User manual

10 English
English 11
Listening to Radio
You can store up to:15 FM stations.
1. Press FUNCTION to select FM mode.
2.
To search
for a
satation
Press TUNING MODE button
Preset
Manually
...
...
Once or more times until
“PREXX(FM XX)” is displayed.
You can search the stored
frequencies in the Preset mode.
Once or more times until
“MANUAL” is displayed.
You can search the frequencies
one by one in the manual mode.
• MM-E330 display "PRE XX" and MM-E320
display "FM XX".
3. Se
lect the satation in any of the following ways:
◆ Press the TUNING/ALBUM
,
or
.
button on
the remote control.
◆ To fast scan for a frequency manually, press
and hold the TUNING/ALBUM
,
or
.
button.
4. Press MO/ST to switch between stereo and mono.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
• This applies only when listening to an FM station.
5. If y ou don’t want the preset, move back to step 3 and
select a different preset.
Otherwise,
a. Press ENTER.
b. Or, press the
[
,
]
button on the top panel or
TUNING/ALBUM
,
or
.
button on the remote
control to select a program number.
c. Press ENTER to save the preset.
6. To save other radio frequency, repeat steps 2
through 5 above.
In Tuner Mode
• To scan for radio frequencies in manual mode,
use the
[
,
]
buttons on the top panel.
• To stop scanning, press STOP (
@
).
• To scan for a preset in preset tuning mode, use
the
[
,
]
buttons.
About RDS broadcasting(Optional)
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional signal
along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
Description on RDS function
● PTY (Program Type) : Displays the type of
programme currently being broadcast.
● PS NAME (Program Service Name) : Indi-
cates the name of broadcasting station and
is composed of 8 characters.
● RT (Radio Text) : Decodes the text broad-
cast by a station (if any) and is composed of
maximum 64 characters.
● CT (Clock Time) : Decodes the real time
clock from the FM frequency. Some stations
may not transmit PTY, RT or CT information
therefore this may not be displayed in all
cases.
● TA (Traffic Announcement) : When this
symbol flashes it shows that the traffic an-
nouncement is in progress.
RDS may not operate correctly if the station
tuned is not transmitting RDS signal properly
or if the signal strength is weak.
About RDS DISPLAY function(Optional)
You can see the RDS signals the station sends on the display.
Press the RDS DISPLAY button while listening to an FM
station.
Eac h time you press the button, the display change
to show you the following information : PS NAME ;
RT; CT ; Frequency
Selecting a Stored Station
You can listen to a stored radio station as follows:
1. Press FUNCTION to select FM mode.
2. Press the TUNING MODE button on the remote
control until “PRE XX(FM XX)” is displayed.
• MM-E330 display "PRE XX" and MM-E320
display "FM XX".
3. Press
[
,
]
button on the top panel or
TUNING/ALBUM
,
,
.
on the remote
control to select a desired preset number.
MM-E320_E330-ENG_0110.indd 10 2012-3-29 10:38:35