Security Camera User Manual

10 – 10X MINI SMART DOME CAMERA
Introduction
PARTS NAME & FUNCTIONS
SCC-C6323❖
Main Unit / Surface Mount Bracket Back of Main Unit

Surface Mount Bracket
This is used to install the camera directly on the
ceiling. After separating this cover fi rst and then
attach this directly to ceiling. Camera must be
assembled at the last stage.
Do not use this bracket when installing camera on
the wall with wall mount bracket or on the ceiling with
ceiling mount bracket.
Separating Slit
Using a coin, you can separate upper part lower
body of the dome.
•
•
Dome Cover
Do not detach protection vinyl from dome cover
before fi nishing all installation process to protect
dome cover from scratches or dust.
DIP Switch
Adjusts camera ID and protocols.
Cable Duct
When you want to install the camera on the surface
of hard ceiling, you need to handle the cable through
side of the dome. In this case, break the side wall bit
and make the cable pass through the cable duct.
•
•
•
❖
Surface Mount Bracket
Dome Cover
Separating Slit
DIP Switch
Cable Duct