Air conditioner User & installation manual Wi-Fi Kit 2.0 MIM-H04EN / MIM-H04N / MIM-H04NDZ •• Thank you for purchasing this Samsung Product. •• Before operating this unit, please read this manual carefully and retain it for future reference. SOL OCF Wi-Fi KIT 유럽향 IBIM_EN_DB68-08426A-00_.
Contents Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Checks before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety precautions This installation manual explains how to install a Wi-Fi Kit to an indoor unit of Samsung system air conditioners. Read the installation manual thoroughly before installing the Wi-Fi Kit. (Refer to the appropriate manual for installing product or other optional parts.) Hazards or unsafe practices that may result in severe personal injury or death. CAUTION Hazards or unsafe practices that may result in minor personal injury or property damage.
Safety precautions CAUTION •• Do not install the product in a place where it is or might be exposed to inflammable gas leakage. -- There is risk of fire or explosion. •• Do not install the product in a place where it will be exposed to oil or vapor etc. -- If the product is used in a place where it is exposed to oil, vapor or sulphur dioxide, parts of the product may get damaged or product may function abnormally. •• Make sure that water does not get into the Wi-Fi Kit.
Checks before Installation Accessories Cable ties (2) User & installation manual U-type terminals (6) Cable clamps (3) M4×16 screws (5) ENGLISH Wi-Fi Kit • The Wi-Fi Kit must be installed by a certified technician. CAUTION • Before installation, be sure to cut off power. • Follow applicable rules for electrical wiring. Make sure that the cables of the Wi-Fi Kit are installed inside a wall or covered to avoid being touched by the occupant.
Installing the Wi-Fi Kit Wi-Fi Kit installation CAUTION • To ensure smooth operation, there should be no obstacle between the Wi-Fi Kit and wireless router that may interfere with communication. When the Wi-Fi Kit is too far from a router or there are potentially interfering elements between them, it may cause problems with the performance of the Wi-Fi Kit that cannot be resolved by customer services. • Place the Wi-Fi Kit in an area where you can easily press the AP button for device verification.
F1 F2 V1 V2 F3 F4 3. Use two or more screws to fix the back cover to the wall. Connect the power cables (V1, V2) and communication cables (F1, F2) to the terminals on the back of the front cover while adjusting to a suitable length. 4. When connecting the power cables to V1 and V2, fasten the PCB terminal screws (CN5) to a torque of 6 N·cm or less. Screw size: M3 x 6 ENGLISH NOTE • You can connect up to 16 indoor units to a Wi-Fi Kit.
Installing the Wi-Fi Kit Wi-Fi Kit wiring diagram 1) Connecting to a single outdoor unit (F1-F2) F1 F2 R1 R2 F1 F2 F1 F2 F1 F2 F1 F2 V1 V2 V1 V2 F1 F2 F1 F2 F1 F2 V1 V2 V1 V2 F1 F2 CN2 BLK MIM-N10 CN3 RED CN4 (CN4, Blue) (CN3, Red) V1 V2 F1 F2 R1 R2 V1 V2 F1 F2 F1 F2 F1 F2 F1 F2 V1 V2 V1 V2 F1 F2 8 SOL OCF Wi-Fi KIT 유럽향 IBIM_E
2) Connecting to multiple outdoor units (R1-R2) R1 R2 F1 F2 F1 F2 F1 F2 F1 F2 R1 R2 F1 F2 F1 F2 F1 F2 V1 V2 ENGLISH F1 F2 V1 V2 F1 F2 Touch centralized controller DMS -- Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit. -- Connect the power cables to V1 and V2 of the indoor unit. -- Other controllers (e.g. touch centralized controller, DMS) can be installed together. CAUTION • You can connect up to 16 indoor and outdoor units.
Installing the Wi-Fi Kit 3) Connecting the Wi-Fi Kit and the ERV together (R1-R2) CN2 BLK MIM-N10 CN3 RED CN4 F1 F2 R1 R2 F1 F2 F1 F2 F1 F2 V1 V2 V1 V2 F1 F2 V1 V2 F1 F2 R1 R2 V1 V2 F1 F2 Touch centralized controller DMS -- Connect R1 and R2 on the outdoor unit to F1 and F2 of the Wi-Fi Kit. -- Connect the power cable to V1 and V2 of the indoor unit or ERV. -- Other controllers (e.g. touch centralized controller, DMS) can be installed together.
※※ For indoor units without V1 and V2 connection terminals, use the external control line 2 for SUB PBA (inside the indoor unit) for 12VDC power supply. BLK ENGLISH Connect the BLK line (black) to V2 ORG Connect the ORG line (orange) to V1 F1 F2 R1 R2 F1 F2 F1 F2 F1 F2 F1 F2 V1 V2 F1 F2 V1(ORG) CAUTION V2(BLK) • When installing the Wi-Fi Kit, use proper electrical cables considering the size of the wiring hole on the wall.
Installing the Wi-Fi Kit 6. Activate the Wi-Fi Kit. •• When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely. •• After the system operates, tracking is performed automatically. 7. Tracking ※※ Tracking: The Wi-Fi Kit detects connected indoor unit(s) and the indoor unit(s) detects the connection to the Wi-Fi Kit. Tracking is required to monitor or control the system air conditioner using the Wi-Fi Kit.
1. Install a separate Wi-Fi kit for each group. Example: if you have 3 separate groups/tenants, you must install 3 Wi-Fi kits. •• You can connect up to 16 Wi-Fi Kits to a single outdoor unit. CAUTION • If you connect multiple Wi-Fi Kits and perform tracking on them at the same time, you will not get reliable results. ENGLISH • When installing multiple Wi-Fi Kits, connect and perform tracking one by one.
Installing the Wi-Fi Kit 1) Press the [Search] button to find the connected Wi-Fi Kits. 2) One by one, select the MAC address for each Wi-Fi Kit from the list. -- You can see the MAC address on the label inside the Wi-Fi Kit. MAC: XXXXXXX 3) Set the tenant address. (Unavailable, 0-F) -- Seeing the table below, enter the tenant address on the S-NET pro 2.
Checking the Wi-Fi Kit ENGLISH Power LED Wi-Fi connection LED Wi-Fi setting LED AP button Reset button Items on the LED display Item LED indication Power supply Wi-Fi connection Wi-Fi setting 1 Initialized On On On 2 General On On Off 3 AP connected, Internet connection incomplete On Blinking Off 4 Tracking completed, AP connection incomplete On Off Off 5 Wi-Fi modem malfunctioning Blinking Blinking Blinking 6 Searching AP (AP mode) On Off
Installing the Wi-Fi Kit Initializing the user data •• To initialize the user data on a Wi-Fi Kit, press the (SW3) button inside the Wi-Fi Kit for 5 seconds. All the indicators illuminate and the user data is deleted. F1 F2 V1 V2 F3 F4 Updating with a Micro SD card ⓓ ⓒ Type Capacity File system Micro SD Max 4GB FAT16 Micro SDHC Max 32GB FAT32 1. Create a folder named “update" in the Micro SD card. Copy the latest software image and paste it into the folder created in the Micro SD card.
SmartThings app ENGLISH To use the SmartThings app, connect the product to the network in the sequence described below. The images shown may differ depending on your smartphone model, OS version and manufacturer. You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product is connected, you can use the SmartThings app via Wi-Fi, 3G, LTE or more wireless networks.
SmartThings app Downloading the SmartThings app and registering your Samsung account 1. Downloading the SmartThings app SmartThings (Samsung Connect) Samsung Electronics Co., Ltd. •• Search for "SmartThings" on Play Store or App Store, and download the SmartThings app to your smartphone. •• If the SmartThings app is already installed on your smartphone, update it to the latest version.
3) If the pop-up window does not appear, select “+", and then “Add Devices". My Home My home Add devices Living room > Select Living room > ENGLISH Select You can add a product you want to connect to by selecting it manually or by selecting “Auto detect". •• Select manually: Samsung > Air conditioner > System air conditioner •• Auto detect: [System a/c] Samsung Samsung Air conditioner Auto detect Select Select 2.
Starting the system air conditioner app Controlling the air conditioner Below are functions that you can control or monitor using the Wi-Fi adapter. Category Monitoring Function Desired Temp Displays the desired temperature. Current Temp Displays the current temperature. Filter warning An alert is generated after the filter time elapses. Defrost Power supply Operation mode Temperature control Fan speed Air flow direction Wind-Free Control Description Appears in the defrost state.
Troubleshooting Check the following before requesting a service from the Service Centre. Symptom Measure • Make sure you have connected the air conditioner to a wireless router. I cannot log in with my Samsung account. • Try recovering your ID and password from the Samsung account page. A failure message appears while adding devices. ENGLISH The installed SmartThings app cannot access the air conditioner. • This may fail temporarily due to the distance from the router or some interferences.
Troubleshooting Symptom Are all three LED indicators on the Wi-Fi Kit turned on? The controls of the SmartThings app do not operate. Does only appear on the display of the Wi-Fi Kit? Is the indicator blinking? Measure • Reset the Wi-Fi Kit and then check it again. • Make sure you have entered the correct Wi-Fi password when adding a device. • Check the router status. • Check that the wireless router is connected to the Internet.
Specifications MIM-H04EN Wi-Fi Transmitter Power (Max) 2412 - 2472 MHZ 17 dBm 5120 - 5250 MHZ 16 dBm 5250 - 5350 MHZ 16 dBm 5470 - 5725 MHZ 16 dBm ENGLISH Frequency Range * European Class A Warning : This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. * The product supports the IEEE802.11 a/b/g/n, Soft-AP communication protocol. (Samsung recommends IEEE802.11n.
Declaration of Conformity English Hereby, Samsung Electronics, declares that the radio equipment type appliance is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
Lithuanian Hungarian Samsung Electronics verklaart hierbij dat het type radiotoestel voldoet aan Richtlijn 2014/53/EU. De volledige tekst van de EG-Conformiteitsverklaring vindt u op deze website: De officiële Conformiteitsverklaring vindt u op http://www.samsung.com, ga naar Ondersteuning > Productondersteuning zoeken en voer de modelnaam in. ENGLISH Dutch Šiuo dokumentu „Samsung Electronics“ patvirtina, kad radijo įrangos tipo prietaisas atitinka direktyvos 2014/53/ ES reikalavimus.
Declaration of Conformity Norwegian Samsung Electronics erklærer herved at dette radioutstyret er i samsvar med direktiv 2014/53/EU. Den fullstendige teksten til EU-samsvarserklæringen er tilgjengelig på følgende nettadresse: Den offisielle samsvarserklæringen finnes på http://www.samsung.com. Gå til Support > Søk gjennom produktsupport og angi modellnavn. Turkish İşbu belge ile, Samsung Electronics bu radyo ekipmanı türü cihazın 2014/53/EU Direktifine uygun olduğunu beyan etmektedir.
French "La fonction WLAN 5 GHz de cet équipement ne peut être utilisée qu’à l’intérieur. Cet équipement peut fonctionner dans tous les pays de l’Union européenne." Italian "La funzione 5 GHz WLAN di questo apparecchio può essere utilizzata solo in ambienti interni. Questo apparecchio è adatto all’uso in tutti i paesi dell’UE." Latvian "Šī aprīkojuma 5 GHz WLAN funkciju var lietot tikai iekštelpās. Šo aprīkojumu var lietot visās ES valstīs.
Declaration of Conformity Manufacturer Samsung Electronics Co., Ltd. Product details Product : Model(s) : Varient Model(s) : Wifi-Kit accessory for air-conditioner & heat pump MIM-H04N MIM-H04, MIM-H04NDZ Declaration & Applicable standards We hereby declare, that the product above is in compliance with the essential requirements of the Radio Equipment Directive (2014/53/EU) by application of EMC EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.
Declaration of Conformity Manufacturer Samsung Electronics Co., Ltd. Product details Product : Model(s) : Varient Model(s) : Wifi-Kit accessory for air-conditioner & heat pump MIM-H04EN MIM-H04E, MIM-H04RN Declaration & Applicable standards We hereby declare, that the product above is in compliance with the essential requirements of the Radio Equipment Directive (2014/53/EU) by application of EMC EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.
SOL OCF Wi-Fi KIT 유럽향 IBIM_EN_DB68-08426A-00_.