFER 1 ↔ WOOFER 2 ↔ WOOFER 3 ↔ WOOFER 4”.
You can select the level of low tones you desire.
1
2
Subwoofer Level Function
Your mini-compact system is equipped with the function
of Power Surround.
The Power Surround replaces conventional stereo sound
with a wider and more true-to-life sound. It creates the
feeling of being right at the centre of the music and being
surrounded by total music sound.
Press P.Surround button on the front panel until the
required option is selected. Each time the P. Surround but-
ton is pressed, “P,SURR, ” is selected or cancelled in this
order.
You can turn the sound off temporarily on your system.
Example
: You wish to answer a telephone call.
Press Mute.
To switch the sound back on (at the same volume as before), press
Mute again or the Volume buttons.
Mute Function
Power Surround Function
2
1
Your mini-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
This model provides D.S.P modes so that you can enjoy virtu-
ally original sound.
Tur n Sound Mode on the front panel or Press Sound Mode on the remote
control until the required option is selected.
To obtain a... Select...
Normal balance (linear) PASS
Balance suitable for pop music POP
Balance suitable for rock music ROCK
Balance suitable for classic music CLASSIC
Balance suitable for hall HALL
Balance suitable for live LIVE
Balance suitable for cinema CINEMA
Selecting Sound Mode
You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The earphones
must have a 3.5 ø jack or an appropriate adapter.
Connect the headphones to the Phones jack on the front panel.
Result
: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage
your hearing.
Connecting Headphones