Quick Guide

12
Step-by-step installation guide
A. OUTSIDE TOP EXHAUST (VERTICAL DUCT)
A1. INSTALLATION PROCEDURE FOR THE EXHAUST
ADAPTOR AND PROPER DAMPER OPERATION
CHECK
Blower Plate
Damper
Exhaust Adaptor
Retaining Hooks
Back of
Microwave
Oven
1. Slide the exhaust adaptor into place as shown in the
diagram above.
2. Make sure the tape securing the damper is removed
and damper pivots easily before you mount the
microwave.
CAUTION: You will need to make adjustments to assure
proper alignment with your house exhaust duct after
the microwave is installed.
A2. ADJUST THE EXHAUST ADAPTOR
After you have installed the microwave, you will need to
open the top cabinet and adjust the exhaust adaptor so
that you can connect it to the house duct.
Damper
For Side-toSide
Adjustment, Slide the
Exhaust Adaptor as
Needed
Back of
Microwave
Oven
NOTE: You must attach the house duct to the exhaust
adaptor after installation is complete.
House Duct
B. RECIRCULATING (NON-VENTED DUCTLESS)
B1. ADAPTING THE MICROWAVE BLOWER FOR
RECIRCULATION
1. Remove and save screw that holds blower plate to
microwave.
2. Lift up the blower plate.
Back of
Microwave Oven
Blower
Retaining
Screws
NOTE: The exhaust adaptor with the damper is not
needed for recirculating models. You may want to save
them for possible future use.
DE68-04108A-08_IM_ME18H704SFB_AA_EN.indd 12DE68-04108A-08_IM_ME18H704SFB_AA_EN.indd 12 2024-03-05 오전 11:50:122024-03-05 오전 11:50:12