User Manual

7
General information
# 1 and #2 Phillips
screwdriver
Pencil Ruler or tape measure and
straight edge
Carpenter square (optional)
Tin snips (for cutting
damper, if required)
Scissors (to cut
template, if necessary)
Electric drill with
3
/
16
", ½"
and ⅝" drill bits
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Gloves Saw (saber, hole or
keyhole)
Stud finder or Hammer
(optional)
Safety goggles
Level Duct and masking tape
TOOLS YOU WILL NEED
16 ½"
30"
5"
30" min.
Bottom edge of the
cabinet needs to be 30"
or more from the cooking
surface.
Backsplash
NOTES:
• The space between the cabinets must be 30" wide
and free of obstructions.
• This microwave oven is for installation over ranges up
to 36" wide.
• If you are going to vent your microwave oven to the
outside, see the Hood Exhaust Section for exhaust
duct preparation.
• If installing the microwave oven beneath smooth
flat cabinets, be careful to follow the instructions
on the top cabinet template for power cord
clearance.
• Maximum cabinet depth above and beside the
unit is 12".
• The dimensions provided are the minimum
required for mounting the microwave oven. Local
codes and the practical use of the range will
likely require you to provide more than the 13.5"
shown between the range and the bottom of the
microwave.
MOUNTING SPACE
12" max.
ME21R7051SS_SG_AA_DE68-04577A-00_EN.indd 7 3/21/2019 12:37:14 PM