User manual
8 English
English 9
Repeating One or All Tracks
on the Compact Discs
You can repeat playing CD indefinitely.
● CD containing a specific track.
● Whole tracks of a selected CD.
1.
Press REPEAT button.
Each time you press the REPEAT button,
the
repeat mode will change as following:
MP3 :
R OFF
;
R TRK
;
R DIR
;
R DISC
;
R RAN .
CD :
R OFF
;
R TRK
;
R DISC
;
R RAN .(MM-E330)
CD :
R OFF
;
R TRK
;
R ALL
;
R RAN .(MM-E320)
• Depending on your product,the repeat mode
display maybe different.
2.
When you wish to stop the Repeat function, press
REPEAT until "R OFF" is displayed.
• R OFF : Cancels Repeat Playback.
• R TRK : Repeatedly plays the selected track.
• R DIR : Repeatedly plays all tracks in the
selected folder.
• R DISC : Repeatedly plays the entire disc
• R ALL : Repeatedly plays the all tracks in the
disc.
• R RAN : Plays tracks in random order.
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly
search for a specific music passage on a track.
To search for Press
-
Fowards ...............
-
Backwards ............
)
button
(
button
Press and hold the
[
/
]
button on the top panel
to automatically scan for a track.
10 Skip Track
Press the +10 button while in playback mode.
This will skip the tracks as many as 10 from the current
track.
CD Programming
(This function is not available during playback of
an MP3/WMA-CD.)
● You can program the playback order of up to 24
tracks of your choice.
● However, you must stop playing the CD before
selecting tracks.
1.
While in CD playback mode, press STOP(
@
) to
stop playing the CD.
2.
Press the ENTER button to display the
message below:
(01= program number, --= track number)
3.
Use
[
or
]
to move to a desired track.
• Press
[
to move to the previous track.
• Press
]
to move to the next track.
4.
Press the ENTER
button to confirm your
selection,the selection is stored and
displayed.
5.
To select a different track, following the steps 3
to 4 above.
6.
Press PLAY (
p
) to play the programmed tracks.
7.
Press STOP (
@
) to stop playing the programmed
tracks, Press STOP (
@
) again to cancel playing
the programmed tracks.
• If you open the disc tray or turn off the
product, your programming will be canceled
.
Check and Edit the Programmed
Tracks
You can check a list of programmed tracks and edit
them as you want.
1.
If a programmed track is being played, press
STOP (
@
) once.
2.
Press ENTER twice to display the message
below:
(C=Check, 01= program number)
If a total of 24 tracks are already programmed, “C”
will be displayed rather than “P” in the display.
3.
Repeat pressing ENTER until the desired track is
displayed.
4.
Press
[
or
]
to select a different track.
5.
Press ENTER to confirm your selection.
6.
To play the programmed tracks, press PLAY (
p
).
MM-E320_E330-ENG_0110.indd 8 2012-3-29 10:38:33