DTB-9401F GB 0425 4/25/03 11:54 AM Page II MF68-00271A DIGITAL TERRESTRIAL RECEIVER
DTB-9401F GB 0425 4/25/03 11:54 AM Page III DTB-9401F Instructions for use REV. 1.
DTB-9401F GB 0425 4/25/03 11:54 AM Page IV DTB-9401F SAFETY INSTRUCTIONS This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY: AC 100~240V 50/60Hz OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS: Keep liquids away from the STB. CLEANING: Before cleaning, disconnect the STB from the wall socket.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 1 WARNING! 1. Follow these directions in order not to damage the power cord or plug. " " " " Do not modify or process the power cord or plug arbitrarily. Do not bend or twist the power cord too much. Make sure to disconnect the power cord with holding the plug. Separate heat appliances from the power cord as distance as possible in order to prevent the cover from being melted. 2. Failure to follow one of them may cause electrical shock.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 4 DTB-9401F CONTENT Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting Your DTB-9401F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DTB-9401F GB 0425 4/25/03 11:54 AM Page 5 1. USER SECTION 400 PROGRAMMABLE CHANNELS ADVANCED ELECTRONIC PROGRAM GUIDE MULTI LANGUAGE SUPPORTED FOR OSD SUBTITLE & TELETEXT(OSD & VBI) SUPPORTED WITH MULTI LANGUAGE FULL FUNCTION INFRARED REMOTE CONTROL UNIT AUTO AND MANUAL SCAN FACILITY CHANNEL ORGANIZING (PROGRAMMABLE) LOW POWER CONSUMPTION AUTO UPDATED EPG 2. TUNER SECTION 50~860 MHz WIDE BAND TUNER RF LOOP-THROUGH OUTPUT(MALE) FOR ANALOG RECEIVER 3.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 6 DTB-9401F CONNECTING YOUR “DTB-9401F” 1. LOCATION OF THE RECEIVER Your DTB-9401F should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. Avoid stacking other electronic components on the top of the receiver.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 7 Connecting Figure Note : In some region, the digital terrestrial signal may be weak. So you’d better use the antenna in which the booster was built, for watching the weak signal channels.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 8 DTB-9401F DESCRIPTION Front Panel 1 2 1. Infrared Sensor This is to receive the IR commands from the Remote Control Unit. 2. LED When the LED light Red, the set-top box enters the standby mode. When the LED light Green, it enters the operation mode.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 9 DTB-9401F DESCRIPTION Rear Panel 6 G I T A L T E R R E S T R I 5 4 3 2 1 1. AC MAINS This is to plug in the AC mains power cord. The input AC voltage range is 100V to 240V, 50Hz/60Hz supply. 2. DIGITAL AUDIO OUT Output for connection to a digital amplifier. 3. AV2(EXT) This is used to connect to your VCR. 4. AVI(TV) This is used to connect to your TV. 5. ANT. LOOP This is used to connect other receiver. 6. ANT.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 10 DTB-9401F DESCRIPTION Remote Control Unit N o t e : When inserting batteries, make sure that the polarity(+/-) is correct. 1. POWER This is used to switch the receiver ON/STANDBY mode. 2. 0-9 Numerical keys These keys are to enter numeric values and to select the channel directly by entering its number. 3. Pg+/Pg- These keys are used to move up or down pages the menu. 4. TV/RADIO This key is used to toggle between the TV channel and Radio channel.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 11 G I T A L T E R R E S T R I 5. MUTE This key is used to toggle between normal & muted audio. 6. FAV Use the key to switch between favorite lists. 7. EPG Electronic Program Guide button displays the TV/Radio Program guide. 8. LAST This key is used to call up directly whatever channel you were watching list. 9. TEXT(green) This key is used to select the subtitle mode. This button functions same as the green button on the menu.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 12 DTB-9401F BASIC FUNCTIONS 1. Display Screen Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: Channel Number Signal Status ● ● Program Information Current Favorite The number of soundtrack in current channel Press the red( i ) key in view mode.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 13 3. Select Soundtrack ● ● Press the ALT(yellow) key to see the soundtrack list. Press the / and OK key to select one. 4. Select Videotrack ● ● Press the ALT(yellow) key twice to see the videotrack list. Press the / and OK key to select one. 5. Service List ● ● Press the OK key to while you are viewing a program. Select list by pressing the TV/RADIO or FAV key.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 14 DTB-9401F BASIC FUNCTIONS 5.1 Service Favorites ● ● ● Press the green(TEXT) key on the control unit to select the Favorites list. Press the green(TEXT) key to toggle group and channel list. Use the / , Pg+/Pg- keys to select a favorite group that you want. 5.2 Service Alphabetical ● ● ● Press the yellow(ALT) key on the remote control unit to select the Alphabetical list. Press the yellow(ALT) key to toggle group and channel list.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 15 6. Program Information EPG-Electronic Program Guide The electronic program guide gives you a channel list for the channels. Note : 1. This service depends on service provider. 2. After receiver recognized the GMT-time from the signal which takes few seconds, it can display correct EPG information. ● Press the EPG key while you are viewing a program. This function is displayed on the screen by using only time.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 16 DTB-9401F BASIC FUNCTIONS 8. Teletext OSD When the current broadcasting program provides Teletext OSD, press the TEXT key twice to see the current Teletext OSD list. To change the Teletext OSD: ● ● Use the / keys to select a Teletext OSD you want. Press the OK key and then the Teletext OSD you want is displayed on the screen. 9.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 17 Main Menu After installing your antenna system and DTB-9401F with appropriate connectors. ● ● Plug in the AC main power and switch on the receiver. Press the MENU key to bring up the main menu. The following on screen display will appear: The sub menu topics will be displayed from 1 to 4. For the sub-menus 1, 2 and 3 you need the PIN Code. 1. Installation This menu consists of 3 sub-menus: Manual Scanning, Auto Scanning and Reset to Factory Default.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 18 DTB-9401F OPERATING THE RECEIVER 1.1 Manual Scanning To tune-in new channels and weak signals, the DTB-9401F has been provided with the option “Manual Scanning” where the channel data can be entered by the user. After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed: ● ● ● ● ● Select the channel which you want to find. Input the frequency of the channel you want to find. Select the bandwidth.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 19 1.2 Auto Scanning The sub menu “Auto Scanning” will enable download of the channels automatically from the preprogrammed load. To download channels automatically: ● ● ● ● ● Select the region which is possible in your location for Auto search. You can select All or Only Free option mode. All : Scanning all the channels Only Free : Scanning free channels Select the FFT (Fast Fourier Transform) Mode. You can select the value of 2K or 8K.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 20 DTB-9401F OPERATING THE RECEIVER 2. Channel Organising The “Channel Organising” menu has six functions: The “Channel Organising” menu is used to delete the Frequencies and Channels or to make Favorite channels or move channel as you want. ● Enter the PIN Code. If you have not entered your own PIN Code PIN Code 0000 applies, which was set at the factory. 2.1 Delete Frequency ● ● Select the desired frequency list you want to delete by pressing red( i ) key.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 21 2.3 Delete All Channels At the request window, press the OK key to delete all channels and press the MENU / EXIT to exit. 2.4 Delete Scrambled Channels At the request window, press the OK key to delete scrambled channels and press the MENU / EXIT to exit. 2.5 Favorite Channels You can immediately register the present channel to the desired Favorite Group. In addition, you can register a channel to multiple favorite groups.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 22 DTB-9401F OPERATING THE RECEIVER 2.6 Move & Edit Channel Select the TV/RADIO list with / keys. Select the TV/RADIO list with / or Pg+/Pg- keys. ● Select channel by pressing the red( i ) key. ● Press the / or Pg+/Pg- keys to change the position of the channel you want, and press the OK key for confirmation. ● If you want to return the channel to the initial position, do not press the OK key but press the blue(AUDIO) key.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 23 3. Parental Lock This “Parental Lock” feature sets viewing restrictions and prevents unauthorized access to your DTB-9401F through the PIN (Personal Identification Number), which is a 4 digit number. (The factory preset PIN Code : 0000) On selecting this menu, you will have two options: to set lock for any desired channel and to change your PIN value. ● Enter PIN Code.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 24 DTB-9401F OPERATING THE RECEIVER 3.2 Change PIN Code To change the PIN Code, select the second option “Change PIN Code”. This will take you to the following menu: In this option, you need to enter the current PIN Code at the first cursor, and at the second cursor enter the desired PIN Code. To confirm, you need to enter the new PIN Code again. Please remember the PIN Code should be a 4 digit numerical value. THE FACTORY PRESET PIN CODE : 0 0 0 0.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 25 4. System Setup This option enables you to change the factory preset system settings as per your requirements. 4.1 Language Selection The “Language Selection” option allows the user to select the desired language of the OSD, Soundtrack, Teletext, Subtitle or EPG. ● ● ● To accommodate user from different regions speaking different languages, OSD languages are available 18 languages.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 26 DTB-9401F OPERATING THE RECEIVER 4.3 Media Settings You can set the various media settings you want. Place the cursor on this sub menu and press the OK key. ● ● ● ● ● ● ● Press the / keys to move the sub items and press the / keys to select the option. Press the OK key to confirm. Press the MENU/EXIT keys to exit the menu. Select the TV system : PAL or SECAM.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 27 4.5 System Information If you have to contact your service provider or a service center they might ask for information available from this menu. Place the cursor on this sub menu and press the OK key. The following will be the on-screen display. 4.6 Software Upgrade You can download and upgrade the system software of the receiver through a specific channel through a specific channel designated by the broadcaster.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 28 DTB-9401F TROUBLESHOOTING In some region, the digital terrestrial signal may be weak. So you’d better use the antenna in which the booster was built, for watching the weak sinal channels. You can download and upgrade the system software of the receiver through a specific channel through a specific channel designated by the broadcaster. The Distributor will provide you with more information about that.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 29 Power supply Type : Input Voltage : Fuse rating : Power Consumption : Stand by : SMPS AC 100 - 240V 50/60 Hz 250 V/T1.6 AH Max.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 30 DTB-9401F TECHNICAL SPECIFICATIONS BASE-BAND AUDIO/VIDEO OUTPUT VIDEO Video Type : Interface : Impedance : Output level : PAL, SECAM 2 SCART (TV, VCR) 75Ω 1Vp-p AUDIO Inteface : Impedance : Output level : Frequency response : DIGITAL AUDIO (S/PDIF) : 2 SCART (TV, VCR) 600Ω 3.0Vp-p max (controllable) 3dB (20~15kHz) Connector : Fiber-Optic MEMORY Flash : SDRAM : 2MB 8MB PHISICAL SPECIFICATION Size (W x D x H) : Weight (Net) : 233 x 176 x 38 mm 0.
DTB-9401F GB 0425 4/25/03 11:54 AM Page 31 G I T A L T E R R E S T R I A L R E C E I V E R GB-31 DTB-9401F MEMO
DTB-9401F GB 0425 4/25/03 11:54 AM Page 32 MEMO
DTB-9401F GB 0425 4/25/03 11:54 AM Page 33 MEMO