Quick Guide
Table Of Contents
- Important safety instructions
- Electrical requirements
- Hood exhaust
- Damage - Shipment/Installation
- Parts included
- Tools you will need
- Mounting space
- 1. Placement of the mounting plate
- 2. Ventilation types (choose a, b or c)
- 3. Installation
- 4. Before you use your microwave
15
Step-by-step installation guide
B. ATTACH THE MOUNTING PLATE TO
THE WALL
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to a
wall stud.
1. Remove the toggle wings from the bolts.
2. Insert the bolts into the mounting plate through
the holes designated to go into drywall, and then
reattach the toggle wings so that ¾" of the bolt
protrudes beyond the wing.
INSTALLATION OVERVIEW
A. Prepare the Rear Wall (for outside back exhaust/
horizontal duct only)
B. Attach the Mounting Plate to the Wall
C. Prepare the Cabinet above
D. Mount the Microwave Oven
E. Connect the Ductwork (for outside top
exhaust/vertical duct only)
A. PREPARING THE REAR WALL FOR
OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for outside
exhaust.
C
L
• Read the instructions for outside back exhaust on the
REAR WALL TEMPLATE.
• Tape the REAR WALL TEMPLATE to the rear wall.
• Cut the opening, following the instructions on the
REAR WALL TEMPLATE.
CAUTION: Do not cut an opening in the rear wall if you
are installing the microwave with vertical duct or non-
vented ductless ventilation.
3. INSTALLATION
ME21R7051SS_SG_AA_DE68-04577A-01_EN.indd 15ME21R7051SS_SG_AA_DE68-04577A-01_EN.indd 15 2021-03-25 오전 11:32:312021-03-25 오전 11:32:31