Digital Terrestrial Receiver Owner's Manual

DTB-9401F
GB-18
DIGITAL TERRESTRIAL RECEIV
1.1 Manual Scanning
To tune-in new channels and weak signals, the DTB-9401F has been provided with the
option “Manual Scanning” where the channel data can be entered by the user.
After selecting the “Manual Scanning” from the Installation Menu, the following screen
will be displayed:
● Select the channel which you want to find.
● Input the frequency of the channel you want to find.
● Select the bandwidth.
You can select the value of 6, 7 or 8 MHz.
● Select the FFT (Fast Fourier Transform) Mode.
You can select the value of 2K or 8K.
● After select option, press the OK key to start the
scanning process.
OPERATING THE RECEIVER
DTB-9401F GB 0425 4/25/03 11:54 AM Page 18